ReviewsBreadboard Kit

WayinTop Electronics Component Fun Kit w/E-Book Upgraded Electronic Starter Kit with Breadboard Jumper Wires Kit PCB Soldering Kit LEDs & Resisitor Kit for Arduino/for Raspberry pi/ESP32/ESP8266

【The Most Complete Electronic Starter Kit】The chosen components are the most complete mix to support a huge variety of projects. Including....
【Breadboard Power Supply】The core module of the starter kit, which power through USB power cable or power by 9V 1A DC adapter. Lamp/digital....
【Breadboard Jumper Wires Kit】Our kit comes with breaboard, power supply, pin header and also each type of jumper wires - ribbon cables / U-shape....
【PCB Soldering Kit】Our kit also add single-sided PCB board, double-sided PCB board, solder wire, you can also learn how to solder running LEDs and....
【Relaiable Technical Support】Detailed tutorials and datasets can be provided for free, please contact us at any time by email to get the eletronic....

Check Stock

Breadboard Wires Jumper Wires Dupont Cable 120pcs Multicolored 20cm 40 pin Male to Female,Male to Male,Female to Female Breadboard Jumper Wires Ribbon Cables Kit

Jumper Wires Kit,Michael Josh Electrical Solderless Breadboard Ribbon Cables.
The Jumper Cable can be separated according to the demand.
Compatible with 2.54mm spacing pin headers,and to support non-standard odd-spaced headers.
Great for Arduino breadboard kit projects,Portable design, easy and safe to use.
In the terminals have not damaged it can be reused, if damaged can also be used for soldering.

Check Stock

REXQualis 6PCS Small Breadborad 400 Point Solderless Breadboards for Proto Shield Distribution Connecting Blocks

400 Points Breadboard with 2 Positive & Negative Power Lines on both ends..
White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips..
With Self-Adhesive Tape on the Back, Easy to Stick on the Arduino Prototype Shield..
Inter Connect Any Components with 20-29 Awg (0.3-0.8mm) Wire..
Good for Arduino Breadboard Jumper Wires kit Project and other Electrical DIY kits..

Check Stock

Vilros Raspberry Pi Pico with Header Complete Starter Kit

Raspberry Pi Pico Complete Starter Kit Includes Basic Items needed to get started with Raspberry Pi Pico Projects.
Includes Storage Bag to protect and keep all the parts neat.
Includes The Raspberry Pi Pico Board with Presoldered Headers featuring the RP2040 microcontroller chip designed by Raspberry Pi in the UK.
Includes: Data and Power Cable--Half Size Breadboard and Jumper wires--Battery Holder (Does NOT include batteries)--Project panel that holds the breadboard and battery holder in place and storage bag.
All parts under the Vilros full 1 year warranty.

Check Stock

Vilros Getting Started with MicroPython on Raspberry Pi Pico Kit

Vilros Getting Started With MicroPython on Raspberry Pi Pico Kit.
LEARN TO PROGRAM: 48 Page Full Color Guide features clear instructions with screenshots and covers: Getting to know your Pico, Programming with MicroPython, Physical computing, More Pico projects--Also Includes a Pin Reference Card for easy Pico Wiring.
CUSTOM PICO PARTS: Includes Battery Holder with Micro USB connector to power on the go, USB Cable to connect to a PC and program and a Panel to neatly hold the breadboard and battery holder for a neat and easy wiring experience.
STORE AND CARRY: Includes a Picoboat case to protect your pico when not in use and also includes a neoprene bag to store all the parts of the kit neatly.
HIGH QUALITY COMPONENTS: Includes 30 × Jumper wire variety --1 × Full Size (800 Hole) Solderless breadboard--12 × Assorted Color LEDs: ---5 × Push-button switches--10 × 330 Ω resistors--1 × Active piezoelectric buzzer--2 × 10 kΩ potentiometer--1 × HC-SR501 PIR sensor--1 × I2C 1602 LCD module--1 × WS2812B LED strip-- All Packed in a Clear hard plastic box for small part storage.

Check Stock

Gikfun Mini Solder-able Breadboard Gold Plated Finish Proto Board PCB for Arduino Electronic DIY (Pack of 5PCS) GK1009

Breadboard PCB for any type Raspberry Pi GPIO..
Gold plated finish prevents oxidation, High quality Gold finish for easy soldering..
All holes are through-plated for strength.Hole spacing 2.54mm.
5PCS Mini Gold Plated Finish Solder-able Breadboard PCB Diy Kit.Packed with the high quality box..

