ReviewsBrass Vane Pump

FavorCOOL Vacuum Pump and Manifold Gauge Set,3.6 CFM 1/4 HP Single Stage Rotary Vane Vacuum Pump, HVAC Air Conditioner Refrigerant for R134a R410a R22 Systems, Vacuum Pump Automotive

【Rotary Vane Vacuum Pump】FavorCOOL single-stage 3.6CFM rotary vane vacuum pump is powered by a 1/4 HP all copper motor to keep your HVAC servicing fast and easy. Its 3.6 cfm flow rate can draw your system down as low as 37.5 microns (5 Pa). Intake Ports: 1/4″Flare. Voltage/Frequency: 110/60HZ. Oil Capacity: 300 ml..
【SAFE & DURABLE】The lightweight cast aluminum structure effectively dissipates the heat generated during operation and resists chemical corrosion to ensure years of beneficial use.
Its innovative design also prevents oil backflow and separates the exhaust from any oil vapors, limiting contamination and providing safer operation..
【HVAC GAUGE READING】The HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R22, R134a and R410a, our charging hoses are made by 100% Virgin Teflon Diaphragms with highest industry standards, fits the high pressure requirements for charging R410A, Working Pressure 800psi, Brust Pressure 4000psi. Much higher and safer than most other products on markets..
【Convenient To Operate】FavorCOOL vacuum pump features a simple oil fill port for a clean pour, and the oil window provides you with vital information like oil level and oil quality.

Check Stock

Robinair (15600) CoolTech Vacuum Pump - 2-Stage, 6 CFM

Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
Powerful 1/2 HP, 115V/60Hz thermally protected motor, 6 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
durable molded polycarbonate base improves pump balance and minimizes vibration.
Iso-Valve isolates pump from system with just a quarter turn.
Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
1/4, 3/8, and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.

Check Stock

Robinair (15400) CoolTech Vacuum Pump - 2-Stage, 4 CFM

Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
Powerful 1/2 HP, 115V/60Hz thermally protected motor, 4 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
durable molded polycarbonate base improves pump balance and minimizes vibration.
Iso-Valve isolates pump from system with just a quarter turn.
Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
1/4 inch and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.

Check Stock

Robinair (15120A) CoolTech Vacuum Pump - 2-Stage, 10 CFM

Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
Powerful 1/2 HP, 115V - 60Hz thermally protected motor, 10 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
durable molded polycarbonate base improves pump balance and minimizes vibration.
Iso-Valve isolates pump from system with just a quarter turn.
Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
1/4, 3/8, and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.

Check Stock

BLACKHORSE-RACING 12V DC Portable Electric Fuel Transfer Pump Diesel Kerosene Oil Commercial Fuel Transfer Extractor Pump Motor Auto

【Powerful Motor】It can transfer up to 45L/min with a 175W 3600rpm motor, allowing you to extract oil or diesel from your vehicle quickly..
【Safety Assurance】A self-priming, rotating vane pump with an on/off switch and an inner bypass valve ensures reliable operation every time..
【Convenient】The pump can pump can lift oil up to 32 feet so that you don’t need to lift the barrels and tanks making for very convenient on-site....
【Suitable for Different Use】12V battery connecters let you run the pump with cars, motorcycles, vans, quads and other 12V vehicles..
【Something You Should Pay Attention to】The package includes 1 x diesel pump. Note: The oil pump is suitable for diesel, biodiesel, and kerosene....

Check Stock

Robinair (15401) CoolTech Vacuum Pump - 2-Stage, 93 liters/minute

Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
Powerful 1/3 HP, 115V/220-250V - 60/50Hz thermally protected motor, 94 liters per minute free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
durable molded polycarbonate base improves pump balance and minimizes vibration.
Iso-Valve isolates pump from system with just a quarter turn.
Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
1/4 inch and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.

Check Stock

Robinair (15424) CoolTech Vacuum Pump - 2-Stage, 93 liters/minute

Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
Powerful 1/3 HP, 115V/220-250V - 60/50Hz thermally protected motor, 94 liters per minute free air displacement, and factory rated to 20 microns for a fast, thorough evacuation.
Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
durable molded polycarbonate base improves pump balance and minimizes vibration.
Iso-Valve isolates pump from system with just a quarter turn.
Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
1/4 inch male flare and 1/2 inch ACME inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.

