ReviewsBrass Water Ball Valve

SR SUN RISE 10 Inch Shower System Handheld Showerhead & Rain Shower Combo for Easy Reach 1.8 GPM Shower Faucets Sets Complete Shower Fixtures with Valve and Trim kit, Brushed Nickel

  • ...essure balance valve's cartridge monitor water pressure balance, helping to protect you from being scalded by sudden changes in hot or cold water pressure..
  • Pop-Up Water Diverter: Located on the bottom of the surface mounted, easy-access diverter location. Press to switch between handheld and rain shower. Robust all-brass body ensures long life..
  • Durable Material: The shower head with handheld is constructed from brushed nickel plated ABS material which is non-toxic, durable and lightweight. The adjustable swivel ball joint and stainless steel hose give you a larger shower area..
  • You Will Get: 10 Inch Rain Shower Head(ABS with Brass Ball Joint), 7 Settings Hand Shower(ABS), Rough-in Valve and Trims(Solid Brass), Pop-up Diverter (Solid Brass), Adjustable Slide Bar and Shower Holder (304 SUS, ABS), Shower Arm and Surface Mounted (304 SUS), 71 Inch Shower Hose(304 SUS) and Accessories Required for Installation..
Check Stock

NOMAL Brass Float Valve 1/2 inch Float Ball Valve Automatic Fill Adjustable Float Ball Valve for Livestock Waterer, Water Tank, Aquariums

  • Size: 1/2" thread, can fit many pipe connection.
  • No Leak: This float valve is sealed with rubber washer to ensure no leak.
  • Easy to Use: Very easy to install and operate, you can adjust the water level by rotating the metal wingnut or the green float.
  • Widely Used: Brass float valve can be applied for water trough, water tanks, livestock and poultry waterer, pools, aquariums, aquaculture, reservoirs and industrial, et..
Check Stock

SR SUN RISE Shower System with 3-spray Rain Shower and 6-Setting Handheld Combo 1.8 GPM Shower Faucets Sets Complete with Adjustable 27.6\ Slide Bar Shower Fixtures Valve Include, Matte Black

  • ...essure balance valve's cartridge monitor water pressure balance, helping to protect you from being scalded by sudden changes in hot or cold water pressure..
  • Pop-Up Water Diverter: Located on the bottom of the surface mounted, easy-access diverter location. Press to switch between handheld and rain shower. Robust all-brass body ensures long life..
  • Durable Material: The shower head with handheld is constructed from brushed nickel plated ABS material which is non-toxic, durable and lightweight. The adjustable swivel ball joint and stainless steel hose give you a larger shower area..
  • You Will Get: 10 Inch Rain Shower Head(ABS with Brass Ball Joint), 7 Settings Hand Shower(ABS), Rough-in Valve and Trims(Solid Brass), Pop-up Diverter (Solid Brass), Adjustable Slide Bar and Shower Holder (304 SUS, ABS), Shower Arm and Surface Mounted (304 SUS), 71 Inch Shower Hose(304 SUS) and Accessories Required for Installation..
Check Stock

Pfister LG89-7RHB Rhen Shower Only Trim, Matte Black

  • Shower faucet with all brass showerhead for lasting use. Rainfall shower spray pattern for a relaxing shower experience. Brass ball joint..
  • Keep hard water build up off this shower fixture with Wipe Clean nozzles that clean off with the wipe of a finger..
  • Valve NOT included with this shower trim. Must order valve 0X8-310A separately. SecurePfit fixed hub handle threads directly to the valve, providing a more seamless design and eliminating any potential wobble. Easy toolless installation - no exposed screws..
  • Meets ADA/ANSI A117. 1 requirements, ensuring accessibility to all disabled persons..
  • 1. 8 gpm flow rate shower fixture. Rated to meet or exceed CALGreen criteria, which helps to conserve water in the average home by at least 20 percent..
Check Stock

1/4\ Brass Electric Solenoid Valve 110VAC Normally Closed VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...m the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with dif....
Check Stock

Siphon Pump 1/2" Hand Gasoline Siphon Hose for Gas Fuel Transfer Diesel Water Self Priming Shaker Safe Syphon Pump Auto PVC Sipnon Hoses, 6 Feet

  • ...it up and down about an inch. In just seconds the siphon hose is full and flowing. A siphon only works if the outlet end is lower than the inlet and the liquid is deep enough to jiggle the ball..
  • ♠PREMIUM QUALITY MATTERIAL: Siphon pump for gasoline with thick hose wall, it can endure long time use with no crushed. Brass nozzle, PVC tube and industrial strength glass ball make it anti-static and safe for gasoline oil fuel diesel transfer..
  • ♠NYLON TIGHTEN BAND: Gas siphon with a nylon tighten band on brass valve end, you don't worry that the copper head come off from the tube and go into your car oil tank. Before use, please pull the nylon zip tie to keep the brass valve more tightening. Don't pull it out by force..
  • ♠WIDELY USE: Our syphon hose kit efficiently transfers gasoline, diesel, water, oil and urea for car on the go without electricity. Perfect for small household chores, lawn and garden, and outdoor activities. Don't suck gasoline into your mouth any more..
  • ♠ATTENTION: Auto siphon inner diameter 0.56"(1.4cm) and outside diameter 0.72"(1.8cm), brass valve end inner diameter 0.8"(2cm) and outside diameter 0.88"(2.2cm), please measure your container before purchasing and ensure suitalbe fitting, no smaller than our hose and brass valve size.....
Check Stock

DGZZI G1/4 /Ball Valve G1/4' Screw Thread Brass Black Water Cooling Mini Shutoff Valve Water Stop Switch with Red Metal Handle for PC Water Cooling System

  • Made of high quality brass material, durable..
  • Nickel plating provides a smoother, brighter and finer surface..
  • High-flow ball valve structure, safe and reliable..
  • Water ball valve with handle, good sealing and precision teeth, used to easily close part of the water channel, for PC water cooling applications..
  • Be used as a drain valve to clean the water cooling circuit or add new coolant to control the water flow easily..
Check Stock

1 Brass Electric Solenoid Valve 110VAC Normally Closed Water Diesel.

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/4 Brass Electric Solenoid Valve 24VDC N.C Air Water Fuel VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/4\ Brass Electric Solenoid Valve 12VDC N.C. Air Water Fuel VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock