ReviewsBrass Reducer Tee

Hromee Amp Input Reducer 4 Gauge to 8 Gauge Car Stereo Audio AWG Pin Power Ground Wire Reducer 4 Pack

4 to 8 GAUGE - Reduce amplifier input 4 Gauge wire to a 8 gauge size. And sold in 2 pairs (4 Pieces)..
APPLICATION - Ideal for power or ground cable. Wire reducer can be used for most cars, effectively improve the transmission of sound quality..
DIMENSIONS - Product length: 46mm/1.81in. Screw ring wiring diameter: 12mm/0.47in..
EASY INSTALL - No crimping required, allen screw clamping is already set that ensures tight connection..
HIGH QUALITY - Wire reducer made of brass and nickel plated. It features good conductivity, high hardness, resistant to acid and rust..

[Easy Adjustment] Adjustable water pressure settings, you can easily adjust the required water pressure with a screwdriver to help protect your RV system, water pipes, water tanks and filters..
[Safe Use] The adjustable water pressure reducer is made of lead-free brass, and each regulator has been tested. The lead content is less than 0.13%, which is far below the 0.25% lead-free requirement of NSF..
[Convenient Cleaning] The water pressure regulator adopts a detachable valve core, which is easy to clean and replace. The double inlet filter is designed to filter gravel to prevent clogging by impurities..
[Wide Compatibility] The brass lead-free water pressure reducer is suitable for 3/4" outdoor hose threads and NH threads, compatible with all American water supply systems..
[Powerful Function] Adjustable water pressure regulator with pressure gauge can display the pressure value intuitively. It is an essential accessory for RV, travel trailers and campers. If there is any dissatisfaction with regulator, we will solve your question within 24 hours..

...E, LG, Whirlpool, Frigidaire, etc..In particular the 3/8" x 3/8 "x 3/8" Comp tee stop valve, convenient for you add a branch waterways on the existing water supply and freely control on and off..
【Easy Installation】:The dishwasher water line each end has brass 3/8" compression fittings and built-in high-quality sealing ring,ensure a securely and solid connection.
The tee stop valve and elbows with standard thread,plumber's sealant tape is also included in the kit.
even DIY,your first installation or replacement work can be completed in minutes,and no leakage..
【Safe material】:Our dishwasher hose inner tube made by food grade PEX materials, non-toxic ingredients,odorless and tasteless, have tested to meet NSF/ANSI standards.
the brass tee stop valve and elbows are lead free.Ensure you enjoy the convenience and safety that dishwashers bring to you and your family's lives..
【Prime quality 】:The water line outer layer is wrapped with superior grade 304 stainless steel braided wire,the brass tee stop valve and elbows are single piece brass construction.
So all the parts are extremely safe a....

Work with 50ohm low loss RF cable RG-8,RG-213,LMR-400 & Belden 9913.If your cable is RG-8X Mini-8 RG-59 LMR240 Type,then use UG-176 Reducers to fix the cable.(UG-176 reducer is included in the package).
Ideal for build or repair coaxial cables,use this connector to create your own UHF cable which is widely used in Wireless Communications Systems,Short Antenna Feeder runs or any other application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,SCADA, Mobile Antennas).Top DIY solution.
Silver plated body,pin,and sleeve good for conductivity and easier soldering.Note:the reducer is nickle plated not sivler.
The dielectric is Teflon to handle higher power and withstand high temperature when soldering and will not Melt.
All metal parts are made of brass copper,premium quality connector.

Material: Brass. Connections: 3/8" x 5/16".
Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.

Material: Brass. Connections: 5/16" x 1/4".
Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.

Material: Brass. Connections size: 1/2" x 3/8".
Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.

Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).