ReviewsBrass Swivel Fitting

Roastove Propane Elbow Adapter with Extension Hose 12 FT RV 1/4 Quick Connect Propane Hose with Elbow Fitting to Blackstone 17 /22 Griddle…

【COMPATABILITY】Suit for connecting Blackstone 17"/22" Griddle directly to RV's propane supply, convert.Also can take off the elbow adapter and....
【STANDARD FITTING】1/4" male quick-disconnect plug x (Propane elbow adapter fitting for Blackstone 17"/22" Griddle + 3/8" female flare swivel....
【COST EFFECTIVE】You do not need a regulator any more ,allows your Blackstone Griddle to connect to the low pressure system on a travel trailer or....
【DURABLE】Solid brass construction ,12 feet durable rubber hose..
【EASY TO INSTALL】Connect directly by hands no need tools..

Check Stock

M MINGLE Garden Hose Adapter, Female to Female, 3/4 Inch Heavy Duty Brass Connect Fittings with Dual Swivel, Pressure Washer to Garden Hose Connector, 2-Pack with Extra 4 Washers and 1 Filter

Female to Female Hose Adapter: 2 pack 3/4″ double female swivel brass connector with 4 extra garden hose washers and 1 filter, each garden hose coupler double female contain 1 rubber washers and 1 filter..
No Leak Female Hose Coupling: Double female kit was made with precision process, garden hose swivel with rubber washers inside to prevent leakage, easy connect and disconnect. Filter helps keep debris out of power washer pump..
Standard 3/4″ Female Hose Fitting: 3/4″ GHT female thread on both ends. Used for garden hose or other watering devices. Fit most brands of pressure washers. Black filter is the garden hose side and the red washer is the pressure washer inlet side..
Material: Double female hose adapters are made of solid brass for maximum durability and strength..
M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..

Check Stock

Brass Barb T Fittings LIONMAX 3 Way Union Barb Tee Fitting 3/16 x 3/16 x 3/16 ID Hose Barb 3 PCS for Water/Fuel/Air

【SOLID BRASS MATERIAL】3/16'' × 3/16'' × 3/16'' ID Hose barb tee fitting is made of brass. Strong and durable, not easy to rust and corrode. NOTE: Brass barb tee fitting is not suitable for potable water..
【-65~250°F 150PSI】Brass barb 3 way union fitting has strong temperature resistance and good pressure resistance. So barb T fitting is often used for water, fuel, oil delivery..
【SPECIFICATION】3/16'' ID Hose barb tee fitting is suitable for 3/16 inch ID hose. The package contains brass barb tee 3 PCS..
【WIDE APPLICATION】Barb tee is suitable for pipe repair. Various hoses can be connected to this 3/16 inch ID hose barb tee fitting. Meet your multiple needs..
【TIGHT CONNECTION】This hose barbed T fitting is smooth overall without burrs. Size meets the standard. The strong barb make the 3 way union fitting not easy to leak during the connection process..

Check Stock

Propane Torch Weed Burner Torch - Weed Torch with Push Button Igniter and 6.5 ft Hose, High Output Outdoor Torch Kit for Garden Stumps Wood Ice Snow Roofing

SOFT-HOSE P.O.L SAFETY VALVE DESIGN - Fitted with a 7/8"-14 TPI, left hand male propane bottle connection with a steel tip diameter of 2 3/8”, the screw is 1/4 18 NPT P.O.L..
The operation to remove the hose: Reverse thread POL safety valve (loose by turning right, tight by turning left). Soft hose P.O.L valve fitting connect to any standard propane tank with an OPD valve. Brass valve construction and valve spool designed for use with standard size propane tanks.Size for fitting of the Propane Tank: 7/8-14LH (tank not included)..
Latest 360 Degree Swivel Flame Mechanism. Maximum Flame length is 28 inch. Flame Back flow Prevention..
Satisfactory Service: We provides THREE-YEAR FACTORY WARRANTY and a return/replace policy against defects in material and workmanship..
Multifunctional Use: Burn wand and stumps, melt snow, sear meat or fish, light fires, solder, do wood grain burning, soften asphalt, remove paint from non-flammable surfaces..

Check Stock

iSpring GA1-BN Heavy Duty Non-Air Gap Drinking Faucet for Water Filtration, Reverse Osmosis Systems-Brushed Nickel-Contemporary Style High-Spout

European designer lead-free solid brass faucet. 360 degree free swivel.
Non “air gap” drinking water faucet. NOT a regular hot and cold water kitchen sink or bar sink faucet.
Ideal upgrade for undercounter water filters and reverse osmosis systems.
Brushed Nickel finish. May come with Quick Fitting or Jaco Fitting.
The front washer is pre-installed underneath the metal plate.
Backed by 3-year Manufacturer Warranty with lifetime support line 678-261-7611 from Alpharetta, GA USA.

Check Stock

MISSMIN Water line adapter IPS 1/2 eblow male to female coupling for clawfoot tub shower faucet mount connector

1/2 IPS elbow pipe fitting for clawfoot faucet connecting to water line.
1/2 IPS female ends with swivel collar, attach to water inlets (1/2 inch MIP)of claw foot tub mount bathtub faucet.
1/2 IPS male ends attach water supply lines.
coming with rubber washers to prevent from leaking.

Check Stock

Camco 39857 RhinoFLEX Clear 90 Degree Sewer Hose Swivel Fitting

Clear fitting to see if holding tank is empty.
Swivel lug and bayonet fitting for secure connection.
Connect sewer hose to your RV’s waste valve fitting.

Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....

Check Stock

PWACCS Pressure Washer Swivel, M22 14mm Swivel Joint, Stainless Steel, 5000 PSI

UNIVERSAL CONNECTORS: Pressure washer swivel convert metric M22 14mm male to M22 female thread fitting. Easy to connect and release. Pressure washer swivel joint can connect gun and hose, hose and hose easily. Pressure washer fittings fit most brand of pressure washer hoses and guns..
360 degree rotation freely, pressure washer swivel fitting helps keep the pressure washer hose from tangling and getting kinked when Spraying. The kinks unfolding as you move around. It will solve hand fatigue due to the pressure built up between hose and gun..
Pressure washer gun swivel is made of high quality stainless steel, durable, wear resistantand, resistance to corrosion, long service life..
Pressure washer hose swivel’s Max Working Pressure: 4500 PSI. Max Flow Rate: 30.0 GPM. Max Working Temperature: up to 120℃, 250°F..
If the Kink free gun to hose fitting have any questions, please contact us at first time. We provide a service of quick reply within 24 hours..

Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..

Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

6AN female swivel to 3/8 barb fitting 45 Degree.
Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..

Check Stock