ReviewsBrass Regulator

GasOne Head Banjo High Pressure Propane Burner 10 in Heavy Duty

Includes - Burner Head, Orifice, Air Controller & 0-20 PSI adjustable High Pressure Regulator and Hose.
BRASS FITTING ORIFICE BLOCK - Includes Brass Fitting Orifice block & Air shutter and Spring.
HEAT RESISTANT - Cast Iron will not melt easily compared to aluminum construction, Has high heat tolerance.
HIGH HEAT OUTPUT - With 0-20 PSI Regulator it produces up to 200, 000 BTU.

Regulator Nipple Size: approx.7.3 x 1.4 x 0.5cm(2.87 x 0.55 x 0.20inch)(L x OD x ID).
Regulator Nut Size: approx.2.7 x 2.4 x 1.4cm(1.06 x 0.94 x 0.55inch)(L x OD x ID).
Suitable for: Helium Argon Nitrogen Inlet Bottle.
Item included: 1 x Regulator Nut, 1 x Regulator Nipple.

[Safety and Healthy]: Made of Lead Free Brass, our regulator meets NSF lead-free requirements of less than 0.25%.Our water pressure regulator can reduce original water pressure and make it stable to use..
[Compatibility]: Compatible with U.S. 3/4" water sources(ND20) & NH threads, the regulator can compatible with all U.S. water sources..
[Durability]: Built in oil design can damps vibrations of internal parts or sudden pressure changes and to prolong lifespan of gauge..
[Adjustment]: Through screw driver, the water pressure can be adjusted from 0-160psi easily (Maximum tolerable water pressure: 240psi). Just adjust the brass screw (at the top of regulator) to change the pressure - or +. Arrives with our easy installation guide..
[Easy to clean]: The removable valve spool is easy to clean or replace.Double-layer inlet screened filter design will filter the particles like gravel, debris to prevent impurity blocking and valve body damage..

Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
GA-3 tip soft solders up to 1-Inch. GA-8 soft solders up to 2-Inch. Compare with Turbo Torch.
Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for MC acetylene cylinders.

DUAL GAUGE REGULATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed....
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless....
CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a....
STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten....
INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank....

CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
Nitrogen Regulator, Delivery Pressure 0-4000 PSI..
Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.

❤ For camping stove extension hose with 1/4′ quick connect on RV (make sure your current is female 1/4 quick adapter).
❤ Length of hose 12ft inlet side with 1′-20unef male thread to connect your one pound propane regulators（You have to remove the regulator on your RV or trailer if you use like this）.
❤ You can easily take off the 1LB brass adapter and if your grill with 3/8″ Male Flare Ends work as an extension hose only (After remove regulator).
❤ This hose have dual use–if you want to connect it with your 1 pound regulator, Make sure you remove the regulator on RV, if your grill connects a standard QCC or POL regulator with hose 3/8″ female flare nuts, so just take off the regulator hose and the 1LB adapter on our hose then connect your RV.
❤Attention: You cannot use two regulators on your if you connect 1lb regulator on your RV, the regulator on RV should be removed..

MEGR-1122H-AAJ High Pressure 10 PSI First Stage Regulator (1/4" Inlet x 1/2" Outlet) 1,000,000 BTU Capacity.
MEGR-1652-CFF Low Pressure 11" Water Column Backmount 90 Degree Second Stage Regulator (1/2" Inlet x 3/4" Outlet) 1,000,000 BTU Capacity.
POL x 1/4" Pigtail to connect between the propane tank and the first stage high pressure regulator.

Two Bags in one. Mesh Dive Bag and Regulator Case..
When traveling to your destination, the bag is converted to solely a Regulator Bag and takes minimal room in your travel roller..
When you arrive to your destination, open one zipper and convert your regulator bag into a full size Mesh Duffel Dive Bag..
The Laguna Collapsing Duffel Bag is made by AKONA, an American Sporting Goods Brand, specializing in Watersports since 1992..

EASY TO INSTALL, EASY TO USE. Effortlessly adjust and monitor your water pressure, and enjoy strong showers and good water flow, while having the peace of mind knowing your RV is protected from high water pressure. This brass RV water pressure regulator also comes with a 1-year warranty and local phone and email support. Installation is as easy as attaching a water hose (each product comes with an illustrated guide)..
1-YEAR WARRANTY AND U.S.-BASED PHONE AND EMAIL SUPPORT. Renator is one of the only companies based in the U.S..
we do both secondary quality control in our Florida warehouse, and offer lifetime local phone and email support because we stand behind our product. The regulator is made out of heavy duty, rust-free brass, the gauge is made of stainless steel and contains silicone oil to reduce friction of internal components and significantly increases the life of the product..
LEAD-FREE. This regulator was modified to contain lowest amount of lead of any regulator on the market. Each batch of regulators is tested to contain less than .13% lead, well under the NSF lead-free requirements of .25%. Email us for a copy of our testing certification. The regulator's inlet screen also helps to filter out debris and other impurities..

CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
Nitrogen Regulator, Delivery Pressure 0-400 PSI.
Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.