ReviewsBrass Meter Connection Fitting

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

... is made of high-quality brass, being sturdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one unit, compact lightweight construction, convenient for use. Argon Regulator is a ideal choic....

Check Stock

Bonbo Fuel Gas Cap with Brass Hose for Honda EU2200i EU1000i EU2000i EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT Generators, Upgrade Extended Run (Red)

Application - This fuel gas cap can be widely used in Honda EU2200i EU1000i, EU2000i, EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT generators..
Function - As a fixed connection between plastic or rubber hose and pipe, this gas cap with brass hose fitting helps you add gasoline into generator within a safe distance, ensuring seal tight and no leakage..
Design - The brass hose fitting has a 1/4" male end for connecting to threaded pipe, conforming to National Pipe Thread (NPT) standard and the barbed fitting for a hose is equipped with a 1/4" inside diameter..
Material - The gas cap is made of premium CNC billet aluminum, finishing with stylish anodized red coat. And the hose fitting is made of top high quality and wear resistance brass, performing well even under extreme conditions..
Satisfaction Guarantee - Bonbo aims to provide best products and services for our customers. If you receive broken or defective gas cap and brass hose fitting, please contact us any time, we will compensate you with 1 year warranty or 30 days full refund..

Check Stock

Argon CO2 Flow Meter Regulator with 80 Inches 6.6Ft Gas Hose for TIG MIG Welder 10 to 60 CFH - 0 to 4000PSI Pressure Gauge CGA-580 Inlet Precise Brass Flow Meter

[APPLICATIONS] - Our gas pressure regulator/flowmeter can be used with a variety of gas cylinders including argon, helium, nitrogen, and argon/carbon....
[CGA580 CONNECTION] - The Flow Meter Regulator is suitable for standard Gas tanks with CGA-580 inlet connection, with a unique filter port design on....
[MEASUREMENT UPGRADE] - The 4000PSI gas meter is more widely used than 3500PSI. If you need to measure more corrosive gases, facing some special....
[RELIABLE QUALITY] - The body of our gas flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The....
[PACKAGED WITH HOSE] - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and....

Check Stock

E-cowlboy 6.0L for Powerstroke Fuel Pressure Test Fitting Adapter for 2003-2010 Ford Diesel Engine(with Schrader Valve)

FITMENT - Fit perfectly on 2003 2004 2005 2006 2007 2008 2009 2010 Ford 6.0L diesel engine..
1/4" SCHRADER CONNECTION - This fitting has an OEM 1/4 inch Schrader connection which is the most common connection size for almost any fuel pressure test kit..
EXCELLENT FUNCTION - Low fuel pressure is one cause of premature 6.0L injector failure. This fitting not only makes checking fuel pressure easily, but also boost fuel pressure and increase injector life..
SUPERIOR MATERIAL - CNC Machined from high quality Brass material which has excellent mechanical and physical properties, ensure a perfect fit with exact tolerances for problem-free performance and long term service..
100% SATISFACTION GUARANTEE - If you're not 100% satisfied with E-cowlboy Fitting, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.

Check Stock

RapidAir MaxLINE Compressed Air Piping 1' Tee M8012 Max Line Rapid Air New

MaxLINE 1" piping tee fitting Part Number M8012.
This MaxLINE Tee is specifically designed for the MaxLINE 1" tubing made by RapidAir and is great for adding extra tubing in multiple directions or adding extra air outlets..
This fitting is made of solid brass and has a double o-ring seal for a no leak connection..
It has split ring connections for easy disassembly if needed, and is rated for 175 PSI working pressure..
Solid Brass with Nickel Plating for Maximum Corrosion Resistance.

Check Stock

Propane Torch Hose Weed Burner Hose Weed Torch Hose Heating Torch Extension Hose (6.5 Feet)

-Note: POL connection propane tank. Thread diameter at the other end: 5 / 8 (reverse thread / left-hand thread).
-Note: This hose for propane heating torches only..
-Connection: Ball seat reverse internal thread swivel fitting with leather ring to prevent gas leakage..
-Specification: rubber& solid brass, 6.5 feet-long, long-lasting rubber and solid brass fittings. Working Pressure: 0-350 PSI.
-CSA certification ensures excellent sealing quality..

