ReviewsBreast Card Engraving Machine

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....
Check Stock

Longer RAY5 Laser Engraver 130W, Higher Accuracy Laser Engraver 20W Output Power, 3.5"Touch Screen APP Offline Control, DIY Engraver Tool for Metal/Glass/Wood, Cutting Area 14.7"x14.7"

  • ...r enhancement technology and enhance the cutting capacity of this machine. It can cut 0.59"/15mm pine wood and 0.31"/8mm acrylic in one pass, 25mm wood and 35mm acrylic multiple passes, and cut 0.002"/0.05mm stainless steel..
  • 【More detailed and Multi-Color Engraving】Longer RAY5 20W laser engraver with a newly upgraded 32 bits chipsets motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm ultra-fine laser focus area achieves a finer engraving result and a higher contrast effect. And an air-assisted interface is reserved, which can be easily matched with various air pumps, and more clean surfaces..
  • 【3.5" color Touchscreen & 4 Connection Methods】The Longer RAY5 laser cutter has a built-in 3.5-inch color touchscreen with a user-friendly interface. You can directly operate the machine through the touchscreen, such as checking the engraving progress, adjusting the engraving speed, or other operations. Particularly totally User-Friendly Laser Engraver, this laser engraver has 4 connection modes: ①SD Card Connection ②USB Connection ③APP Connection ④Wi-Fi Connection.
Check Stock

ATOMSTACK Laser Engraver Cutter A5 M50 by Alxeoider, Optical Power 5.5W Laser Engraver Machine, Diode 40w Laser Cutting Machine with 50mm Focal Length, Multi-Lens Beam for Wood/Acrylic/Metal Carving

  • ✅【ATOMSTACK A5 M50】 Newly upgraded laser head, cost-effective laser engraving machine.
  • ✅【Fixed-focus Laser + Compressed Laser】 The upgraded high-performance fixed-focus laser of laser engraving machine can engrave without focal length adjustment, more stable than zoom laser. The new laser focal spot area is 0.08 x 0.08mm, 50% smaller than other ordinary lasers, which can take into account both precision engraving and high-energy cutting. Adopts 4-fold lens group collimation focusing technology, the optical power of laser cutter and engraver machine is 5-5.5W, can easily cut 15mm thick wood board, 15mm black acrylic, etc., which can reach 100W CO₂ laser engraving machine effect..
  • ✅【Eye Protection Flame Retardant Filter Panorama Glass】 Flame retardant filter panorama glass can filter 97% of ultraviolet light, which has a good protection effect on your eyes. You and people around you can also clearly view the laser engraving without wearing protective goggles, reducing the cost of your goggles and the inconvenience of wearing goggles. At the same time, it can prevent your pet from going out curiously to capture the high-temperature laser point, whil....
Check Stock

uxcell Blank Metal Card 100x50x0.4mm Brushed 201 Stainless Steel Plate for DIY Laser Printing Engraving Silver Tone 10 Pcs

  • ... Feature] - Stainless steel plate is not easy to fold, bend, fade and age. The decoration is better than other ordinary metal plates. Besides, with R2 chamfer corners design..
  • [Easy to Use] - Fast production cycle, simple to custom different nameplates if you have your own engraving machine. Different data, logo, two-dimensional codes and bar codes can show on each blank by your unique design..
  • [Wide Applications] - Commonly used for: Equipment nameplates, logo plates, door plates, trophy plaques, desk tags, label tags, serial number tags, metal signs and many other customized needs. Suitable for use with: Laser engraving, screen printing, stamping, and other engraving methods..
  • [Notice] - Only one side is covered with a protective film(Remove it when using).
  • The other side is not covered with a protective film, which probably left slight abrasion during transportation(This side does not recommend printing and engraving words)..
Check Stock

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

CNCTOPBAOS 3 Axis 1310 CNC Router Kit for Metal Cutting Carving,GRBL Offline Controller,USB Mini Desktop Milling Machine for Aluminum Wood Copper PCB Engraving Machine

  • Please let us know if you need any help about the machine.AND please let us know if you fail to install the CH340 driver on Windows 10..
  • ♞【Wide Application】Suitable for carve/engrave plastic, wood, acrylic, pvc, pcb,bamboo,MDF and silimar materials engraving/cutting,as well as copper, aluminum, and other kinds of soft metal materials..
  • ♞【CNC 1310】 Working area:126mm*88mm*38mm / Machine Dimension: 281mm*281mm*287.5mm /Control Software: Grblcontrol / Lite.fire/Benbox. / Power Supply: DC24V adapter (input: 110VAC-240VAC) / Spindle Motor: 775 spindle motor (12-36V), 24V 8000r/min / Spindle Chuck: ER11 / Stepper Motor: 2-Phase 4-Wire Stepper Motors (1.3A 0.25N.m).
  • ♞【Offline Controller】Main advantages: 1,can operate without connect the computer.
  • 2,Support SD card and TF card at the same time, standard capacity 1G. can write into the root directory G-code files or NC file.
  • Support Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle..
Check Stock

Comgrow ROBO Table CNC Router Machine with GRBL Offline Control,3-Axis Engraving Milling Machine 300x180x45mm Working Area for Carving Cutting Plastic Acrylic PCB PVC Wood Aluminum brass

