ReviewsBrazing Tip Cleaner

Welding Torch Nozzle Tip Cleaner 21Pcs Stainless Steel Gas Welding Cutting Nozzle Tip Cleaner with File 3inch*5.1inch for Soldering Welding

VARIOUS SIZES TIP CLEANER: 21pcs nozzle cleaners are enough for using with stable performance. Comfortable in use and quality assured design, suitable for a variety of occasions, can provide you with a lot of convenience.
VERSATILE WELDING TIP CLEANER: The stainless steel tip cleaners are used to clean welding and cutting nozzles to restore nozzle performance. Lightweight design, compact size, portable and practical.
HIGH QUALITY NOZZLE CLEANER: This welding nozzle tip cleaner adopts high quality stainless steel material, which is characterized by durability, wear resistant in use, long lifetime service.
PORTABLE CUTTING TIP CLEANER: There is a 21pcs welding nozzle cleaner and 1pc file in a aluminium box which is convenient to carry. High quality for durable and long-lasting use.
WIDE APPLICATION TIP CLEANER: This welding torch nozzle tip cleaner is suitable for soldering pins, dredging the contact tip and cutting tip. Simple and reliable in general applications.

Check Stock

Goss KA-725-M12P Welding and Brazing HVAC Torch Tool Kit with Stand for \MC\ Acetylene Tanks

...des enough range for working around, the included handy clip helps to hang the gas cylinder to any convenient places, gives you more move freedoms and working safety Patented Super Swirl flame tip and combustion system are specially designed to provide powerful turbo cyclone flame, resists flame blowout and reduces brazing time by 30%. Improve capacity to burn medium to relatively large copper or other metal pipes..
Ergonomically designed handle installed with build-in trigger start system to make it super easy to ignite the flame. Brass constructed threading regulator assure durability and reliability, pressure regulated for consistent performance even when tiled or momentarily inverted. adjustable flame control knob can easily sized flame for different applications.
Added 15% Silver into Phos-Copper brazing rods.A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The temperature at which it melts from a solid to a liquid is 1472°F..
Each 0.5 lb tube contains 19 sticks of 14" brazing rods. Significantly lower melting point:A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The melting temperature from solid to liquid is 1472°F..
Enhanced metallicity: The addition of silver will improve t....

Check Stock

Soldering Tip Cleaner Solder Tip Cleaning Wire and Holder Soft Coiled Brass Tip Cleaner Kit with 5 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips, No Water Needed

【Excellent Product Performance】 XOOL Soldering tip cleaner cleans better than conventional sponges. It doesn’t need water so that will not reduce the tip’s temperature. There is no contamination risk compared to conventional tip tinners. It avoids premature wastage of soldering iron tips. And it greatly reduces the rate of oxide accumulation in soldering iron tips compared to conventional tip cleaners..
【High Quality】 Soldering tip cleaner wire uses high quality brass material. When you plug the soldering iron on tip cleaner, the tip will be cleaned thoroughly. Your tip will be cleaned cleaner and faster. Soft coiled brass tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life..
【Humanized Design】 The holder has a ball shell design. When you clean your soldering iron tip, there won’t have tin residual out the container, which will keep your workbench cleaning..
【Save Time】 Water on a sponge drops the tip temperature quickly and depending on how fast your equipment can recover you may save down time with the XOOL soldering iron tip cleaner. Use XOOL Solder Tip cleaning wire will improve your work efficiency..
【Easy to Use】 The holder has two parts. You can separate the two parts to clean....

Check Stock

RX WELD Upgrade version Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Outfit With Portable Tool Bag

Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
Move the torch tip slowly along the line of your cut until the metal has fully parted.
【Complete Accessories】The portable oxy brazing welder features with hoses,welding and cutting torches,goggles,tip cleaners and spark lighter.There is a heavy duty molded storage case packing a spanner for easy carrying and transport..
【BUILT TO LAST】Constructed of heavy-duty metal parts, this welding torch set is ideal for first-time metal workers.
This brazing kit is designed with copper tips and brass fittings for strength, durability, longevity, and precision.
The plastic blow molded case provides safe storage for this portable torch kit.

Check Stock

ZENY NEW Portable Gas Welding Cutting Torch Kit w/Hose, Oxy Acetylene Brazing Professional Set with Case

Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1/2" with appropriate tips.Perfect for an Amateur Metalworker or a Seasoned Professional.
High-capacity Oxygen and Acetylene regulators, with a full 2 1/2" diam. for optimal performance..
Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability.Precision torch handle with dual check valves, cutting attachment and cutting tip (size No. 0).
The whole Kit is constructed of stainless steel and brass for durability. Suitable For Home And Business Applications,Packed in ABS case, Lighter weight, easy to carry.

Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....

