ReviewsBreadboard Wire

MEGA2560 Screw Terminal Block Breakout Module with Aluminum Enclosure, for Arduino MEGA 2560 R3

  • Screw connection will hold tightly.Solder good,holds both stranded and solid copper wires secure.Fits good in circuit board,doesn't twist and break when the screws are tightened,will not lose or slip around.The leads are aligned for a standard breadboard and fit securely.The pins themselves are slim enough to fit through the holes,doesn't destroy the plating on the inside..
  • Won't lead to strip screw heads,broken solder joints or poor connections.Makes good electrical contact,looks good and neat.Not allow the wire to get off-center when inserted.The connector will not melt things when soldered to them.They are not too thick that fit perfectly next to each other on a protoboard.You can jam them in there and they sit parallel..
  • Easy to insert into prototype boards and solder the pins.These connectors work well on PCBs.Can be used on a breadboard power rails if plugged in at an angle.The screw connections can open enough to let a wire enter freely,doesn't make it difficult to enter and tighten the wires.Make it easier to swap out things like simple antennas,low voltage power sources,sensors,ect..
  • Needn't over-torque the screws and they will hold up fine.When you want to move wires,wires come right out with the slightest movement.Great for mounting on or in ....
Check Stock

HiLetgo 3pcs 400 Ties Mini Solderless Breadboard Universal 400 Contacts Solderless Breadboard 400 Points Prototyping Shield for Electronics Testig DIY

  • 400 Points Breadboard with 2 Positive & Negative Power Lines on both ends.Perfect for Arduino Shield Prototyping and Testing..
  • Insertion Wire Size is 21 to 26 AWG, 0.016 to 0.028 inches diameter (0.4 to 0.7mm diameter),works with dupont jumper wires kit..
  • White ABS body with black printed legend. Color legend on distribution strips..
  • With self-adhesive tape on the back, make it easy to stick on the Arduino Prototype Shield..
  • Good kits for Arduino breadboard kit proto shield and DIY projects..
Check Stock

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

  • This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
  • More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
  • 3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.
Check Stock

YUEONEWIN 130 Pcs Breadboard Jumper Wires Kit 4pcs 400 & 830 Points Solderless PCB Breadboards and 126 Pcs Flexible Bread Board Jumper Wire Set for Arduino Prototyping Circuit DIY Electronic Project

  • 【Package Included】Solderless Breadboard Kit includes 2pcs 400-point breadboard, 2pcs 830-point breadboard and 126 pcs flexible breadboard jumpers,....
  • 【Material】400 and 830 connection point breadboards are made of high-quality ABS plastic panels and high-grade tin-plated phosphor bronze contacts,....
  • 【Design】There are metal strips under the breadboard board to connect with the holes on the top. Note that the top row of holes and the bottom row....
  • 【Wide Applications】This breadboard jumper kit can use 20-29 Awg (0.3-0.8mm) wires to interconnect any components, ideal for setting up test....
  • 【Service Guarantee】If you have any questions about these solderless breadboard kits, please feel free to contact us and we will reply within 24....
Check Stock

Vilros Getting Started with MicroPython on Raspberry Pi Pico Kit

  • Vilros Getting Started With MicroPython on Raspberry Pi Pico Kit.
  • LEARN TO PROGRAM: 48 Page Full Color Guide features clear instructions with screenshots and covers: Getting to know your Pico, Programming with MicroPython, Physical computing, More Pico projects--Also Includes a Pin Reference Card for easy Pico Wiring.
  • CUSTOM PICO PARTS: Includes Battery Holder with Micro USB connector to power on the go, USB Cable to connect to a PC and program and a Panel to neatly hold the breadboard and battery holder for a neat and easy wiring experience.
  • STORE AND CARRY: Includes a Picoboat case to protect your pico when not in use and also includes a neoprene bag to store all the parts of the kit neatly.
  • HIGH QUALITY COMPONENTS: Includes 30 × Jumper wire variety --1 × Full Size (800 Hole) Solderless breadboard--12 × Assorted Color LEDs: ---5 × Push-button switches--10 × 330 Ω resistors--1 × Active piezoelectric buzzer--2 × 10 kΩ potentiometer--1 × HC-SR501 PIR sensor--1 × I2C 1602 LCD module--1 × WS2812B LED strip-- All Packed in a Clear hard plastic box for small part storage.
Check Stock

ELEGOO Electronic Fun Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer (235 Items) for Arduino, Respberry Pi

