ReviewsBreadboard Circuit Board

UCTRONICS GPIO Breakout Kit for Raspberry Pi Pico- Assembled Pi T- Type Breakout + 830 Tie Points Solderless Breadboard + 40 Pin Male - Female - Male Rainbow Ribbon Cable + 65pcs Jump Wires

  • Application: Suitable for Project with Raspberry Pi 3 2 Model B B+ A+ A,zero W and Raspberry pi zero.
  • Convenient: Breadboard and T-type expansion board make the experiment more convenient.
  • Compatibility: You can connect all version raspberry of the board to various sensors and electronic components with the GPIO extension board.
  • Package: A T-type expansion board, 830 Tie Points Solderless breadboard, 40 pin male to female to male Rainbow Cable and 65pcs breadboard jump wires.
  • Detailed instructions, worry-free warranty, strong technical support & great customer service.
Check Stock

Aoicrie Jumper Wire Kit, 840 Pieces Preformed Breadboard Jumper Wire Kit,14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • This kit is the most complete Breadboard Jumper Wires set which contains high quality assorted U-Shape Jumper Wires, assorted solderless flexible jumper cables, tweezer, with which you can do all kinds of circuit experiments..
  • 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm. Note: The kit may also be equipped with a 26AWG jumper..
  • Easy to use : each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard ,all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard..
  • Wide Application : designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
  • Package includes : contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size,Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
  • if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.come with a f....
Check Stock

Treedix Breakout Board Module with Pin Header for Teensy 3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions. The breakout board is well-made, gold-plated on both sides to prevent oxidation..
  • All pins on the breakout board are accessible, Teensy3.5 is compatible with arduino integrated development environment (IDE).
  • Simple and easy to assemble, can be used in conjunction with a breadboard, the spacing between the holes on the board: 2.54mm.
  • The breakout board module can easily extend the Teensy 3.5/3.6 project to industrial control, home automation or other applications..
  • Note: The package is not include Teensy development board and breadboard.
Check Stock

DORHEA 4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro USB Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0

  • The Nano for motherboard can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality..
  • It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system..
  • More breadboard space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • This board is using the chips ATmega328P and CH340, not FT232, Support ISP download.
Check Stock

YUEONEWIN 130 Pcs Breadboard Jumper Wires Kit 4pcs 400 & 830 Points Solderless PCB Breadboards and 126 Pcs Flexible Bread Board Jumper Wire Set for Arduino Prototyping Circuit DIY Electronic Project

  • 【Package Included】Solderless Breadboard Kit includes 2pcs 400-point breadboard, 2pcs 830-point breadboard and 126 pcs flexible breadboard jumpers,....
  • 【Material】400 and 830 connection point breadboards are made of high-quality ABS plastic panels and high-grade tin-plated phosphor bronze contacts,....
  • 【Design】There are metal strips under the breadboard board to connect with the holes on the top. Note that the top row of holes and the bottom row....
  • 【Wide Applications】This breadboard jumper kit can use 20-29 Awg (0.3-0.8mm) wires to interconnect any components, ideal for setting up test....
  • 【Service Guarantee】If you have any questions about these solderless breadboard kits, please feel free to contact us and we will reply within 24....
Check Stock

AITRIP 10PCS for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Microcontroller Board, Compatible with Arduino Electronics Development Board

  • This board is using the chips ATmega328P and CH340, not FT232 as official Arduino.
  • More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • you will get 10pcs Mini Nano V3.0 ATmega328P 5V 16M Microcontroller.
Check Stock

ACEIRMC for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (6 Pack)

  • download the driver of Nano V3.0 at: http://bit.ly/2jKlJMO.
  • Nano's got the breadboard-ability of the compatible for Board and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • The Nano is using the chips ATmega328P and CH340, not FT232 as official compatible for Arduino, so pls. use the driver from above link..
  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
Check Stock

Goupchn Mini Grabber Test Hooks to Breadboard Female Jumper Wires Soft Flexible Silicone Test Leads for Electrical Testing

  • Test leads are made of high quality silicone material. Silicone can help with longevity and easy of use. Silicone leads are soft and resistant to high and low temperature..
  • Mini grabber test hook clips are made of copper alloy. High quality, strong electrical conductivity, firm and difficult to bend and deform..
  • The other end of the test wires is female jumpers for breadboard projects, which is pure copper insulated for smooth conductivity. Suitable for connecting a wire to breadboard from power supplies, LED strips, multi-meters and Lilypad..
  • Perfect for electrical and electronic testing. They're also suitable for Arduino, Raspberry Pi, Orange Pi, wearable circuit projects or a breadboard experiment..
  • Package include: 10PCS Minigrabber Test Hook to Breadboard Female Jumper Wires 5 colors. Length: about 27.2cm. 5 colors help you distinguish them well when doing testing..
Check Stock

12Pcs Small Solderable Breadboard 170 Tie-Points Mini Breadboard Kit Mini PCB Prototype Solderless Breadboards Bread Boards Circuits Beadboard Lkelyonewy

  • [Suitable for small items] These mini-breadboards are useful for small projects. In particular, they are useful for holding the smaller stacking....
  • [Firmly connected] Great little breadboards for creating small circuits. Good solid connections and decent quality. They can interlock with one....
  • [Less wiring] Rugged and durable small breadboard. It is very suitable for transferring arduino projects to smaller projects with minimal wiring..
  • [Multiple colors] The pins tightly and firmly fix the components. The colors are very bright, which helps to identify the board on each board..
  • [No need to solder] You can connect wires together to form a circuit, instead of soldering a bunch of stray wires, they are small, easy to stick, and....
Check Stock

SIM&NAT 12inch / 30cm 40 Pin Male to Female Dupont Wire, 40 Pin Male to Male, 40 Pin Female to Female Breadboard Jumper wire Ribbon Cables kit for Arduino Raspberry Pi 2 / 3 (120 PCS)

  • The pitch of each end of the wire is 0.1 inch (2.54mm).
  • 40 pin jumper Wire are easy to separate from the ribbon.
  • Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc..
  • Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)Description.
  • The wires are easy to peel apart and great for making good looking prototypes.
  • Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders..
  • Insert onto the SW LED pin on the typical desktop computer mother board..
  • Test bread boarding projects or for any breadboard experimenter..
  • 1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires.
Check Stock

Treedix 5pcs 164ft Copper Hookup Wire Kit Wrapping 30AWG Cable Jumper Wire Solid Core Tinned Copper Wrapping Wire 5 Color

  • The tinned copper wrapping wire can work perfectly for going through the holes in a breadboard. The color can help make it easy to keep what runs where in check..
  • 30AWG Spec: Outside diameter: 0.254mm/0.01in.
  • 30 Gauge is perfect for low voltage wiring..
  • Using PVC cover material whose heat resistance can be up to 105℃, insulation and flame retardant, safe and reliable.
  • Using tinned copper wire core material which is anti-oxidation, more stable transmission..
  • Suitable for welding wrapping wires of notebooks, motherboards, LCD screens, displays and other circuit boards, winding, making test fixtures, high temperature resistant wiring..
  • A tool for connecting two nodes on the circuit board directly with wires due to design defects, test purposes or other design considerations..
Check Stock