ReviewsBrass Steel Ball Valve

SR SUN RISE 10 Inch Shower System Handheld Showerhead & Rain Shower Combo for Easy Reach 1.8 GPM Shower Faucets Sets Complete Shower Fixtures with Valve and Trim kit, Brushed Nickel

  • ...essure balance valve's cartridge monitor water pressure balance, helping to protect you from being scalded by sudden changes in hot or cold water pressure..
  • Pop-Up Water Diverter: Located on the bottom of the surface mounted, easy-access diverter location. Press to switch between handheld and rain shower. Robust all-brass body ensures long life..
  • Durable Material: The shower head with handheld is constructed from brushed nickel plated ABS material which is non-toxic, durable and lightweight. The adjustable swivel ball joint and stainless steel hose give you a larger shower area..
  • You Will Get: 10 Inch Rain Shower Head(ABS with Brass Ball Joint), 7 Settings Hand Shower(ABS), Rough-in Valve and Trims(Solid Brass), Pop-up Diverter (Solid Brass), Adjustable Slide Bar and Shower Holder (304 SUS, ABS), Shower Arm and Surface Mounted (304 SUS), 71 Inch Shower Hose(304 SUS) and Accessories Required for Installation..
Check Stock

QWORK Stainless Steel Floating Ball Float Valves 1/2 inch DN15 Adjustable Male Thread Water Float Sensor Hydraulics, Pneumatics & Plumbingall

  • Float valves use a rod and float ball attached to a valve shutoff lever to control.
  • Floating Ball Material: 304 Stainless Steel.
  • Designed with G1/2 inch thread that is normally used, can fit many pipe connection.
  • This float valve has a high-temperature rubber seal, durable to aging for long time use for better sealing and makes sure no leaking.
  • Widely used in magnetic level switch and liquid level measurements.
Check Stock

POP SANITARYWARE Shower Only Faucet Set Brushed Nickel, Bathroom Rain Mixer Shower Head Set Wall Mounted Rainfall Shower System Single Handle Shower Trim Kit with Rough-in Valve

  • LUXURY DESIGN: Swivel ball allows you to adjust the angle of the showerhead to suit your preference..
  • ALL METAL MATERIAL: Solid brass rough-in shower valve body, Stainless Steel shower head and brass ceiling mounted shower arm..
  • cUPC CERTIFIED: ASME A112.18.1-2018/CSA B125.1-18 with 1/2" NPT thread on both shower arm and valve body..
  • INCLUDES: 8" Stainless Steel shower head, shower arm, shower mixer valve. California CEC list (1.8GPM 6.8L/MIN). CUPC certification, Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18.
  • LIFETIME LIMITED WARRANTY: Any product quality problem can be guaranteed within 5 years. The shower cartridge is permanently replaced free of charge..
  • IMPORTANT WARNING: Not compatible with other brand‘s shower faucet valve and cartridge. The old shower valve must be removed if install this kit..
Check Stock

SR SUN RISE Shower System with 3-spray Rain Shower and 6-Setting Handheld Combo 1.8 GPM Shower Faucets Sets Complete with Adjustable 27.6\ Slide Bar Shower Fixtures Valve Include, Matte Black

  • ...essure balance valve's cartridge monitor water pressure balance, helping to protect you from being scalded by sudden changes in hot or cold water pressure..
  • Pop-Up Water Diverter: Located on the bottom of the surface mounted, easy-access diverter location. Press to switch between handheld and rain shower. Robust all-brass body ensures long life..
  • Durable Material: The shower head with handheld is constructed from brushed nickel plated ABS material which is non-toxic, durable and lightweight. The adjustable swivel ball joint and stainless steel hose give you a larger shower area..
  • You Will Get: 10 Inch Rain Shower Head(ABS with Brass Ball Joint), 7 Settings Hand Shower(ABS), Rough-in Valve and Trims(Solid Brass), Pop-up Diverter (Solid Brass), Adjustable Slide Bar and Shower Holder (304 SUS, ABS), Shower Arm and Surface Mounted (304 SUS), 71 Inch Shower Hose(304 SUS) and Accessories Required for Installation..
Check Stock

3/4\ NPT 2PCS Lead Free Full Port Forged Brass Ball Valve, Full Port Heavy Duty Brass Ball Valve Shut Off Switch for Water and Oil

