ReviewsBrazed Saw

LENOX Tools 1991606 T-Shank Diamond Grit Jig Saw Blade 3 1/2 x 3/8 1 Pack

  • Item Package Dimensions:0.3 cm L X 5.4 cm W X 17.0 cm H.
  • Nickel Alloy Brazed Diamond Particles Maintain Sharpness. Diamond Grit Edge And Chrome Alloy Backing Steel Provide Stability.
Check Stock

SHDIATOOL 4-1/2 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel(for 7/8” Arbor)

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 115mm(4.5"), the incision thickness is approximately 2.3mm-2.4mm, with the arbor of 22.23mm(7/8"), suitable for most of hand-held grinder or trim saw with 7/8" arbor.
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 13,300 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock

Rokrou Diamond Drill Bits Diamond Brazed Hole Saw Kit 10PCS Tile Drill Bit with Hole Saw Guide from 6 -50mm /1/4\-2\ for Tile, Drill, Glass, Marble, Granite …

  • 【10 ᴛɪᴍᴇs ʟᴏɴɢᴇʀ ʟɪғᴇ ᴛɪᴍᴇ】Processed with brazing technology, premium level super fine diamond sand is attached to the coated steel body. Our Brazed Hole Saw can last 10 times longer than an ordinary hole saw..
  • 【ᴍᴜʟᴛɪᴘʟᴇ sɪᴢᴇs】The diamond hole saw contains ten different sizes, including 6mm/0.24" 8mm/0.31" 10mm/0.39" 14mm/0.55" 18mm/0.71" 22mm/0.87" 25mm/1" 32mm/1.26" 40mm/1.57" 50mm/1.97"..
  • 【ғᴀsᴛᴇʀ ᴅʀɪʟʟɪɴɢ ᴡɪᴛʜ ʙᴇᴛᴛᴇʀ ᴅʀɪʟʟ】Compared to the ordinary material hole saw, our drill with fine diamond sand can drill holes on hard materials such as tile, drill, glass, marble, granite, much faster..
  • 【ᴅʀɪʟʟ ɢᴜɪᴅᴇ】No need to worry about scratching your tile when drilling the hole. Our Adjustable hole saw drilling guide with a suction cup and 4 bearings will hold the diamond hole saw still during the process. From 6mm to 50mm all the hole saws can fit in this guide..
  • 【ᴛɪᴘs】When the diamond drill bit is working, continuous cooling with water is key to reduce the chance of burning your bit, extending the life of the drill..
Check Stock

FACHLICH 12\ Metal Cutting Diamond Blade 300MM All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

  • Diameter 12"/300mm,Arbor Hole 25.4mm (1"),for hand-held power cutters, cut-off machines and masonry saws,Thickness 3mm,MAX RPM 5,100.
  • Designed to cut through the tough materials, including granite marble, Aluminum, Auto Body Panels,Cast Iron, Copper Pipe, Corrugated Roofing, Dry wall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco and more.
  • Utilizing vacuum brazed technology, high concentration of industrial premium diamond particles are permanently brazed to the edge of the steel core creating an unbreakable and extremely heat resistant segments which can fast cut nearly all materials without water cooling,generating fewer sparks and alot less dust.
  • Engineered for use one blade for all purpose. Trusted by Fire Fighters, RescueTeams,Police and Demolition Contractors.This diamond blade is used as an emergency rescue and tactical entry tool.
  • Save tremendous amounts of down time due to fewer blade changes,can cut with a constant, even cutting depth..
  • Good Service: Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement free of charge.
Check Stock

Drilax 4 Inch Diamond Hole Saw Ceramic Porcelain Tile Quartz Granite Countertop Glass Bottle Super Long Life Vacuum Brazed Technology Single Pack Tile Drill Bit 4 inch

  • 4 inch super long life vacuum brazed diamond hole saw, tile drill bits, glass drill bits, ceramic drill bits for pots.
  • Standard 3/8 inch shank fits standard drill electric or cordless..
  • High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board.
  • Extra long (tall) diamond drill bits for ceramic tile, diamond core bits for granite and quartz countertop.
  • Tall enough to go through 3cm thick countertops ceramic tile, diamond core bits for granite and quartz countertop.
Check Stock

FACHLICH 14\ Metal Cutting Blade 350mm Diamond Cut Off Wheel All Purpose Heavy Duty for Stainless Steel Rebar Metal Reinforced Concrete

  • Diameter 14"/350mm,Arbor Hole 25.4mm (1"),for hand-held power cutters, cut-off machines and masonry saws,with a 20mm Adapter Bushing for Stihl power saws,Thickness 3.2mm,MAX RPM 4,300.
  • Designed to cut through the tough materials, including granite marble, Aluminum, Auto Body Panels,Cast Iron, Copper Pipe, Corrugated Roofing, Dry wall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco and more.
  • Utilizing vacuum brazed technology, high concentration of industrial premium diamond particles are permanently brazed to the edge of the steel core creating an unbreakable and extremely heat resistant segments which can fast cut nearly all materials without water cooling,generating fewer sparks and alot less dust.
  • Engineered for use one blade for all purpose. Trusted by Fire Fighters, RescueTeams,Police and Demolition Contractors.This diamond blade is used as an emergency rescue and tactical entry tool.
  • Save tremendous amounts of down time due to fewer blade changes,can cut with a constant, even cutting depth..
  • Good Service: Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement free of charge.
Check Stock

