ReviewsBrass Floating Ball Valve

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

...male BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to worry about leaks occurring, ball valve dn10 will definitely save your time and money..
【 Easy to Use 】 Ball valve for foam cannons withstand high pressure operation while providing good leverage, opening and closing pressure washer ball valve effortlessly, allowing safe and easy tool replacement. Helps you switch easily without shutting down the entire system, making your work easier and more convenient..

Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

...m the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with dif....

Check Stock

Motorized Ball Valve- 1/2\ Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid

SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
This electrical ball valve is full port, meaning the bore in the ball is a full1/2”.
This minimizes pressure loss through the valve.
9V-24V AC/DC- Works effectively over entire voltage range.
Limit switch minimizes power after valve is fully open.
Ideal for projects where an automatic return is necessary.
2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening.
Returns to fully closed if power is removed.
ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.

Check Stock

1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/4" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

Siphon Pump 1/2" Hand Gasoline Siphon Hose for Gas Fuel Transfer Diesel Water Self Priming Shaker Safe Syphon Pump Auto PVC Sipnon Hoses, 6 Feet

...it up and down about an inch. In just seconds the siphon hose is full and flowing. A siphon only works if the outlet end is lower than the inlet and the liquid is deep enough to jiggle the ball..
♠PREMIUM QUALITY MATTERIAL: Siphon pump for gasoline with thick hose wall, it can endure long time use with no crushed. Brass nozzle, PVC tube and industrial strength glass ball make it anti-static and safe for gasoline oil fuel diesel transfer..
♠NYLON TIGHTEN BAND: Gas siphon with a nylon tighten band on brass valve end, you don't worry that the copper head come off from the tube and go into your car oil tank. Before use, please pull the nylon zip tie to keep the brass valve more tightening. Don't pull it out by force..
♠WIDELY USE: Our syphon hose kit efficiently transfers gasoline, diesel, water, oil and urea for car on the go without electricity. Perfect for small household chores, lawn and garden, and outdoor activities. Don't suck gasoline into your mouth any more..
♠ATTENTION: Auto siphon inner diameter 0.56"(1.4cm) and outside diameter 0.72"(1.8cm), brass valve end inner diameter 0.8"(2cm) and outside diameter 0.88"(2.2cm), please measure your container before purchasing and ensure suitalbe fitting, no smaller than our hose and brass valve size.....

Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
This minimizes pressure loss through the valve.
9V-24V AC/DC- Works effectively over entire voltage range.
No power expended once fully open or fully closed.
3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.

Check Stock

Oupeng sky Brass Garden Hose Shut Off Valve,Heavy Duty Brass Shut Off Valve Garden Hose Connector, 2 Pack Heavy Duty 3/4 Inch Solid Brass Garden Hose Shut Off Valve with 4 Extra Rubber Washers.

The garden hose connector size thread standards: 3/4″ GHT thread easy to turn on and off.Adjustable flow control.Brass handle is ergonomically designed to make it more comfortable to use and easy to regulate water flow.The hose connector can be widely connected among all kinds of faucets and hoses with 3/4″ standard thread..
Easy to use & extensive： Swivel connection, perfect for garden nozzle, sprayers, watering tools, accurate attachment to faucet or spigot.It’s perfect for garden hoses and power washer, RV, boat or anywhere there’s a standard 3/4″ garden hose connection..
Brass Garden Hose Shut Off Valve： 3/4 in Solid Brass Shut Off Valve Garden Hose Connector, 2 Pack Heavy Duty Water Hose Turn Off Ball Valve Adapter Fittings with 4 Extra Hose Pressure Washers.The hose washers are made of soft, resilient rubber for a water-tight seal. Made to resist hardening and cracking..
Heavy Duty brass one way valve,Well made, zero leaks. If you have any questions about these products, please contact us and we will help you solve them as soon as possible..
Garden Hose Valve：Extreme Duty Brass Shut Off valve,brass one way valve,Solid Brass Construction,no leakage.You can use these to attach to end of hose then you coul....

Check Stock

COOLWHEEL Bicycle Presta and Schrader Valve Adapter - 15 Pcs Bike Brass DV AV SV Tire Valve Inflator Adapters Set,Ball Pump Needle Inflation Devices & Accessories for Bike Tire Air Compressor

PREMIUM QUALITY - These valve adapters are made of solid brass & ABS plastic with threads,the rubber ring gasket will not leak easily, which is strong and durable for long term of use..
PORTABLE TO CARRY - The valve adapters take up very little space and very convenient to carry. You can place them in any backpack or pockets when riding and will not easy to lose..
EASY TO USE - Convenient to install and use, kids can also use the tapered nozzle for inflatable toys and balloon easily.These are ideal daily tool for most family to bike tire valve pumping, sport balls and other inflatable equipment..
VALVE ADAPTOR KIT - The 15 Pcs various sizes and specifications of bike inflator pump kit including 6 x DV/SV bike tire valve adapters, 2 x AV valve adapters, 2 x SV valve adapters, 2 x ball pump metal needles, 1 x solid brass tapered inflatable nozzles, 2 x black ABS tapered inflatable nozzles..
WIDE APPLICATION - These are suitable for mountain bikes, road bikes and stationary bicycles with Presta valve tubes, also can be used for inflatable toys, swim ring, balloons, sport balls such as basketball, football, volleyball, rugby, yoga ball,etc..

Check Stock

R134A R410A R12 R22 Refrigeration Charging Hose Set with Ball Valve 3 Color Coded Hoses/w Ball Valve 1/4 SAE Thread Connector for Air Condition Refrigeration Charging Tools AC HVAC Maintenance Kit

WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R134A, R22, R12, R502, R404..
HIGH WROKING PRESSURE --- 7" length ball valve hvac charging hose completed with solid brass manual shut-off ball valve. Rated working pressure: 3000....
PREFECT DESIGN --- HVAC hoses with ball valves designed to meet standard 1/4 inch SAE female refrigerant charging hoses set with shut off of red, blue....
EASY INSTALLATION --- R22 charging hose and ball valve set design with 45 degree angle on the service port site for easier access. Can be operated....
PREMIUM QUALITY --- Refrigerant hose made of high-quality brass alloy and rubber, last long. Strong sealing for durability and safety. Necessary tools....

Check Stock