ReviewsBrass Insert Nuts

Anderson Metals-50066-0604 Brass Tube Fitting Coupling 3/8 Compression x 1/4 Female Pipe

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminium, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Anderson Metals 50062-06 50062 Brass Compression Tube Fitting Union 3/8 x 3/8 Tube OD

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Brass Compression Tube Fitting, Union Assortment Kits, 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ OD (5pcs)

  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Anderson Metals - 50065-04 50065 Brass Compression Tube Fitting 90 Degree Elbow 1/4 x 1/4 Tube OD

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Canitu 420Pcs M2 M3 M4 M5 Female Thread Knurled Nuts Threaded Insert Brass Embedment Nuts Heat Set Assortment Kit Embed Parts Pressed Fit into Holes for 3D Printing Plastic etc

  • ☼【Performance】These heatset inserts can be widely used on the injection moulding for tightly fixing. Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. e.g. Using a normal soldering iron, you could easily set them into 3D printed holes. The plastic is formed around the brass insert. It would be better to put something in the threads to keep plastic from melting into the center.
  • ☼【Premium Brass】All the nuts are made of premium brass, which has high hardness, no deformation, durable, resist heat and reliable for long time use. Smooth surface with no burr, standard circular, deep threads, small tolerances, neat and clean, firm and uniform, easy to install.
  • ☼【Application】Widely used in mobile phones, laptops, various plastic casings, communications, micro-motors, computers, electrical appliances, electronics, toys, watches, lighting, locomotives, etc, also apply to circuit board assembly and in the field of electronics..
  • ☼【420Pcs of 15 Size】 You will get 30 pieces of each size and a good helper on your work need. All kinds of knurled nuts are well classified and packaged in a plastic box for easy access the right size..
  • ☼【Hassle-free Service Warranty】Your satisfaction is our greatest ....
Check Stock

Hilitchi 460 Pcs M2 M3 M4 M5 Female Thread Brass Knurled Threaded Insert Embedment Nuts Assortment Kit, Embed Parts, Pressed Fit into Holes for 3D Prints and More Projects

  • ✅【Well MADE AND QUALITY】These female thread brass knurled threaded insert embedment nuts are made of durable brass. High strength without deformation, abrasion and corrosion resistance and with beautiful and practical.
  • ✅【EXCELLENT WORKMANSHIP】Smooth surface with no burr, standard circular, firm and uniform, easy to install. We meet all your needs. Assortment kit or one specific size, we have it all..
  • ✅【STRANDARD AND COMPLETE THREAD】Deep thread, neat and clean, not easy to strip during rotation, stable and reliable. Convenient operation, good texture, greatly improve your work efficiency.
  • ✅【A MUST HAVE】These heatset inserts can be widely used on the injection moulding for tightly fixing. Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. Also apply to circuit board assembly and in the field of electronics. The plastic is formed around the brass insert. It would be better to put something in the threads to keep plastic from melting into the center. Using a normal soldering iron, you could easily set them into 3D printed holes..
  • ✅【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please feel free to contact us. We would work out a satisf....
Check Stock

Breezliy 1/4 Inch OD Brass Compression Insert,Sleeve Ferrule,Nut 75PCS

  • ★Material: Brass corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★Package Include: 30pcs compression sleeves ferrules, 15pcs nuts, 30pcs compression Insert ,Total is 75pcs..
  • ★Application: Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
  • ★Please feel free to contatct us if you have any questions about our product..
Check Stock

Glarks 175Pcs M4 M5 M6 M8 M10 Threaded Insert Nuts Kit Including 7 Sizes Hex Socket Screw Inserts and 6 Sizes T-Nuts 4 Pronged Tee Blind Nuts with Hex Wrenches for Wood Cabinet Furniture

  • ➤[Package Includes]: This package includes 60pcs 6 sizes alloy steel threaded insert nuts: M4 x 10, M5 x 10, M6 x 10, M6 x 15, M8 x 20, M10 x 25.
  • 50pcs 5 sizes carbon steel threaded insert nuts: M6 x 10, M6 x 15, M8 x 15, M8 x 20, M10 x 25.
  • 60pcs 6 sizes T-nuts: M5 x 8, M6 x 10, M6 x 16, M8 x 10, M8 x 16, M10 x 20.
  • and 5pcs M4/M5/M6/M8/M10 hex wrenches, which are well packed in a transparent plastic box for convenient transportation and storage..
  • ➤[High Quality Material]: These furniture screws are divided into 2 set, one set is made of zinc alloy steel, and the other set is made of carbon steel, both feature rust, corrosion and oxidation resistance, durable enough to withstand bad weather and environment change. T-nuts are made of zinc alloy steel, zinc coated makes it stronger and last longer than other nuts on the market..
  • ➤[Threaded Insert Nuts]: Threaded insert nuts design with flat standard hex socket head to make nuts head at the same level with applied surface, and maintain the surface of applied furniture clean and tidy. Fully threaded inserts can insert into wood firmly, not easy to pull out..
  • ➤[T-Nuts]: These T-nuts with serrated design can extend the surface between the nuts and work piece, non-slip and easy to lock. The compact thre....
Check Stock

Anderson Metals - 50069-0606 50069 Brass Compression Tube Fitting 90 Degree Elbow 3/8 Tube OD x 3/8 NPT Male Pipe

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Anderson Metals Brass Compression Tube Fitting 90 Degree Elbow 3/8 Tube OD x 1/2 NPT Male Pipe 50069-0608 Copper

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Hilitchi 250-Pcs M2 / M3 /M4 Female Thread Brass Knurled Threaded Insert Embedment Nuts Assortment Kit

  • ♛ High Quality Knurl Thread Inserts Nuts Assortment Kit.
  • ♛ Package Quantity: 250pcs - Packed in A Rugged Convenient Re-sealable Plastic Storage Case.
  • ♛ Made of Bass Material, Featured With Heat Resistance.
  • ♛ These Knurl Thread Insert Nut Can Be Widely Used On the Injection Moulding for Tightly Fixing.
Check Stock