Outdoor Power Deals Carbide Chainsaw Saw Chain 20\ 3/8\ 33R-72 050 for Some Stihl MS290 MS291 MS311 MS390

  • 3/8 pitch 0.050 gauge - 72 Drive Link - Semi Chisel Type Chain - Very Aggressive Teeth.
  • Solid carbide tipped chain is brazed to case hardened saw chain for the ultimate in life and cutting ability. Designed for woodcutting keep it up and out of the dirt and avoid hitting solid objects this can break or chip the carbide tooth.
  • ( READ ) MS290 and MS291 can have .325 pitch and this will not fit. Buyer is responsible for verify what pitch chain your saw has.
  • Also NOTE Correct use you must allow the chain to cool back to ambient temperature between uses the teeth with break off if you stop using the chain for any amount of time and then pick it up and start going again. Allow chain to cool a minimum of 3 hours.
Check Stock

Delta Diamond Extreme 14 Inch 2-Pack Metal Cutting Diamond Blade Heavy-Duty All Purpose Cut Off Wheel for Rebar Steel Sheet Metal Angle Iron Stainless Steel & More 1 -20MM Arbor 14 2pcs

  • HEAVY-DUTY VACUUM BRAZED DIAMONDS - Diamonds are permanently bonded to the heat-treated hi-speed steel core by our advanced vacuum brazing process to create the strongest bond possible in even the most demanding conditions and is extremely resistant to heat. Use for cutting and grinding metal such as rebar, copper, galvanized steel, conduit, angle iron, ductile iron, stainless steel, and more. Will also cut through plastic, PVC, drywall, concrete, granite, and more..
  • LASTS 100X LONGER - A single Diamond Extreme blade outlasts and out performs up to 100 abrasive cut-off wheels. Save time by using one blade without having to constantly put on a new disc after a few cuts. Diamond Extreme blades use a heavy-duty vacuum brazed diamond bonded segment and will not wear out as fast as other diamond discs..
  • CONSTANT CUTTING DEPTH & SAFER - Abrasive discs wear down and will shrink which can be dangerous. Diamond Extreme maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust. Commonly used by fire departments for fire/rescue situations across the country..
  • SPECIFICATIONS - 2 Pack of 14" diameter X .140 thick with a 1"....
Check Stock

Delta Diamond Extreme 14 Inch Metal Cutting Diamond Blade .135 Wide X 1 Arbor with 20MM Bushing Heavy-Duty All Purpose Cut Off Wheel for Rebar Steel Sheet Metal Angle Iron Stainless Steel & More 14

  • HEAVY-DUTY VACUUM BRAZED DIAMONDS - Diamonds are permanently bonded to the heat-treated hi-speed steel core by our advanced vacuum brazing process to create the strongest bond possible in even the most demanding conditions and is extremely resistant to heat. Use for cutting and grinding metal such as rebar, copper, galvanized steel, conduit, angle iron, ductile iron, stainless steel, and more. Will also cut through plastic, PVC, drywall, concrete, granite, and more..
  • LASTS 100X LONGER - A single Diamond Extreme blade outlasts and out performs up to 100 abrasive cut-off wheels. Save time by using one blade without having to constantly put on a new disc after a few cuts. Diamond Extreme blades use a heavy-duty vacuum brazed diamond bonded segment and will not wear out as fast as other diamond discs..
  • CONSTANT CUTTING DEPTH & SAFER - Abrasive discs wear down and will shrink which can be dangerous. Diamond Extreme maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust. Commonly used by fire departments for fire/rescue situations across the country..
  • SPECIFICATIONS - 14" diameter X .140 thick with a 1" arbor. In....
Check Stock

SHDIATOOL 5-Piece 4 in Diamond Jig Saw Blades for Tile Ceramic Brick Granite Marble with T-Shank 46 Grit

  • 4 in.(100mm) overall length, Color: golden, 5 pieces pack..
  • 46 grit diamond matrix for fine, straight or curved cuts..
  • Designed for cutting granite marble ceramic tile brick plastic.
  • High Professional Quality Vacuum Brazed Diamond Jig Saw Blades.
  • If you have any needs or questions about our products,please contact to us firstly, thanks, we have good After-sales service.
Check Stock

GONGJU31 M14 Marble Drill Bit 6-35mm Hole Saw Angle Grinder Diamond Drilling Hole Saw Cutter tool Home Improvement (Color : 8mm)

  • It has proven capability and durability..
  • 6mm-35mm M14 Marble Drilling Bit Angle Grinder Diamond Drilling Hole Saw Cutter tool.
  • - This Brazed Drilling Core Bit is mainly secondhand for Angle grinder..
  • - Strong opening performance, fast drilling speed, smooth drilling without unseamed..
Check Stock