ReviewsBrass Threaded Bushing 2

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

  • Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
  • Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
  • There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

Quentacy 5-Pack Rotary Canopy Switch ON/OFF 1.5A 250V / 3A 125V Metal Threaded Base Round Wired Light Swithes for Applications, Lamp, DIY Projects 3/8\ hole

  • 5-pack Rotary On-Off Switch with 6inch wire.
  • Black Finish, with threaded metal Bushing with 6 Inch Wire Leads Stripped Ends..
  • Perfect for household appliances, fixtures , lamps and so on.
Check Stock

Shooter's Choice 9mm Pistol Cleaning Kit

  • Solid brass rod section with female 8/32 threaded end and swivel handle for easy cleaning.
  • Brass component adaptor, 20 count 2. 5”x2. 5” cleaning patches, Nylon All-Purpose cleaning brush, 9mm brass pierce point jag, 0. 5 fl. oz. bottle of Shooter’s Choice FP-10 Elite lubricant.
Check Stock

AUTOTOOLHOME Self Centering Doweling Jig Plus 6 inch Widen Wood Dowel Jig Extended Step Drill Guide Bushings Set Woodworking Joints Tools

  • AUTOTOOLHOME self centering doweling jig Extended can be used to make accurate butt joints,miter joints and edge joints as well as acting as a mortising guide..
  • Self Centering Dowel Jig PLUS can be used for more wider material, on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling guide and wood board joints, it is an ideal tool for panel furniture..
  • Made from aircraft grade aluminum,more stable, corrosion resistance.Accurate positioning: fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling,so that the positioning is more accurate, no offset or gaps are left.
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • There are 4 drill guide holes, along the top of the jig,2 holes accept 7/16" and 1/2" drill bits directly.the other 2 holes accept threaded replaceable steel bushings.Package induldes 1/4" drilling bushing x 2.
Check Stock

SALECOM 3X DPDT 6 Pin 3 Position ON/ON/ON Guitar Mini Toggle Switch Car/Boat Switches

  • Mini Toggle Switch threaded bushing height: 5/16".
  • Mini Toggle Switch 3 Position ON/ON/ON (3A 250VAC/5A 125VAC).
  •  Comes with 2 nuts, a flat and a lockwasher.
  • These are good quality toggle switches, not cheap and inferior toggle switches.
  • Please be sure to verifgy the dimensions carefully before you order the item.
  • Please contact us when you have problem with the item before leaving feedback, we will try our best to serve you as soon as we receive your message.
Check Stock

6 INCH Aluminum Bullet Hinge, Weld ON

  • ✔️- 6" Weld-On Aluminum Bullet Hinge..
  • ✔️- No Zerk Fitting (Grease Fitting).
Check Stock

Brushed Nickel Tub Drain Lift &Turn Tub Trim Set with Two-Hole Overflow Faceplate Conversion Kit Assembly Hidrop Bathtub Drain Replacement Trim Kit and Universal Fine/Coarse Thread

  • DRUABLE QUALITY : This brushed nickel tub drain and overflow kit is made of solid brass,stainless steel material ,this tub drain kit provides strength and durable quality for long time use.
  • UNIVERSAL FIT: This brushed tub drain trim kit with thread adapter fits 1-3/8 inchs or 1-1/2 inches tub drain waste as optional.
  • EASY to USE: This bathtub drain kit is easy to lift it up by hand , then lotate it clockwise or counterclockwise to hold it on to drain ,then lotate it to close the tub drain again..
  • EASY to INSTALL: This tub drain with 1-3/8 in. NPSM thread is suitable for bathtub drain system and 1-1/2 in. NPSM threaded adapter optional , you could install the Bathtub Drain Stopper easily and quickly..
  • WHAT YOU GET : brushed tub drain, thread adapter bushing(1-1/2 in. NPSM x 1-3/8 in. NPSM ) ,washer,2-hole overflow faceplate, Two pieces 1/4 in.-20 UNC faceplate screws..
Check Stock

BOOSTEADY Gun Cleaning Kit Universal Gun Cleaning Kit Shotgun Pistol Rifle Cleaning Kit with Lightweight Organized Carrying Case Gun Cleaning Supplies Gun Cleaner Bottle Brass Jags and Tips

  • ...s one complete kit. The interior of the case is well laid out and includes 2 spaces to put your cleaning oil and solvent.
  • One fits all: 3 rods for 22-270 caliber rifles (total combined length 31.4 inch), 3 rods for .30 caliber and up rifles, shotguns and pistols. 13 Pieces threaded bronze bore brushes all calibers: .17 .22 .243 .270 .30/7.62MM .338 .357/9MM .40 .45 .50 .410 12GA 20GA.
  • Quality solid brass: The gun cleaning rods, gun cleaning jags, patch loops and adapters are all made of brass. No cheap plastic. They won't break in your barrel. You will be surprised by the durability of them.
  • Package details: 13 threaded bronze bore brushes, 1 rifle chamber brush, 9 threaded cotton mops, 11 brass gun jags, 4 brass patch holders, 2 empty bottles, 6 solid brass rods (2 with handles), 3 nylon coated flex cables, 100 cleaning patches, 2 metal gun cleaning picks, 2 brass adapter, 3 plastic muzzle guards, 2 double-ends brushes.
  • Best cleaning assistant: The case helps organize the various cleaning accessories. This kit is portable and lightweight. We have stored some consumable spare parts....
Check Stock

AUTOTOOLHOME Gold Self Centering Doweling Jig Kit 2 inch 6PC Drill Guide Bushings Set Adjustable Width Wood Dowel Jig Woodworking Joints Tools

  • ... clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • There are 4 drill guide holes, along the top of the jig,2 holes accept 7/16" and 1/2" drill bits directly.the other 2 holes accept threaded replaceable steel bushings.Package induldes 1/4" drilling bushing x 2.
Check Stock

Continuous Sweep Mini Quartz Movement - Medium Shaft

  • Clock Movement Measurements: Total hand shaft length is 20.6 mm (13/16 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 7.9 mm (5/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 9.5 mm (3/8 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 9.5 mm (3/8 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..
Check Stock