ReviewsBrass Gunsmith Hammer

Wheeler Master Gunsmithing Interchangeable Hammer Set

  • Includes 2 hammer bodies, one small and one large, and 8 hammer faces.
  • 4 hammer faces with each hammer body: metal, brass, nylon and rubber.
  • Plastic head-non-marring, steel head-for metal punches and surfaces, brass head-for preventing marring of metal surfaces, rubber head-low recoil and....
  • Simply unscrew each head and put on a different one.
  • Comes with durable molded case that organizes, holds and protects components.
Check Stock

Xage 9 Pieces Roll Pin Punch Set – Tool Kit for Jewelers/Gunsmith/Watch Makers/Repairs and Crafts with 1 Double faced mallet

  • ★High quality: This roll pin punch set is made of highly quality hardened 40# steel, drop forged, heat treated & knurled steel for extreme durability, workability.
  • ★Full set roll pin punch: 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”punch size, this roll pin punch set kit is perfect tool for gunsmith, jewelers, watchmakers, engineers, carpenters – use on Guns, Machinery, Vehicles, Woodwork and Crafts, a great help of ar15 tools.
  • ★Great grip: The knurled handles are deeply cut and let you get a good grip on it while striking with a hammer.
  • ★Safe hemispherical recessed roll pins: Hemispherical recessed tips to cradle the roll pin, so it won’t cause scratches or damage to your firearm.
  • ★Double-faced soft mallet: The double-faced design of the hammer consists of a yellow polyurethane rubber head for a cushioned strike and black oil-resistant rubber head for an oil surface(Missing Parts will Be Replaced, Just Contact Us).
Check Stock

Bastex 1 Pound Brass Metal Stamping Hammer. Short Handle Design with Flat Mallet Head for Jewelry Making and Personalizing.

  • GENERAL USAGE: The Brass 1 pound metal stamping hammer was designed for metal stamping. It has a smaller and scaled down grip designed for easy handling and precision striking. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time. This hammer is great for the beginner and intermediate stamper. Also works great for flattening wire for jewelry making.
  • QUALITY: The brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job. Sturdy and grooved grip allows for maximum and precise strikes. The head is firmly attached to the handle. Please note that brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow..
  • PRECISION: Because of it’s scaled down grip and 1 pound brass head every strike will be more accurate resulting in a much better craft and customization of your jewelry or leather workings. Helps to prevent double impressions and protects the longevity of your stamps. Brass is much better than steel for metal stamping because it disperses the energy of the hit into the stamping blank..
  • SIZE & DIMENSIONS: Hammer head is about 1 pound in weight and grip is ab....
Check Stock

OWDEN Jewelry Metal Stamps kit for Jewelry Stamping Making,Size:(1/8\

  • OWDEN Professional metal stamps set inculding one set 27Pcs art font letter punch set (Uppercase) and one set 27Pcs art font letter punch set (Lowercase) and one set 9Pc art font number punch set , One metal crafter hammer and one metal bench block..
  • Letter punch (Uppercase)+ Letter punch (Lowercase) + Number punch are same art font ,Size: 3mm (1/8") You can freely form continuous phrases and digital imprints. (All stamps plastic case patented).
  • The professional design metal stamps hammer have 3 heads for use. One steel hammer head is fixed to the hammer body, The brass and nylon hammer heads will replace when you tap different tools. This is an essential professional hammer for artists (Patented).
  • OWDEN designed round steel bench block for jewelry & stamping working, Size: 3”x3/4” , The steel part is mirror finished and chrome plated.(No rebound design),The base is made of soft plastic and wraps the bottom of the steel part. The soft bottom helps reduce the rebound force when tapping. It will make the patterns or letters that we work more perfect..
  • The metal stmaps letter and number punch set with hammer and metal bench block use for jewelry stmaps ,You can leave a commemorative memory in brass,copper,steel,aluminum,wood,leather Etc material ..
Check Stock

PH PandaHall 1 Pound 30mm Brass Solid Brass Hammer with Wood Handle for Jewelry Craft Making Tools

  • Brass Head: Drop forged brass head is spark resistant.
  • absorbs impact and reduces damage on surface being hit.
  • can be used safely in combustible environments..
  • Wooden Handle: The hammer handle is made of high quality wood. The precision polishing process makes it feel more comfortable. With the reasonably designed length, this hammer is easy to operate..
  • Precision Machined: They are hot forged, machined with high precision and heat treated to provide the best combination of hardness and resistance to blows..
  • Tight Connection: This hammer adopts special inlay process to make the connection between the hammer head and the hammer handle closer and not easy to fall off, even if it is beaten vigorously..
  • Wide Usage: Great for jewelry making and DIY projects.
  • Ideal jewelry tools for forming, jewelry repairs, flatten wire or other metal pieces..
Check Stock

