ReviewsBreaker Bar Used For

Park Tool SWB-15-3/8 Drive Breaker Bar,One Size,901920-01

  • The 15" SWB-15 is a forged steel breaker bar with a 3/8" square drive head that pivots 180º..
  • Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners..
Check Stock

BESTOOL Pro Series OTR Giant Hydraulic Tire Bead Breaker for 5 Piece Rims 25 in. to 51 in. with Pry Bar Bead Loosening Pockets, 10000PSI

  • 【PREMIUM QUALITY】 This bead breaker is built with the cast iron material combined with precision machining components, sturdy and durable.
  • the high-quality baking finish makes it rust-proof. It can break beads smoothly with the max pressure of 10,000 psi (700 bar).(NOTE : Without Air Hydraulic Pump!!!).
  • 【LARGE WORKING RANGE】 The working range of this tire bead breaker is up to 5" (12.7 cm), which can save the trouble of changing the hook when dealing with tires of general sizes. The more extended feet and claw grasp the tire firmly to avoid slipping off, labor-saving and time-saving..
  • 【CHROMIUM-PLATING PISTON ROD】 This hydraulic bead breaker comes with a piston rod designed with fine polishing and chromium-plating processing, which has good abrasiveness and anti-causticity. The superior quality high-pressure joint can be easily tightened by hand..
  • 【SELF-RETRACTING DESIGN】 The hydro-cylinder of this hydraulic breaker is equipped with a powerful spring and adopts the technology of self-retracting under the force of the spring, which dramatically simplifies the operation steps and improves the working efficiency..
  • 【WIDE APPLICATION】 This bead buster is widely used in the repair and replacement of tires for engineering vehicles, agricultu....
Check Stock

Truck Upfitters Surface Mounted 100A Circuit Breaker (12V-48V, 100 Amp) for DC Automotive and Marine/Boat use: Main Power Breaker, Audio, Winches, Solar, Lighting, Electric Motors & Other Accessories.

  • Each Circuit Breaker comes with two 4 AWG copper wire lugs with 1/4" holes, two 10mm heat shrink tubes (one red, one black), two 1" stainless steel self-tapping sheet metal hex-head screws with rubber padded metal washers, two rubber washers and 4 copper washers. The hardware is designed to allow the circuit breaker to be attached to a sheet metal surface, although wood screws (not included in this kit) can be used with the copper washers if necessary to attach to a wood or fiberglass substrate..
  • These circuit breakers are an excellent way to protect you car, truck, boat or RV's DC accessories in the event of a short circuited or overloaded condition. When tripped, this DC breaker will remove power to the circuit & place itself in a visibly noticeable "tripped" condition, but can easily be reset by manually flipping the red reset lever back into the dc circuit breaker housing. It is a resettable fuse that can also by manually "tripped" by depressing the red button on top of the breaker..
  • This 100 amp breaker is an auto or marine circuit breaker that can also be used as a power disconnect switch. It is an excellent solution for placing between a battery and 100 Amp Accessory, to use as an amp disconnect switch, as a main 100 amp marine circuit breaker, ....
Check Stock

Circuit Breaker Buss Bar Combing Terminal Block Pure Copper PVC for Schools Hospitals Hotels Home(6 way)

  • Applicable Circuit Breaker: The single row bus bar can be connected to C45 type, DZ47 type, IC65N type and other small circuit breaker air switches..
  • PVC Shell: The dustproof shell protects the internal aging, makes the busbar have a longer life, and has the characteristics of insulation, high temperature resistance, and not easy to break..
  • Wear Resistance: The precise production for durable use, will not cause serious wear and tear due to too many installations, and can no longer be re‑installed..
  • High Quality Material: Made of pure copper, with the features of high current carrying capacity, good conductivity, large overcurrent, convenient wiring and not easy to oxidize..
  • Wide Application: The busbar can be widely used in circuit breakers in enterprises, construction sites, schools, hospitals, hotels, homes and other places..
Check Stock

WSLHFEO 20 Amp Mini Breaker L

  • Circuit Break Protection:50 Amp Circuit breaker can protect your trolling motor from electrical damage, prevents excessive current, and stops power surges from damaging Amps. Manual Reset circuit breaker for choose and Compatible with all 12-48 V Systems..
  • Safety: 50 Amp Circuit breaker pass professional electrical performance test and aging test, the switch button has passed full inspection, the switch button is smooth, there is no stuck state, please rest assured to buy..
  • What in Package: 50 Amp breaker waterproof, accessories including wire lugs 2pcs and copper washer 4pcs, improve the conductivity..
  • Installation: Manual reset circuit creaker,no need to replace the inline fuse，can also be used as an on/off button switch for the battery. surface mount, mount on panel or firewall. water-resistant housing, protective stud insulator included splash & dustproof..
  • Application: The circuit breaker switch mainly used for car audio and amps protection and in trucks, boats, RV, marine, buses, etc.
  • also used in battery charges and DC sound system..
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

OTC 6599 Universal Fuel Sender Lock Tool

  • Universal design allows tool to fit fuel tank lock rings on Ford Chrysler and GM vehicles.
  • Tool easily removes and installs lock ring on the fuel tank when servicing the fuel pump or fuel sending unit.
  • Used with a 1/2" drive ratchet or breaker bar.
Check Stock

Capri Tools 21000 Honda Crank Pulley Removal Tool Black

  • Easily remove crank pulley bolts on Honda and Acura engines with this tool.
  • Hardened Chrome-Molybdenum steel is used to form a damage resistant body.
  • This professional grade tool is compatible with a 50 mm socket with a 1/2-inch drive breaker bar.
  • Tight hard-to-reach engine spaces are made easily accessible.
Check Stock

DYMO Rhino 4200 Label Maker (1801611)

  • FAST TYPING: Easily enter text with a familiar computer-style, QWERTY, keyboard.
  • TIME-SAVING FEATURES: Uses convenient one-touch “Hot Keys” to access shortcuts for creating and formatting wire/cable wraps, flags, Code 39 and Code 128 bar codes, fixed-length, general, and breaker labels.
  • CONVENIENT MEMORY RECALL: Quickly access your most commonly used labels, symbols and terms with the “Favorites” key.
  • CUSTOMIZABLE: Avoid repeated steps with the “Custom” key – customize and save settings for individual label formats.
  • USE WITH AUTHENTIC DYMO LABELS: Uses DYMO Industrial labels 1/4.
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

Square D - QO124L125PGC QO Load Center with Cover 125-Amp Convertible Main Lugs 1-Phase 24-Space 34-Circuit Ground Bar

  • Engineered for a quick Plug-on Neutral breaker connection on every circuit, fewer connections, faster installation, no pigtails frees up gutter space.
  • Includes an indoor cover, PK15GTA ground bar and is convertible to a main breaker load center with a QOM1 main breaker (sold separately).
  • Accommodates plug-on secondary surge arrestor (sold separately).
  • Overhead/underground feed simply by rotating the device before installing.
  • Rated 120/240 VAC and 65,000 AIR short circuit current rating.
Check Stock