ReviewsBrass Stop Valves

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

EZANDA Brass Single Handle Bathroom Sink Faucet, Lavatory Vanity Faucet with Escutcheon, Pop Up Drain Stopper & Water Supply Lines, Brushed Nickel, 14166

  • Made by lead- free BRASS Ensuring for product quality and safety of drinking water.
  • Matching finish sink drain stopper Included. With Press & Seal pop-up mechanism, 3 Components only for easy installation and operation.
  • Comes with Hot & Cold-Water Hoses for stop valves connecting. (Length: 23.6 inch /600mm, Thread: 9/16-24 UNEF standard).
  • Designed to fit 1 or 3-hole configurations. Deck plate included for 3-hole 4" installation.
  • Premium ceramic disc cartridge for smooth, long lasting and drip-free performance.
Check Stock

Rheem RTG20220AB Webstone Tankless Water Heater Service Valve Kit, Clean Brass

  • These hot and cold water service valves simplify installation and service by combining multiple valves and connections in a single part.
  • Clean brass for California low lead codes.
  • Fits all models of Rheem gas tankless water heaters.
Check Stock

TRUSTMI Brushed Gold Bathroom Faucet Modern Lavatory Vanity Sink Faucet, Single Handle Single Hole Deck Mounted, Brass

  • Brushed Gold Finished, Make your Bathroom Look Warmer. Solid Brass Construction, Ensuring Quality and Longevity.
  • Bathroom Vessel Sink Hot and Cold Mixing Faucet, Quality Ceramic Disc Cartridge assume Drip-Free and Durable Performance.
  • Spout Reaches 4-7/8 inch, Spout Height 2-3/4 inch, Overall 7-13/64 inch, Mounting Hole Diameter: 1-17/64" ~ 1-27/64" /(32~36mm).
  • Single Hole, Single Handle, Hot and Cold Mixing Valve, Comes with cUPC Hot & Cold Water Supply Lines (Lenght: 23.6 inch /600mm, Compression: Female US 3/8-inch) for stop valves connecting.
  • Water Pressure 14.5 - 145 psi , 70psi Recommended for Best Performance. If you would like the same faucet with pop up drain and deck plate, pls search B07MPBZP61..
Check Stock

SharkBite 1/2 Inch Check Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE U2008-0000LFA

  • SHARKBITE BRASS CHECK VALVE: This push-to-connect brass check valve allows you to prevent the reverse flow of water quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit spring-loaded check valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass check valves allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed horizontally or vertically.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this check valve can withstand 200 degrees F and 150 PSI.
Check Stock

Kohler K-GP77759 Mixer Cap for Pressure Balance 1/2' Shower Valve, Black

  • Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo.
  • Compatible with most Rite-Temp shower valves.
  • Temperature limit stop provides temperature control for safety while allowing maximum water temperature.
  • Temperature limit stop which allows maximum water temperature and offers additional scalding protection.
Check Stock

KUNTEC Victor Style Cutting Torch CA1350 & 100FC Acetylene Oxygen Welding Cutting Torch Set

  • 90 degree head For use with multiple gas types: Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
  • Brass coupling nut & double o-ring tapered seal gives quick gas-tight seal without a tightening wrench..
  • Connection: B fitting (9/16" - 18), 1pc 3#101 cutting nozzle,built in reverse flow check valves no need for accessory check valves.
  • Constructed with high strength alloy, heavy duty stainless steel and durable brass.
  • Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip.
Check Stock

Cool Wind CTU-200 Series 4-Valve BBb Tuba Orange

  • Tuning: Bb Bore: 0.826" (21 mm) Mouth piece material: ABS Valves: 4-valves Bell material: ABS Valve material: Metal Valve: Rotary valves Case : Soft Gigbag.
  • Plastic “brass” instruments have been in the marketplace for a few years now.
  • First came the trombones, then the trumpets.
  • Now manufacturers are taking what they’ve learned and applying it to more ambitious designs such as the plastic tuba.
  • Cool Winds is at the forefront of this design and manufacturing revolution.
Check Stock

Cool Wind CTU-200 Series 4-Valve BBb Tuba Blue

  • Tuning: Bb Bore: 0.826" (21 mm) Mouth piece material: ABS Valves: 4-valves Bell material: ABS Valve material: Metal Valve: Rotary valves Case : Soft Gigbag.
  • Plastic “brass” instruments have been in the marketplace for a few years now.
  • First came the trombones, then the trumpets.
  • Now manufacturers are taking what they’ve learned and applying it to more ambitious designs such as the plastic tuba.
  • Cool Winds is at the forefront of this design and manufacturing revolution.
Check Stock

Cool Wind CTU-200 Series 4-Valve BBb Tuba Black

  • Tuning: Bb Bore: 0.826" (21 mm) Mouth piece material: ABS Valves: 4-valves Bell material: ABS Valve material: Metal Valve: Rotary valves Case : Soft Gigbag.
  • Plastic “brass” instruments have been in the marketplace for a few years now.
  • First came the trombones, then the trumpets.
  • Now manufacturers are taking what they’ve learned and applying it to more ambitious designs such as the plastic tuba.
  • Cool Winds is at the forefront of this design and manufacturing revolution.
Check Stock

Cool Wind CTU-200 Series 4-Valve BBb Tuba Red

  • Tuning: Bb Bore: 0.826" (21 mm) Mouth piece material: ABS Valves: 4-valves Bell material: ABS Valve material: Metal Valve: Rotary valves Case : Soft Gigbag.
  • Plastic “brass” instruments have been in the marketplace for a few years now.
  • First came the trombones, then the trumpets.
  • Now manufacturers are taking what they’ve learned and applying it to more ambitious designs such as the plastic tuba.
  • Cool Winds is at the forefront of this design and manufacturing revolution.
Check Stock