GRACE USA Gun Care Tool Set In Nukaf Case, Tools for Gunsmiths, Includes Screwdrivers, Brass Punches and 17 Tool Set, Made in USA

  • SET INCLUDES: 8 piece gun care screwdriver set, 8 piece brass pin punch set, & 8 oz brass hammer.
  • SCREWDRIVER SET: Custom hollow ground to fit scope screws, plug screws, guard screws, floor plate, sight screws, and many other gun screws.
  • BRASS PUNCH SET: Consists of eight brass pin punches sizes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16".
  • 8 OZ BRASS HAMMER: Hand-turned from CDA 360 brass rod, extruded in a USA mill, beautifully hand-polished.
  • GRACE USA TOOLS ARE PROUDLY 100% MADE IN THE USA.
Check Stock

BadAce Low-Profile Picatinny Rail NDT (No Drill-Tap) Scope Mount for Swiss K31

  • LP (Low-Profile) version features a newly designed integral brass deflector that allows reliable shell ejection to the right.
  • Rock solid, no gunsmith required, easy installation in 20 minutes.
  • The ingenious arc-shape base design ensures perfect bore alignment for the scope mount.
  • Solid Steel Base Nut guarantees rock-solid mounting.
Check Stock

C&T 3-Piece Hammer Set,Jacketed Fiberglass Brass Hammer,16, 24, 32oz

  • Fiberglass brass hammer, is drop-forged with pure brass, provides you with the protection power to complete jobs perfectly..
  • The brass hammer is also manufactured to reduce sparking, and prevent excessive damage to the steel surface, such as mold and automotive accessories..
  • High-strength fiberglass handle is protected by an impact-resistant poly jacket. A high-quality fiberglass handle with texture ensures to prevent any slippage..
  • Permanent head-to-handle epoxy bond will not loosen over time..
  • Brass mallet will effortlessly meet the demands of striking chasing tools or professional flattening. It is more suitable for lighter hitting, non-sparking explosion-proof environment, High-temperature environment & when you need to protect object surface works..
Check Stock

Brass Metal Stamping Hammer For Jewelry Making (2 Pound)

  • FEATURES: Solid Brass Head with Flat and Domed Ends.
  • Rubber Coated Short Handle for Easy Grip and Accurate Strike..
  • MEASUREMENTS: Head 2 1/2in Long, Diameter 1 1/2in, Overall Length 10 Inch..
  • The Professional Hammer Specially Designed for Metal Stamping..
  • Brass Metal Stamping Hammer Overall Weight 2 LB..
Check Stock

OWDEN Metal Stamps for Jewelry Making, Art Font Uppercase Letter Punch Set and Art Font Lowercase Letter Punch wtih 1 Set Number Punch Set Size:1/8\

  • OWDEN Professional metal stamps set inculding one set 27Pcs art font letter punch set (Uppercase) and one set 27Pcs art font letter punch set (Lowercase) and one set 9Pc art font number punch set , One metal crafter hammer and one metal bench block..
  • Letter punch (Uppercase)+ Letter punch (Lowercase) + Number punch are same art font ,Size: 3mm (1/8") You can freely form continuous phrases and digital imprints. (All stamps plastic case patented).
  • The professional design metal stamps hammer have 3 heads for use. One steel hammer head is fixed to the hammer body, The brass and nylon hammer heads will replace when you tap different tools. This is an essential professional hammer for artists (Patented).
  • OWDEN designed round steel bench block for jewelry & stamping working, Size: 3”x3/4” , The steel part is mirror finished and chrome plated.(No rebound design),The base is made of soft plastic and wraps the bottom of the steel part. The soft bottom helps reduce the rebound force when tapping. It will make the patterns or letters that we work more perfect..
  • The metal stmaps letter and number punch set with hammer and metal bench block use for jewelry stmaps ,You can leave a commemorative memory in brass,copper,steel,aluminum,wood,leather Etc material ..
Check Stock

Gunsmith Let’s Assume I’m Right Gun Engraver Gunsmith T-Shirt

  • For example, in a gunsmith shop, the master gunsmith creates and refines rifles with his gunsmithing tools. A creative idea for any Gunsmith in the family or circle of friends for their birthday..
  • A cool motif for a gun engraver who love their profession and the noble handling of weapons of all kinds. A funny accessory for any pistolsmith or custom gun builder who works in a gunsmithing workshop making hunting weapons or rifles..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock