ReviewsBrass Quick Fittings

Set of Brass Garden Expanding Hose Joint Male Pipe Adaptor Repair with Quick Connector Fitting

  • Heavy-duty brass construction with rust proof. Follow the instructions when repairing water pipes, and they do not fit for thicker outer hose cloth expandable hoses..
  • Pipe joint diameter is 10mm/0.39″. Note: The outer diameter of the hose should not exceed 0.47”(11.8mm). And these pipe fittings are quick connector system, not 3/4″ thread..
  • Make quick, effective repairs to an expandable hoses. Suitable for most quick male end connectors (outer diameter 16mm), secure Fit, no-Leak connection. Not 3/4″ thread..
  • They can be use garden hose mender, end hoses male mender, end hoses female mender..
  • Include: 2 x brass female quick connectors, 1 double male quick connector.
Check Stock

3/8 Air Fittings Push to Connect Fittings,CEKER 3/8 Inch Tubing Od x 3/8\ NPT Thread Male Pneumatic Fittings Air Line Fittings Quick Connect Push in Connectors 5Packs

  • Type:3/8" Od x 3/8" NPT Male Push to Connect Fittings.
  • 3/8 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • 3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi.
  • 3/8" od tube Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
  • Working Temperature: 0-60°C | 32~140°F.
  • Push to connect air fittings 3/8 is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check Stock

CEKER 1/4 Tube Fitting Push Connect Pneumatic Fitting,PC 1/2\ Tube Od x 1/4\ NPT Thread Male Straight Union Air Fittings Push in Fitting Quick Release Pneumatic Connectors 2Pack

  • Type:1/2" Od x 1/4" NPT Male Push to Connect Fittings.
  • 1/4 inch Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • 1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi.
  • 1/2" od tubing Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
  • Working Temperature: 0-60°C | 32~140°F.
  • 1/4 Push to connect air fittings is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check Stock

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Meter 1/4" Fittings Can Tap Quick Coupler Adapter, 42" Long

  • AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly..
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge..
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass R134A self-piercing can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of refrigerant bottle opening. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. There is also a 1/4" male ....
Check Stock

NY Brew Supply Copper wort chiller

  • Quick cooling, connects to your garden hose.
  • Includes 10 feet of Vinyl Drain Line and Brass Connection.
Check Stock

HZFJ 1PCS 1/2

  • ☛use☚Adapter for connecting hose or fittings of different types The garden tap hose connectors is precision engineered to be long lasting and leak free..
  • ☛Reminder☚Requires hose clamp( 1pcs included hose clamp).
  • ☛Texture☚The fittings are solid brass, so are much more hard wearing than plastic systems, and are rust resistant..
  • ☛100% AFTER SALE SEVICE☚We provide a return policy for you to ensure you 100% satisfaction. Would you have any questions to our product, please feel free to contact us and we will give you a quick response..
Check Stock

12 Feet 1/2-Inch Natural Gas Hose with Quick Connect Fitting for BBQ Grill Pizza Oven Patio Heater and More NG Appliance Propane to Natural Gas Conversion Kit - CSA Certified

  • 【Good quality】Material upgrade - The propane hose is made of high-quality rubber, And connected with 100% solid brass connector, Has very good....
  • 【Widely used】Has a very broad applicability, Perfect for Weber, Charbroil Grill, and more NG appliances, The hose kit is used to connect your....
  • 【Easy to Install】Very easy to use and flexible, With quick-disconnect brass fittings on both ends, it is easy to attach and remove this gas hose....
  • 【Greater capacity】12FT 1/2 inch ID Natural Gas Hose - with 1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings, Supplies up to....
  • 【Quality after-sales】1 Year quality guarantee, If you have any questions or needs during the use of our natural gas conversion kit, you can email....
Check Stock

24 Feet 1/2-Inch Natural Gas Hose with Quick Connect Fitting for BBQ Grill Pizza Oven Patio Heater and More NG Appliance Propane to Natural Gas Conversion Kit - CSA Certified

  • 【Good quality】Material upgrade - The propane hose is made of high-quality rubber, And connected with 100% solid brass connector, Has very good....
  • 【Widely used】Has a very broad applicability, Perfect for Weber, Charbroil Grill, and more NG appliances, The hose kit is used to connect your....
  • 【Easy to Install】Very easy to use and flexible, With quick-disconnect brass fittings on both ends, it is easy to attach and remove this gas hose....
  • 【Greater capacity】24FT 1/2 inch ID Natural Gas Hose - with 1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings, Supplies up to....
  • 【Quality after-sales】1 Year quality guarantee, If you have any questions or needs during the use of our natural gas conversion kit, you can email....
Check Stock

Set of Brass Male and Female 3/4 Inch Water Hose Quick Connect Fitting Garden Quick Release Hose Connector

  • Garden hose quick connect fittings are made of solid brass. Heavy-duty brass construction with rust proof, no-leak..
  • Easy Off-And-On adapter connection allows you to connect and disconnect with no effort. Just a few seconds to install it. Quick and easy connections to faucet, hose, and hose end accessories..
  • Standard US 3/4 inch thread, easy to used for garden hoses, watering device pressure washer, faucets, lawn sprinkler, water nozzle..
  • Includes external thread female quick connector, internal thread male adapter..
Check Stock

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Measuring Meter 1/4" Fittings Can Tap Quick Coupler, 42" Long

  • AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly.
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. (NOTE: Use valve core tool to unscrew the valve core thimble a little bit if the hose angled connector would not depress the Schrader valve).
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of piercing type re....
Check Stock

JACO Industrial Quick Connect Air Hose Fittings | Plug & Coupler Kit - 1/4\ NPT (Set of 12)

  • SHOP GRADE - performance tested & built to last from 100% solid brass & steel designed for all-day use working with air compressor tools, hoses, and airline accessories in the garage or shop..
  • HIGH PRECISION - all fittings are built to 1/4 inch NPT industrial specs (Type D) for endless compatibility with your best air compressor tools & accessories (also called Type I/M)..
  • QUICK CONNECTION - couplers feature heavy duty six ball bearing insert opening for quick, airtight, and hassle-free connection to plugs - spend less time connecting your air line tools & more time conquering your jobs..
  • LEAK-PROOF - engineered with precision specs and applicable for home, commercial, and industrial use. All plugs & couplers will work with any size air hose or pneumatic tool that features 1/4 inch end fittings. All kits include a bonus thread seal tape roll..
  • 100% Lifetime Warranty by JACO - never worry about needing the right size air fittings again. Trusted by mechanics & backed for life by our business with over 35 years of experience serving the pneumatic tools industry!.
Check Stock