ReviewsBrass Rods For Welding Projects

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....

Check Stock

Argon CO2 Regulator Gauge Welding Gas Regulator with 6.6Ft Gas Hose CGA580 Inlet Connection 0-4500PSI/0-10BAR Input Pressure

【CGA-580 Connection】The Argon regulator with CGA-580 Inlet Connection fits standard Argon, CO2 Gas Tanks from any supplier. The gas regulator is a standard pressure control valve that reduces the input pressure from gas stored in a tank.
【Accurate Pressure Gauge】Input pressure: 0-4500PSI. The Argon CO2 Regulator has two Easy to read pressure gauge, the argon flow meter provides accurate measurement of gas. And it has Internal safety pressure relief design to protect you form danger..
【Brass Material】Our welding gas regulator is made of solid brass, so the surface can keep a good looking for a long time. Precision thread design ensures high sealing performance and avoids gas leakage..
【General Feature】A 6.6Ft gas hose ensures your tanks at a safe distance from your Mig Tig welding projects, 5/8'' Female and 9/16" male outlet connection. And the filter structure at the CGA-580 connection effectively prevent debris in the argon tank entering the gauge with the airflow..
【Application】Our welding regulator is pefect for MIG and TIG welding. It is an economic alternative for you to get more precise gas metering, like the accurate reading of argon regulator would help you to adjust pressure before welding..

Check Stock

100PCS Aluminum Welding Rods Low Temp Easy Melt Aluminum Welding Wire Flux Core-Only Wuitable for Welding Aluminium (0.16 x 33cm/0.06 x 13in)

【NO SOLDER POWDER NEEDED】The aluminum welding rods are flux cored welding rods,so there is no need to use other flux powder..
【HIGH QUALITY MATERIAL】The aluminum welding rods with flux are made of aluminum material, nontoxic, odorless and durable material..
【PERFECT WELDING EFFECT】The aluminum welding wire for propane torch are designed with full & smooth welding effect because the item comes with internal powder, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity and excellent processing performance..
【NOTES】The solution welding flux-core rods are only suitable for argon arc welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good for geability & good corrosion resistance..
【WARRANTY 】If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..

Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....

Check Stock

FOXBC 93-Inch X 3/4-Inch X 10/14 TPI Bandsaw Blades for Metal Cutting

93-Inch x 3/4" X 0.035 X 10/14 TPI Band saw Blades for Metal Cutting.
Fits all band saws requiring a 93" long 3/4" wide blade.
Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring a 93" long 3/4" wide blade.
Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
Unique welding technique :strong and smoother welding point.

Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
Copper (Cu): Rest. For the best results..
Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
Service: Fox Alloy Time-proven formulation.
A team of experienced welding engineers ready to answer all your welding questions.

Check Stock

FOXBC 80\ X 1/2\ X 24 TPI Bi-Metal Bandsaw Blade for Metal Cutting

80-inch X 1/2-inch X 0.025 Band saw Blades for Metal Cutting.
Suits all bandsaws which uses 80" long, 1/2" wide bandsaw blade.
Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring a 80" long, 1/2" wide bandsaw blade.
Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
Unique welding technique :strong and smoother welding point.

Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/4" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Check Stock

FOXBC 64-1/2 Inch Bandsaw Blades, 64-1/2-Inch X 1/2\ X 14/18 TPI for Metal Cutting

64-1/2-Inch x 1/2" X 0.025 X 14/18 TPI Band Saw Blades for Metal Cutting.
Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring a 64-1/2" long 1/2" wide blade.
Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
Fits all band saws requiring a 64-1/2" long 1/2" wide blade.
Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
Unique welding technique :strong and smoother welding point.

Check Stock