Check Stock

Gas ONE Propane Y-Splitter Tee Solid Brass with 1-Male QCC and 2-Female QCC for BBQ Grill, Heater, Propane appliances

USE YOUR 2 FAVORITE PROPANE APPLIANCE WITH 1 PROPANE TANK - Gas One’s Y-splitter allows for the use of two propane hoses / two propane appliances to be fueled by one 5-20lb propane tank.
UNIVERSAL FITTING CONECTION - Gas One’s Y has a universal fitting (QCC-1) made for standardized propane gas appliances. An easy to install connection for a wide-range of cooking and heating purposes. *switch to y-splitter function*.
SOLID BRASS CONSTRUCTION - Built with a solid brass construction to ensure a sturdy and durable connection, with sufficient heat resistance.
UPER EASY HASSLE-FREE INSTALLATION - Gas One’s Y-Splitter is ready to use right out the box, just simply attach the splitter to your propane tank, propane appliance and it’s ready for use.

Check Stock

Stanbroil 3/8\ X 12\ Non-Whistle Flexible Flex Gas Line Connector Kit for NG or LP Fire Pit and Fireplace

Easy to installation and use, highly durable, Corrugated flexible flex gas line with feature of high temperature resistance.
3/8" OD x 1/4" ID 12 inch Stainless steel pipe coated black gas line with fittings.
3/8" Male Flare x 1/2" Male NPT fitting end, 3/8" Male Flare x 1/2" Female NPT Fitting. Brass 90 degree fitting for customer connection convenience.
CSA certified, fit for NG or LP fireplaces and 003c90K BTU with a 3/8" Connection Hub fire pit and fireplace burners.
There is a staggered pitch every 2" to Eliminate Whistling.

Check Stock

STYDDI Low Pressure 3/8inch Male Flare Propane Adapter Conversion Fitting with Elbow 90 Degree for Blackstone Tabletop Grill Compatible with Blackstone 17 Inch and 22 Inch Portable Gas Griddle

SPECIFICALLY DESIGNED FOR BLACKSTONE 17”and 22”TABLETOP GRIDDLES. The connector is specifically designed to work with the blackstone 17" & 22"....
CONNECT YOUR GRILL TO RV OR TRAILER LOW PRESSURE SYSTEM WITHOUT REGULATOR. The adapter converts your 17inch and 22 inch Blackstone Grill to a 3/8 male....
3/8”MALE FLARE PROPANE ADAPTER PLUG SERVES MANY PURPOSES. This adapter helps convert a Blackstone griddle to allow connection to the low pressure....
90 DEGREE ELBOW DESIGN SAVES MORE SPACE. Different from the shape of other product on the market, this adapter fitting is designed as 90 degree elbow,....
100% SOLID BRASS CONSTRUCTION FOR DURABILITY. Made of premium material of 100% brass, the fitting provides secure and safe connection from your grill....

Check Stock

0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing

Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.

Check Stock

Argon CO2 Regulator Gauge Welding Gas Regulator with 6.6Ft Gas Hose CGA580 Inlet Connection 0-4500PSI/0-10BAR Input Pressure

【CGA-580 Connection】The Argon regulator with CGA-580 Inlet Connection fits standard Argon, CO2 Gas Tanks from any supplier. The gas regulator is a standard pressure control valve that reduces the input pressure from gas stored in a tank.
【Accurate Pressure Gauge】Input pressure: 0-4500PSI. The Argon CO2 Regulator has two Easy to read pressure gauge, the argon flow meter provides accurate measurement of gas. And it has Internal safety pressure relief design to protect you form danger..
【Brass Material】Our welding gas regulator is made of solid brass, so the surface can keep a good looking for a long time. Precision thread design ensures high sealing performance and avoids gas leakage..
【General Feature】A 6.6Ft gas hose ensures your tanks at a safe distance from your Mig Tig welding projects, 5/8'' Female and 9/16" male outlet connection. And the filter structure at the CGA-580 connection effectively prevent debris in the argon tank entering the gauge with the airflow..
【Application】Our welding regulator is pefect for MIG and TIG welding. It is an economic alternative for you to get more precise gas metering, like the accurate reading of argon regulator would help you to adjust pressure before welding..

Check Stock