  • Made from high quality H90 brass, this brass ball valve is robust and durable. In this respect, it is the ideal plug valve for high quality shut-off valves in the chemical and food industry or in the home or garden. The sides of the dispenser have female threads in accordance with ISO 7-1 (EN 10226-1) M-M..
  • The internal passage of the drain tap is straight for optimum and complete passage and therefore has a low flow resistance. The permissible operating temperature is -25°C + 180°C and the maximum working pressure is 40 bar.
  • The lever handle mounted on the top is used to close and open the ball valve, easy to use, pressure free or no pressure. The spherical seal is made of PTFE for maximum stability and durability even at very high temperatures..
  • Ball valves are widely used in mechanical equipment, industrial equipment, water supply and drainage equipment, for example in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc..
  • This high pressure ball valve can be used as a rotary valve for steam, saturated steam, hot water, or as a plug valve for heating. The ball valve is suitable for pressures up to PN 40. The spindle is fixed in the relief area and the valve has an ant....
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

Guardian GBF1909 Stainless Steel Barrier Free Safety Station with Wide Area Eye/Face Wash and Plastic Shower Head

  • Barrier-free combination Wide Area eye/face wash and shower safety station.
  • Shower Head: 10" diameter orange ABS plastic.
  • Shower Valve: 1" IPS chrome plated brass stay-open ball valve with stainless steel actuating arm and 47 1/2" stainless steel pull rod.
  • Eye/Face Wash Bowl: 11-1/2" stainless steel.
Check Stock

Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System

  • ★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
  • ★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
  • ★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
  • ★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
  • ★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
  • easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..
Check Stock

RinseWorks- All Brass Aquaus 360 Handheld Bidet Sprayer for Toilet - NSF Plumbing Code Certified for Legal Installation - Ergonomic Dual Thumb Pressure Controls- 3”-11” Spray Reach - 5 Year Warranty

  • PLEASE WATCH THE AQUAUS 360 VIDEOS in the product pictures to learn why the Aquaus 360 is the best option compared to other types of Bidets..
  • INCLUDES - Patented BRASS Sprayer – Brass T-Connector & Ball Valve – 54-inch Stainless Steel Hose - 2 BRASS Spray Heads - 5’’ Extension - Tank Clip & Sprayer holder.
  • MADE IN THE USA with domestic and global components. NSF Certified to UPC (Uniform Plumbing Code) for legal installation in the USA and Canada.
  • includes 2 CSA/NSF certified plumbing code required backflow preventers..
  • NSF CERTIFIED Stay Flex stainless steel 54-in long high-pressure hose with solid brass hose nuts and double crimps on both ends.
  • stays totally flexible during use. NSF Certified brass EZ-Reach shut-off valve and T-Connector with hand tight 7/8-in handgrip nut.
  • easily attaches to toilet without tools or a plumber.
  • includes all parts for easy installation.
  • WORLD'S FIRST AND ONLY Hand Held Bidet with Dual Thumb Pressure Controls on both sides of the Sprayer for Super EZ Pressure Control..
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • ... tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
  • 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential t....
Check Stock

RinseWorks - Aquaus 360 Patented Hand Held Bidet Sprayer - NSF cUPC Certified for Legal Installation - 2 Backflows – Dual Pressure Controls - StayFlex Hose - 3 to 11 Inch Spray reach - 3 Year Warranty

  • PLEASE WATCH THE AQUAUS 360 VIDEO in the product pictures to learn why the Aquaus 360 is the best option compared to other types of Bidets..
  • INCLUDES - Patented ABS Polymer Sprayer – Brass T-Connector & Ball Valve – 54-inch Stainless Steel Hose - 2 ABS Spray Heads - 5’’ Extension -....
  • MADE IN THE USA with domestic and global components. NSF Certified to UPC (Uniform Plumbing Code) for legal installation in the USA and Canada.
  • NSF CERTIFIED Stay Flex stainless steel 54-in long high-pressure hose with solid brass hose nuts and double crimps on both ends.
  • HIGH QUALITY Spray Wand made of high strength, impact resistant, corrosion free ABS polymers and Brass Valve Core with Ceramic Disk Seals. 3 year....
Check Stock