ReviewsBrass Outlet Valve

LuckyHigh 2pcs Dual Welding Gas Gauges Oxygen (CGA-540) and Acetylene (CGA-510) Regulators Combo Solid Brass Gas Welder Regulator

  • Oxygen Regulator fits welding Oxygen Tanks with CGA-540 Valve.
  • Propane Regulator fits welding Propane tanks with CGA-510 valve..
  • Oxygen Outlet Pressure: 0-200 PSI,Acetylene Outlet Pressure: 0-30 PSI.
  • Oxygen Inlet: 0-4000 PSI,Acetylene Inlet: 0-400 PSI.
  • Welding Gas Gauges are made of solid brass..
Check Stock

Thermostatic Mixing Valve with 1/2 NPT Male Connections,Water Temperature Control Valve,Solid Brass

  • US STANDARD FITTINGS -Coming with 3 PCS G1/2 British straight thread to 1/2NPT adapters..
  • Markings in fahrenheit,outlet water temperature range: 68°F -122°F..
  • Premium brass body: one-piece sturdy brass (non-plastics) faucet body ensures quality and longevity..
  • If you need temperature over 100°F, just press the red button while rotating the valve.
  • It’s suitable for to pipe water valve, use for wash basin, bidet, shower, bathroom, washroom, kitchen, wash and etc..
Check Stock

Siphon Pump 1/2" Hand Gasoline Siphon Hose for Gas Fuel Transfer Diesel Water Self Priming Shaker Safe Syphon Pump Auto PVC Sipnon Hoses, 6 Feet

  • ♠SHAKING SIPHON: You only need stick siphon pump down in the liquid and shake it up and down about an inch. In just seconds the siphon hose is full and flowing. A siphon only works if the outlet end is lower than the inlet and the liquid is deep enough to jiggle the ball..
  • ♠PREMIUM QUALITY MATTERIAL: Siphon pump for gasoline with thick hose wall, it can endure long time use with no crushed. Brass nozzle, PVC tube and industrial strength glass ball make it anti-static and safe for gasoline oil fuel diesel transfer..
  • ♠NYLON TIGHTEN BAND: Gas siphon with a nylon tighten band on brass valve end, you don't worry that the copper head come off from the tube and go into your car oil tank. Before use, please pull the nylon zip tie to keep the brass valve more tightening. Don't pull it out by force..
  • ♠WIDELY USE: Our syphon hose kit efficiently transfers gasoline, diesel, water, oil and urea for car on the go without electricity. Perfect for small household chores, lawn and garden, and outdoor activities. Don't suck gasoline into your mouth any more..
  • ♠ATTENTION: Auto siphon inner diameter 0.56"(1.4cm) and outside diameter 0.72"(1.8cm), brass valve end inner diameter 0.8"(2cm) and outside diameter 0.88"(2.2cm), please measure your container before purcha....
Check Stock

YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter

  • 1 ★【 Connect Multiple Items 】 Used for adding an outlet on existing 3/8 compression angle stop valve to supply water for faucet , dishwasher , glass rinser , bidets et.
  • Suitable for both cold and hot water systems.
  • 2 ★【 Heath and environment friendly material 】Lead free brass , chrome-plated tee valve for both potable and non-potable water . For adding an outlet on a angle stop valve for a bidet , water filtration system, dishwasher, second faucet, etc.Used for adding an outlet , Install on angle stop valve.
  • 3 ★【 Ideal 3/8 water line splitter 】1/4 turn tee stop valve,so you can freely control on-off of the branch waterway and adjust water flow size to suit your needs.
  • 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
  • This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
  • 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
Check Stock

Speakman CPV-TV Plumbing-Equipment, Brass

  • 1/2-14 NPT threaded inlet & two outlet connections.
Check Stock

1/2\ Brass Electric Solenoid Valve,110v Ac Brass Electric Solenoid Valve for Water Air Gas Fuel Oil

  • High quality normally closed electric solenoid valve:Model:2W160-15.
  • Size:1/2 inch,Working temperature range: 23-176°F；Pressure range：0-145Psi.
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket..
  • Applicable use in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.).
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit..
Check Stock

5 Loop Radiant Heat Manifold, 5-zone PEX Tubing Manifolds with Compatible Outlets, for Hydronic Radiant Floor Heating (1/2" 3/4" PEX adapters sold separately)

  • Its nickeled brass material are higher thermal conductivity, faster heating and insertion into plastic pipes than stainless steel ones..
  • 5 loops with 1 extra drain and cap, 1” FPT supply and return, up to 1.6 GPM high flow meter..
  • Compatible to both 1/2″ and 3/4″ pipes outlets. Adapters not included please search AB manifold adapters 1/2 and 3/4..
  • Heavy duty stainless steel mounting bracket.
  • It includes automatic air vent, shut-off valve, drain valves with outlet caps, temperature gauge, flow valve, balancing valve/manual wheel for supply and return trunks..
Check Stock

mistcooling 250 PSI Misting Pump

  • ...s protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turne....
Check Stock

Mudder UHS24 Humidifier Solenoid Valve Universal 24 Volt Solenoid Valve Replace for Honeywell 32001639-002 Skuttle A01-0814-148 Aprilaire 4040 General 990-53 Compatible with HE220 HE225 HE260 HE265

  • What you get: you will receive 1 set of UHS24 universal humidifier solenoid valve, each set contains 5 pieces of brass fittings, such as compression,....
  • Scope of application: our universal 24 volt solenoid valve can be applied for replacing Aprilaire 4040, General 990-53, Honeywell 320016939-002,....
  • Compatible object: this humidifier solenoid valve is compatible with Honeywell humidifiers of HE220, HE225, HE260, HE265, please check whether your....
  • Easy to assemble: just screw in the appropriate fittings on the inlet and outlet, you will complete its installation, it can help to change the....
  • Quality material: this humidifier solenoid valve and accessories are made of quality brass which is durable and stable, has nice corrosion resistance....
Check Stock

KES Shower Shut Off Valve G1/2 Brass with Handle Lever Water Flow Control Valve Flow Regulator Polished Chrome K1140B3-CH-KES

  • G 1/2 Connections: 1 X G 1/2 female inlet, 1 X G 1/2 male outlet, standard straight thread connections, washer included..
  • Brass Body: Brass body construction provides much higher performance (high heat-resistance and pressure-resistance) and durability than plastic ones. Shower head valve can serve many years without leakage..
  • Highly-reliable Cartridge: Advanced leakproof ceramic cartridge can be operated up to 200 000 times switching cycles..
  • Water Flow Controller: Can be used as shut-off valve or water saver valve..
  • Easy to Operate: Lever handle can be operated easily and smoothly even with wet and slippery hands..
Check Stock

QWORK Air Compressor Pressure Switch Control Valve 90-120PSI Pressure Regulator with Pressure Gauges Fittings Set

  • Durable: ABS shell + Iron galvanized connector + Brass control valve, durable and anti-corrosion..
  • Size: Thread: G1/4, Pressure Range: 90-120PSI, Maximum Voltage: 240V, Maximum MAP Current: 20A..
  • Adjustable Air Outlet: The air pressure at the brass joint is adjustable, which prevents the air pressure from being too high or too small so as to....
  • Application: Air compressor pressure switch Control valve is designed to control and adjust air compressor pressure and better for high efficiency....
  • Service: Enjoy a smooth & worry-free return service within a month. Any questions feel free to contact us, we will be here for you..
Check Stock