Check Stock

Robinair (15121A) CoolTech Vacuum Pump - 2-Stage, 236 liters/minute

Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
Powerful 1/2 HP, 115V/220V - 60/50Hz thermally protected motor, 236 liters per minute free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
durable molded polycarbonate base improves pump balance and minimizes vibration.
Iso-Valve isolates pump from system with just a quarter turn.
Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
1/4, 3/8, and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.

Check Stock

AUTOGEN Single-Stage 4.5CFM Vacuum Pump, 1/3HP 5Pa 110V Air Vacuum Pump for R12 R22 R134a R410a, Rotary Vane Vacuum Pump for HVAC/AUTO AC Refrigerant Recharging, Degassing Wine, Milking Cow

【Rotary Vane Vacuum Pump】AUTOGEN single-stage 4.5CFM rotary vane vacuum pump is powered by a 1/2 HP all copper motor to keep your HVAC servicing fast and easy. Its 4.5 cfm flow rate can draw your system down as low as 37.5 microns (5 Pa). Intake Ports: 1/4" Flare, 1/2" ACME. Voltage/Frequency: 110/60HZ. Oil Capacity: 12.8oz..
【High-Efficiency Heat Dissipation】Reinforced aluminum alloy casing, effective heat dissipation, resistance to chemical corrosion. Its innovative design can prevent oil backflow and separate exhaust gas from the oil mist filter device, reducing pollution and providing safer operation..
【Convenient To Operate】Features a simple oil fill port for a clean pour, oil window provides vital information like oil level and oil quality. The design of a great starting moment is easy for starting and high efficiency, which can keep it working perfectly even is lower ambient temperature and lower volt. 1/4" and 1/2" ports allow fast and easy servicing of automotive and other low-tonnage R12, R22, R134a, and R410a systems..
【Wide Application】Air Vacuum Pump is applicable to vacuum packaging, vacuum freezing, automobile reparation, gas analysis, medicine mechanism, printing mechanism, and other vacuum evacuations. It is also able to....

Check Stock

Fill-Rite FR311VB 115V/230V 35 GPM Fuel Transfer Pump w/Mechanical Meter Package (Gallons)

FLEXIBLE POWER INPUT: This 300 series fuel transfer pump features a dual voltage design that allows you to select either 115V or 230V AC power with the simple turn of a switch..
PROTECTION AGAINST OVERHEATING: Engineered to exceed the industry’s most stringent safety standards, the fuel pump is constructed with thermal overload protection to prevent the motor from overheating during abnormal usage..
FASTER TRANSFERRING: This is Fill-Rite’s highest volume AC pump that transfers fuel at 35 GPM, ideal for filling heavy equipment from above ground stationary storage tanks..
DEPENDABLE & DURABLE PUMP: Made with durable cast iron construction to withstand rough operating environments every 300 series pump includes a limit lifetime warranty..
CONSISTENT HIGH PERFORMANCE: 300 series Fill-Rite pumps are built with Rotary Vane Technology that maintains a consistent flow performance even as components wear from use..

Check Stock

Holley Blue Electric Pump W/O Regulator

...type | Distinctive Blue logo | Flows 110 GPH (free flow) | Flows 88 GPH at 9 PSI | Maximum pressure is 14 PSI | Includes P/N 12-803 fuel pressure regulator | Provides constant fuel flow with no pulsation.
Has externally accessible pressure relief valve (max 14 PSI) | Rotor/vane pump design is more tolerant of contaminated fuels | Weighs only 3 lbs | Includes mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended | Not designed or recommended for use with fuel injection systems.
Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 110 | Free Flow LPH: 416 | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet Size: 3/8" NPT | Material: Aluminum | Motor Finish: Silver | Outlet Size: 3/8" NPT | Product Type: Fuel Pump | Pump Body Color: Silver.

Check Stock