  • This kit has all the components you need to start your projects for Arduino or Raspberry Pi and other microcontrollers.
  • With a precision potentiometer, better quality, power supply module and breadboard.
Check Stock

MybotOnline 5 Sets Stepper Motor 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board

  • Stepper motor with a standard interface, motor diameter: 1.1", wire length: 9.05".
  • A, B, C, D four-phase LED indicates the status of stepper motor work.
  • Compatible with ArduinoIDE UNOR3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Gift: 1x 10-pin male to female multicolor breadboard jumper wires，each cable length: 7.87"(20 cm).
  • Packing in a box: 5 sets Uln2003 stepper motor + driver board + 10 pin jumper wire.
Check Stock

AEDIKO 840pcs Jumper Wire Kit 14 Values Breadboard Jumper Wires Kit 2-125mm Solderless Flexible Breadboard Connecting Line Cables

  • Wire Parameters: U Shape, 24 AWG, Male to Male.
  • Wire Length: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm.(14 Value 840pcs).
  • Easy To Use:Each Jumper Has Stripped Ends And Preformed Right-Angled Leads For Easy Insertion Into Your Breadboard..
  • Wide Application:Work Well With Any Breadboards, Prototyping, Prototype Circuits, LED Strip, Test Circuits ,Computers, Electronic....
  • Package Contents:All Jumper Wires are Packed in a Plastic Box, Keep Your Jumper Wire Kit Organized and Convenient to Manage..
Check Stock

TUOFENG 20awg Electronics Wire Colored Wire Kit 20 Gauge Flexible Silicone Wire(6 Different Colored 23 Feet spools)600V Stranded Wire Hook up Wire Kit

  • 20 Gauge silicone wire - super flexible 100 strands of 0.08 mm Tinned copper wire - Highly efficient - Super low impedance for a highly efficient connection.
  • High Temperature Resistant Silicone Wire.Temp: -60 degree celsius +200 degree celsius ,Low temperature resistance,in extreme cold -60 degree celsius.
  • Conductor: High-purity oxygen-free Tinned Copper,Nominal Voltage 600V.
  • Due to the Silicone insulation and fine stranded core, The wire is very flexible easy to strip and solders . Well suited for applications where the wire will be flexed, like test cables. Could be terminated with pins and heat shrink sleeves for breadboard jumper wires..
  • CERTIFICATION: UL (E355578), RoHS, TS/16949. COLORS AVAILABLE: Red, Yellow, White, Green, Blue, Black (23ft / 7M each color)..
Check Stock

WayinTop RPi GPIO Breakout Expansion Kit for Raspberry Pi 4B 3B+ 3B 2B B+, T-Type GPIO Expansion Adapter Board + 830 Tie Points Solderless Breadboard + 40pin GPIO Flat Ribbon Cable + 65pcs Jumper Wire

  • 【Updated Starter Kit for Raspberry Pi】This is a updated Assembled starter kit for for Raspberry Pi 4B/3B+/3B/2B/B+, including GPIO Adapter Board with Wiring Diagram Card, 40pin GPIO Rainbow Fat Cable, 830 Tie Points Solderless Breadboard and 65pcs Jumper Wire..
  • 【GPIO Adapter Board with Wiring Diagram Card】You can connect much version raspberry of the board to various sensors and electronic components with the GPIO extension board..
  • 【40pin GPIO Rainbow Fat Cable】IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable.
  • Material: High-quantity copper soft wire material for safe and durable.
  • Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests..
  • 【830 Tie Points Solderless Breadboard】made of high quality ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling, with self-adhesive tape on back and multiple links to buckle..
  • 【65pcs Flexible Jumper Cables】Flexible, durable, reusable, easy to connect and disconnect.
  • 4 Kinds of length: 12cm(49pcs), 16cm(8pcs), 20cm(4pcs), 24cm(4pcs).
  • these jumper cable wires can connect each other through the pin connection, do not need welding, can fit for fast circuit....
Check Stock

Antrader Breadboard Jumper Wires 40 Pin 10CM Female to Female for Raspberry Pi

  • Package: 1 piece of the 10cm 40pin female to female multicolored jumper wires cables..
  • Jumper wire length: 10cm/3.94 inch(F/ F).
  • Connectors: 40pin female to female header.
  • Compatible with 2.54mm spacing pin headers..
  • Made of high-grade copper wire material, safe and durable to use..
  • The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers..
  • Can be used for electronic project, genuine breadboard kit project, PCB project, PC motherboard, etc..
Check Stock