ReviewsBrass bronze Ball Valve

EZ-Fluid Plumbing 3/8-Inch O.D Female Compression x 3/8-Inch O.D Male Comp A Lead-Free Brass Quarter Turn Water Shut Off Straight Repair Add On Stop Ball Valve,Chrome For Kitchen,Bathroom Faucet 1Pc

• EZ-FLUID Plumbing Chrome Brass Water Shut Off Valve, Straight Angle Stop Valve Use for Kitchen, Bathroom Faucet Water Valves and Toilet Water Valve.
• Lead-Free Quarter Turn Ball Valve Straight Angle Stops 3/8-Inch Female O.D. Compression Captured Nut x Outlet: 3/8-Inch O.D. Male Comp w/ Brass nuts....
• Fits on top of faulty valves to provide a shut off quick fix.
• Lead free Chrome Finished brass approved product in all states.
• Pack of 1 pc 1/4 turn straight add on angle stop repair water shutoff ball valve Approved By UPC, NSF.

Decorative Outdoor Faucets Wall Mounted Brass Animal Garden Bibcock with Rural Style Antique Bronze Bird Tap

HZR Copper Ball Valve Internal Water Pipe Equipment Accessory

• Hand tightening provides reducing the risk of leakage and self-locking type design, more convenient for you to use..
• Brass for corrosion resistance, ductility at high temperatures, and low permeability and valve requires no special tools ..
• Working medium: natural gas, liquefied petroleum gas, and each valve individually tested for maximum safety..
• It was widely used in irrigation systems, pipeline systems, oil and gas supply systems with different size and colours..
• Copper ball valve thick brass inner wire for tap water switch, water valve and water pipe valve..

Dragon Animal Shape Garden Bibcock Rural Style Antique Bronze Dragon Tap with Decorative Outdoor Faucet for Garden

Febco 3/4 in Bronze Double Check Valve Assembly-3/4 850

• This 3/4 in. double check valve assembly is designed to prevent the backflow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure in accordance with national plumbing codes and water authority requirements..
• Its compact modular design facilitates easy maintenance with a single access cover for in-line repairs..
• The FEBCO Series 850 Double Check Valve Assemblies are designed for non-health hazard applications..
• This assembly consists of a bronze body construction, NPT end connections, quarter turn ball valve shutoffs, top mounted test cocks, 2 in-line independent positive seating check modules, captured springs, and replaceable check discs and seats..
• Bronze body for durability, Modular compact design, Replaceable seats and seat discs, Top entry.

Harvard Boshart 1 x 11 BRASS Tank Tee Kit installation package with BALL VALVE and CHECK VALVE Water Well Pressure Tank SQUARE D 4060 FSG2 pressure switch NO LEAD

• (1) 1" x 11" Tank Tee(SOLID BRASS, NO LEAD CONSTRUCTION).
• (1) Square D 30-50 Pressure switch, 40-60 available in other listing.
• (1) 1/2" 100 psi Brass Pressure Relief Valve.
• (1) Roll of 3/4" x 520" 3.5 mils Thread tape.

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

• ...male BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
• 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
• 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to worry about leaks occurring, ball valve dn10 will definitely save your time and money..
• 【 Easy to Use 】 Ball valve for foam cannons withstand high pressure operation while providing good leverage, opening and closing pressure washer ball valve effortlessly, allowing safe and easy tool replacement. Helps you switch easily without shutting down the entire system, making your work easier and more convenient..

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

• Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
• 1/2" Brass direct acting with NBR gasket..
• This highly responsive valve will open and close in less than 1 second when actuated.
• meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
• to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
• As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Water Flow Control Valve Brass Construction G1/2 Water High Pressure Regulator Bathroom Shut Off Valve Turn Off Reduce Water Restrictor Switch Device for Shower Head Hose Bidet Sprayer By Bathfinesse

• LEAKPROOFRubber gasket creates a tight seal, no leaking if properly attached the valve to your set up..
• RELIABLEThis shower flow restrictor with premium brass construction and handle, quality material and craftsmanship for durability, resists corrode and tarnish. Advanced leak-proof ceramic cartridge can be operated up to 200 000 times switching cycles..
• WATER FLOW CONTROLLERCan be used as shut-off valve or water saver valve, no more wasting hot water while getting soaped up.Shower valve adapter allows for regulating water volume or completely shutting off water flow while showering..
• EASY TO OPERATELever handle can be operated easily and smoothly even with wet and slippery hands. Simple turn the nozzle to reduce or increase the water flow..
• UNIVERSAL CONNECTIONS1 X G 1/2 female inlet, 1 X G 1/2 male outlet, standard straight thread connections, washer included. Easy to install by hand or wrench. Use for standardized hand shower wand, showerhead arms, bidet sprayer or hoses pipes, which also widely used at home, bathroom, kitchen, RV, Garden etc..
• COVNENIENT ADDITIONNicely matches your existing set up, functional addition to a high flow shower, easy to install without needing extra tools..
• Oil Rubbed Bronze FinishRust-resistant, resists daily corrosion, sc....

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

• Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
• 1/2" Brass direct acting with NBR gasket..
• This highly responsive valve will open and close in less than 1 second when actuated.
• meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
• to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
• As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

• ...m the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
• The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
• This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
• The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
• There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with dif....