ReviewsBrazing Of Aluminium

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection 4-Pack

Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
Single stage Patriot series regulators with protective rubber gauge boots.
Front valve welding handle with stainless steel ball point valves for accurate gas control.
Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.

5% Silver Bearing: USA AWS A58 Class: BCuP-3 brazing alloys rods. Contents: Silver (Ag) 4.8-5.2%.
Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
Best Performances: Solidus Temperature: 1189°F / 643°C, Liquidus Temperature: 1419°F / 771°C. Recommended Joint Clearance: 0.003"/0.006.

15% Silver Bearing: USA AWS A5.8 Class: BCuP-5 brazing alloy rods. Contents: Silver (Ag) 14.5-15.5%.
Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight (Minor weight difference might exist in each tube, which is normal). GREAT SAVING!.
Best Performances: Solidus Temperature: 1193°F / 645°C, Liquidus Temperature: 1472°F / 800°C, Recommended Joint Clearance: 0.002"/0.006.

For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze.
This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch.
Active Temperature Range: 1400 to 2200 F (760 to 1205 C).
Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards.
Brazing Flux Powder comes in 8-Ounce container, Made in the USA.

Fluxed coated Cadmium-free 45% Silver brazing rods. 1/16" Core (3 Sticks).
For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum..
For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron..

Air/Acetylene Soft Flame Kit has always been the Old Reliable flame tool for plumbers.
Produces a precise 2700 Degrees Fahrenheit target heat for soldering and brazing copper tubing.
Capable of soldering up to 1/2 inch and brazing up to 3/8 inch copper tubing with supplied tip.
Torch Handle with rear control valve for accurate gas control and positive shutoff.
Acetylene Regulator for MC Tank with protective rubber gauge boot.

【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.

【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.

Fluxed coated 56% Silver brazing rods, 1/16" Core. (3 Sticks).
For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum..
For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron..
Meets AWS A5.8 BAg-7. AMS 4763, QQB-654A Class BAg-7.

Excellent quality, easy flowing, low fuming brazing rod for nearly all your brazing needs.
65,000 PSI tensile strength Melting Point: 1,600-Degree F (871-Degree C).