ReviewsBrass Tee Fitting

Westbrass 593144-62 Black 1-1/2 Tubular Tip Toe Bath Waste Drain Kit Matte Black ,Pack of 1

1-1/2 in. x 14 in. Black polypropylene tubes with slip joint washer seal for leak-free fitting.
ADA approved tip-toe bath tub drain plug. Press once to close and again to open.
Two-hole faceplate with two (2) 1/4 in.-20 x 1-1/2 in. plated brass color matching screws.

Check Stock

(30) 1/2\ Brass PEX Fittings 10 Each Elbow TEE Coupler Reducer Lead Free Crimp Cinch PEX GUY

Manufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tube. COMPATIBLE with ONLY Crimp or Cinch Type rings and/or connectors. NOT Compatible with: -Expander Fitting System, Uponor/Wirsbo Expander System.
Lead free brass. Great for any potable water and radiant heating application..

Check Stock

HYLDG 3-Way Female Brake Line Tee for 3/16\ Tube for Inverted Flare Fittings (All 3/8\-24 Threads) (Pack of 3)

3/8-24 Threads (standard 3/16" tube fitting size).
Forged tee with three openings for connecting and branching three pipes with different ends..
Made from brass for higher corrosion resistance than steel..
Pack of 3, you can use them for your Farm vehicle repair, old vehicle repair, and so on..

Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....

Check Stock

Hardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee

【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ，Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..

Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..

Check Stock

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..

Check Stock

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.

Check Stock

Yeleah Feed Water Adapter Angle Stop Adapter Valve Cold Water Supply Valve Compression 1/4 X3/8 X3/8 for Reverse Osmosis Refrigerator Ice Maker Coffee Brewers

1/4"X3/8"X 3/8" Angle Stop Water Valve Adapter ,Brass Feed Water Adapter Compression Valve,Made Of One Piece Design Lead Free Brass And A....
1/4"X3/8"X 3/8" Compression Valve Female Male t Valve Tee Valve Mixing Valve Adapter With Seals,Sink RO Water Line Splitter,Frigerator Ice Maker....
Water valve tap ,Reverse Osmosis Water Faucet Adapter Splitter,Water Line Adapter Splitter Valve 1/4" Compression Fittings Can Be Connected 1/4" Pex....
1/4 Fridge Ice Maker Water Line Splitter ,Under Sink Water Valve Adapter Can onto the normal 3/8 Compression Fitting that most everyone has at the end....
1/4 Angle Stop Valve Adapter Fits Most American Home Kitchen Sink 3/8"Angle Stop Valve ,Water Diverter Valve Stop Valve, Copper Line Refrigerator Ice....

Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..

Check Stock

GASHER 6PCS 1/4 Inch NPT Brass Pipe Fitting Ball Valve Barstock Tee Brass Pipe Fitting and Air Hose Fitings

【DURABLE】: Not a cast product, more robust and durable than castings. Max. pressure 150 PSI..
【MATERIAL】 Durable solid brass construction is resistant to corrosion and long-lasting..
【THREADS】 Male and Female National Pipe Taper (NPT) threads for connecting two pipes.
【TEMPERATURE RANGE】 Operating temperature range of -65 to +250 degrees F..

Check Stock