Check Stock

Soldering Tip Cleaner Solder Tip Cleaning Brass Wire Holder Soft Coiled Brass Tip Cleaner Kit, No Water Needed (Black)

【High Quality】 Soldering tip cleaner wire uses high quality brass material. When you plug the soldering iron on tip cleaner, the tip will be cleaned thoroughly. Your tip will be cleaned cleaner and faster. No water required,no temperature losing..
【Protect your iron tip】Brass tip cleaner is softer than the iron tip and harder than the oxide on the tip. So it can reduce the accumulation of oxide effectively and prolong soldering iron tip service life..
【Easy to use】No need wet sponges. Simply plug the iron tip in the coils to clean the tip thoroughly..
【Humanized Design】 The holder has a ball shell design. When you clean your soldering iron tip, there won’t have tin residual out the container, which will keep your workbench cleaning..
【Save Time】 Water on a sponge drops the tip temperature quickly and depending on how fast your equipment can recover you may save down time with our soldering iron tip cleaner. Use our Solder Tip cleaning wire will improve your work efficiency..

Check Stock

Soldering Tip Cleaner Solder Tip Cleaning Wire and Holder Soft Coiled Brass Tip Cleaner Kit with 5 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips, No Water Needed

✅A must have kit for cleaning soldering tips: this soldering tip brass cleaner cleans much better than conventional sponges, it’s no need water, will not reduce the tip temperature when clean tips, also no solder ball breaks out than conventional tip tins, improve work efficiency..
✅The soldering tip cleaner can prevent the iron tips oxidation effectively, to prolong the life of your tip, they help to remove oxides and excess solder to preserve tip life and enable clean precise soldering. Soldering tip cleaner wire uses high quality brass material, It is smokeless, tasteless, non-toxic, Soft coiled brass tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life..
✅Extra 4pcs replacement brass pads: a brass tip cleaning ball can improve your soldering capabilities and it's way better than paper, sponge or steel wool. No contamination risk compared to conventional tip tinners with this soldering iron cleaner..
✅Two part construction makes it easy to dispose of hardened solder that collects in the bottom.The solder cleaner has two parts, You can separate the two parts to clean tin residual easily with welding tip cleaner. the ball shell and domed housing design with the hold, tin slag will not splashed on t....

Check Stock

Diablo by Freud DMARG1220-S5 5 pc SPEEDemonâ„¢ Red Granite Carbide Tipped Hammer Drill Bit Set (5-Piece)

Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits.
Multi-ground Grip Point Tip delivers stability and accuracy required for fast, precise holes. More holes per charge in cordless impact and drill drivers. Maximum performance in hammer or rotary drilling applications..
Hi-performance brazing and hardening process extends life of carbide tip and increases productivity. Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability..
Set features 5 bits: (1) 5/32” x 4” x 6”, (1) 3/16” x 4” x 6”, (1) 1/4” x 4” x 6”, (1) 5/16” x 4” x 6”, (1) 3/8” x 4” x 6”.

Check Stock

Soldering Tip Cleaner Soldering Iron Tip Cleaner Brass Tip Cleaner Kit and 6PCS Brass Ball Wire-type with 1PC Ball Shell Holder for Cleaning Solder Irons and Tips

A must have for cleaning soldering tips: this soldering tip cleaner cleans much better than conventional sponges, it's no need water, will not reduce the tip temperature when clean tips, also no solder ball breaks out than conventional tip tinners, improve work efficiency..
Advantage: the soldering tip cleaner can prevent the iron tips oxidation effectively, to prolong the life of your tip, they help to remove oxides and excess solder to preserve tip life and enable clean precise soldering..
Humanized Design: the ball shell and domed housing design with the hold, tin slag will not splashed on the workbench, keep a cleanly working environment..
Extra 6pcs replacement brass pad: brass tip cleaning ball can improve your soldering capabilities and it's way better than paper, sponge or steel wool. No contamination risk compared to conventional tip tinners..
Helpful and Saving time: when the iron head inserted into the brass wire tip cleaner, the tip will be cleaned thoroughly, convenient and efficient, improve work efficiency..
Kulannder Soldering tip cleaner is a best replacement of the traditional sponge, the tip can be cleaned thoroughly, convenient and efficient, improve work efficiency..

Check Stock

WeldingCity Medium Duty 1-piece Type Victor Style Acetylene Welding Brazing Nozzle 0-W-1 (Size 0) with W-1 Mixer for 100 Series Torch Handles

Premium Victor style acetylene gas welding/preheating/brazing nozzle W-1 series one-piece type for 100 series torch handles (not for J-100 series)..
Double O-ring sealed spiral mixer (W-1 type) blends oxy-acetylene gas. 65° elbow angle. Brass coupling nut with built-in snap ring..
Medium duty welding/preheating/brazing for use with oxygen-acetylene gas. Work with Victor light to medium duty 100 series (not J-100) torch handles such as 100C/100FC/WH26/WH260 and other aftermarkets versions..
Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5, 6 and 7. Pack of 1 welding nozzle..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock