ReviewsBrazing Annealing Furnace

SH Scientific Laboratory Muffle Furnace SH-FU-3MG(Tmax 1200℃/Continuous Running 1000℃). 3L Chamber. Metal/Ceramic/Plastic/Titanium Thermal Treatment. Annealing/sintering/Melting/Combustion. 110V

Laboratory benchtop muffle furnace with swing door. Max temperature 1200℃. Recommended ideal running temperature is below 1000℃.
Heating from 4 sides and excellent temperature uniformity (+/-2.5%), double housing and low surface temperature (29~30℃ at 800℃).
Water, soil, ceramic, metal, alloy, plastic and battery electrolyte analysis, heat treatment and innovation. Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer.
Light weight (34kg, 75lbs), 130x250x90mm internal, 3L, 1.4kW heater,110V.
Universal use for metal and ceramic heat treatment including annealing, sintering, melting, combustion, ashing and densification..

Laboratory benchtop muffle furnace with swing door. Max temperature 1200℃. Recommended ideal running temperature is below 1000℃.
Heating from 4 sides and excellent temperature uniformity (+/-2.5%), double housing and low surface temperature (29~30℃ at 800℃).
Water, soil, ceramic, metal, alloy, plastic and battery electrolyte analysis, heat treatment and innovation. Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer.
114kg / 253lbs, 300x300x300mm internal, 27L, 4.9kW heater,220V hardwire.
Universal use for metal and ceramic heat treatment including annealing, sintering, melting, combustion, ashing and densification..

Lightweight core design, the core of the radiator is welded in vacuum brazing furnace, no epoxy.
All aluminum construction & TIG-welded craftsmanship fully. High performance design, improves cooling by 30 -45% temp.
Build-in trans cooler and engine oil cooler.
Your item will be shipped out within 1 day from our USA warehouse(chino, walton or monroe township), faster fulfillment by us and 3-6 days will be....

1、Specification: 1"(Thick) 1inch (Thick) x24inch x60inch.
2、High Temperature Insulation: Ceramic fiber blanket is high heat and fireproof blanket, with high temperature resistance, insulation and fireproof.
3、Easy to Install: easy to install by using mechanical fastening or high temperature adhesive, such as sodium silicate, refractory cement or RTV silicone.
4、Easy to Operate: easy to cut and press by using a sharp knife or blade Very easy to transport and install.
5、Applicable to: fireplace insulation, foundry, such as wood stove baffle, fireplace, pellet stove, chimney, boiler, pizza oven, forging furnace, brazing, welding, soldering, muffler packing, etc.

All aluminum construction, Lightweight 3 core design, the radiator core is welded in vacuum brazing furnace, no epoxy.
The cooling shroud, designed with louver to direct airflow, improving heat rejection.
This cooler Includes high-pressure rad cap and magnetic drain plug.
Direct fit for Chevrolet C10 C20 C30 K10 K20 K30 Pickup Suburban V8 1974-87.
Chevrolet R1500 / R2500 Suburban L6 V8 1989-1991.
Chevrolet R10 / R20 Suburban V8 1988-1987.
GMC Jimmy 1973-91 V8. As for other models, pls check vehicle fitment on the top of page.

Fireproof Insulation: Ceramic fiber blanket, rated to temperature of 2600F, 1 inch X 24 inches X 150 inches, density 6lbs..
Chemical composition: Alumina (32%-34%), Silica (49%-52%), Zircon (14%-18%)..
For Whom: Perfect for Blacksmiths, Pottery Workers, and Refiners..
Uses: Insulation for Forge, Furnace, Kiln, Knife Making, Pizza Ovens, Outside Ovens, , Wood Stove, Home Foundry, Heat Treatment & Glass furnaces and in process of Glass blowing, Turbine, Brazing, Welding, Soldering, Muffler packing, Fireplace Insulation, Boiler, Foundries, Refractory Wool, Glass Blowing, Jewellery Making, Fireproof Doors..
Easy Installation: Easy to install with mechanical fastening or high temperature adhesive such as sodium silicate, refractory cement or RTV silicone..

Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
Centurion series regulators with Protective rubber gauge boots.
Front valve welding handle with stainless steel ball point valves for accurate Gas control.

【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..

Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
Sil-flo is not recommended for ferrous metals such as iron or steel.

It is a powder flux formulated for brazing gold and silver..
Jar of welding powder brazing flux powder welding cast consumables jewelry weld repair supply.
There are 250 grams in this jar, which will definitely meet your needs..
The powder melts at 700 degree centigrade..
Brazing powder improves the weldability of metal in the process of high temperature welding..