Check Stock

kuman Raspberry Pi 4 B Holder Breadboard Kit, 7 in 1 RAB Holder kit Compatible for Arduino, Mega 2560 & Raspberry Pi 3 Model B, 2 Model B,1 Model B+ RPI Zero and Zero W

This 7 in 1 RAB Holder kit is designed by Kuman for the Raspberry Pi and for Arduino hobbyists, the holder is large enough for a Raspberry Pi 3B/ 2B/ 1B+/ Zero/ Zero W, for Arduino or Mega 2560, and a 400 hole or 830 hole Circuit Board breadboard(for Arduino rapsberrry pi motherboard and 400 breadboard are not included)..
Gift: GPIO 40 pin Table Card for wiring Pi and BCM codes for all RPI motherboard..
Including RPi GPIO Breakout Expansion Board and Ribbon Cable, which are special for Raspberry Pi 3 Model B, 2 Model B, 1 Model B+ and zero/ zero W..
This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails..
Comes with male-to-male 65pcs jumper wires, red, green, and yellow LEDs (three for each color), ten 1k resistors, a screwdriver, and some screws..

Check Stock

Makeronics 1660 Tie-Points Solderless Breadboard+Electronics Fun Kit |140 PCS U-Shape Jumpers |65 PCS Wires | Power Supply Module|Precision Potentiometer for Prototyping Circuit/Arduino/Raspberry Pi

✔️1660 Solderless Breadboard plus Electronics fun kit,Compatible with Arduino and Raspberry Pi.
✔️A Breadboard and Power Supply Module -Include a good range of LEDs, resistors, buttons, capacitors, a few transistors and diodes..
✔️140 pcs U-shape Solide Copper Jumper Wires plus 65 PCS Copper Jumpers Meet your project expetation。.
✔️Better improvement on product quality and durablity.
✔️Perfect for Arduino Shield Prototyping and Testing. Powered by Makeronics Technology.

Check Stock

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.

Check Stock

WayinTop RPi GPIO Breakout Expansion Kit for Raspberry Pi 4B 3B+ 3B 2B B+, T-Type GPIO Expansion Adapter Board + 830 Tie Points Solderless Breadboard + 40pin GPIO Flat Ribbon Cable + 65pcs Jumper Wire

【Updated Starter Kit for Raspberry Pi】This is a updated Assembled starter kit for for Raspberry Pi 4B/3B+/3B/2B/B+, including GPIO Adapter Board with Wiring Diagram Card, 40pin GPIO Rainbow Fat Cable, 830 Tie Points Solderless Breadboard and 65pcs Jumper Wire..
【GPIO Adapter Board with Wiring Diagram Card】You can connect much version raspberry of the board to various sensors and electronic components with the GPIO extension board..
【40pin GPIO Rainbow Fat Cable】IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable.
Material: High-quantity copper soft wire material for safe and durable.
Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests..
【830 Tie Points Solderless Breadboard】made of high quality ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling, with self-adhesive tape on back and multiple links to buckle..
【65pcs Flexible Jumper Cables】Flexible, durable, reusable, easy to connect and disconnect.
4 Kinds of length: 12cm(49pcs), 16cm(8pcs), 20cm(4pcs), 24cm(4pcs).
these jumper cable wires can connect each other through the pin connection, do not need welding, can fit for fast circuit....

Check Stock

REXQualis Accessories kit Compatible with Raspberry Pi 4 3B+ 3B 2B B+ A+ Zero w/Solderless Breadboard + GPIO T Type Expansion Board + Jumper Wires + Rainbow Ribbon Cable + Resistors

This kit is compatible with the Raspberry Pi 4 3B+ 3B 2B B+ A+ Zero..
The GPIO expansion board is in a fancy T-shape, compatible with all 40-Pin Raspberry Pi Models..
High Quality Solderless Breadboard: 830 tie-points and 400 tie-points Solderless Breadboard, 2 independent power rail sets in total Adhesive backing Solid construction..
Jumper Cable Wires Kits: 65 pcs several lengths Male to Male jumper wires, 40pin Rainbow Ribbon Cable and 20pin Male to Female jumper wires, Makes wiring a cinch,meet all your needs..
Perfect Packaging: Sturdy plastic case can more perfectly protect product not damaged during transportation..

Check Stock