  • 【Upgrade Comgrow CNC ROBO 】Comgrow cnc router 3 Axis 42 stepper motor are X/Y/Z Axis power, the axis moves more smoothly. 775 spindle motor up to 10000r/min. and comes with short circuit protection, no need to worry about module damage..
  • 【CUSTOMISED SETTINGS】Metal CNC machine cutter Full Aluminum Alloy tray Working area: 30x18x4.5CM. Meets most of the engraving needs.
  • 【AUTOMATIC TOOL-SETTING】CNC Router for metal aluminum copper can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors During the engraving process, there is no need to manually adjust the height of the Z axis to make the drill touch the surface of the engraved object.
  • 【 a wide range of projects and materials】the comgrow cnc router machine Capable of cutting and engraving all types of plastics, soft aluminum, Copper, woods, acrylics, PVCs, PCBs and MDF, the setting parameters of different materials can refer to the product page below middle"".
  • 【more Simply Assemble and Use】This table cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and SD Card of all the files. Please let us know if you need any help ..
Check Stock

HTPOW Laser Engraver, Laser CNC Carving Machine , Large Area Printer cutter engraver 16.1'x14.5', Support Win/MAC/OS/Mobile WiFi Connection, Apply to Wood, Bamboo, Acrylic, Leather (20W)

  • 【Innovative Eye Protection Design】HTPOW l wood cutter machine,The wood engraver protective cover perfectly protect your eyes,filter UV light for 97%. You can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles, prevent pets and children from grabbing the laser spot..
  • 【High-Precision & Easy Installation】DIY laser cutter engraver machine adopts Aluminum alloy guide rails and rubber pulleys, smooth running, precise engraving, high-quality laser, precise beam control, engraving accuracy of 0.01mm.
  • engraving area of 16.14×14.57''.The entire engraving machine adopts a modular design, replace and update cnc laser cutter engraver machine parts. And the assembly can generally be completed within 10-20 minutes..
  • 【Upgraded Auto Focus Function:】 wood laser cutter engraver machine no need to adjust the focus before engraving.
  • the new metal laser focal spot is 50% smaller than other wood engraving machine , new wood carving combines precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
  • 【Wide compatibility & Precise scale lines axis】There are precise scale lines on the X-axis and Y-axis to facilitate....
Check Stock

4040 CNC Engraving Machine CNC Router Machine Kit Pro Milling Machine for Wood Metal Acrylic MDF Carving Arts Crafts

  • ✅【Premium Material】 The engraving machine with an aluminum frame and wood panel workbench is corrosion-resistant and strong, having a long service life. .
  • ✅【High Efficiency & Accuracy】 The engraving machine with the industrial-grade chip and 75W high-power spindle motor take a very short time to complete the engraving, and have precise calculations and can achieve precise engraving of ≤ 0.05mm/0.001inch..
  • ✅【Wide Application】 With an effective engraving area of 400*400*83mm, the machine can easily accommodate most projects. Suitable for industrial technology, advertising design, art, educational programs, amateurs, architectural models, printed circuit boards, etc. It is suitable for engraving plastic and wood..
  • ✅【Stable Operation】 The spindle motor with an air cooling system cools the machine, stable, reliable, and durable. The 42 two-phase stepper motor has good control performance..
  • ✅【DIY】 The mini DIY engraving machine is easy to operate, and can be used to make gifts for your friends and exercise your hands-on skills. It can make you experience the joy of DIY by completing your sculptures..
Check Stock

Comgrow 2 in 1 ROBO CNC 3018 5000MW Laser Engraving Module Compressed Spot,GRBL Control 3 Axis CNC Router Machine Kit with Offline Controller,End Mill Bits,for Wood Glass Mirror Stainless Steel

  • 【PRE-ASSEMBLED】Comgrow ROBO CNC 5W Laser Engraving for wood stainless steel stone glass ceramics is very easy to assemble and use. JUST DO THE UNBOXING AND LOCK 6 SCREWS when receive it, then, step on your creating journey..
  • 【ULTRA-FINE COMPRESSION LASER】The laser power for this CNC laser and router machine is 5W, the high-power engraving speed is faster, and the accuracy is higher. The ultra-fine laser focus area is reduced to 0.08mm^2. The high-density laser can easily cut 4mm thick wood and black. Acrylic.
  • can directly engrave smooth stainless steel metal and ceramics..
  • 【AUTOMATIC TOOL-SETTING】Comgrow ROBO CNC router pre assembled machine can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors.
  • 【OFFLINE CONTROLLER】The Comgrow ROBO CNC router Laser machine can work without pc. ROBO supports operating without PC, THE CNC ROUTER IS EQUIPPED WITH A OFFLINE MODULE. Just transfer files to a SD card, you may begin creating and no PC needed..
  • 【COMPREHENSIVE AFTER-SALE SERVICE】 Comgrow ROBO CNC Engraving machine for metal stone wood glass Stainless Steel offer exhaustive after-sale service, you can search "Comgrow" through Facebook, Youtube, Twitter, Instagram and google and will easily find out our Comgr....
Check Stock

ATOMSTACK S20 PRO Laser Engraver,130W Laser Engraving Cutting Machine Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot, Laser Cutter and Engraver Machine Metal Steel Golden Gray

  • More Powerful Engraving: ATOMSTACK S20 PRO is the first 130W semiconductor laser engraving machine. It uses the newest generation of four 6W laser coupling technology to produce the output power soars to 20W. It can cut 15mm thick tung wood board and 8mm thick black acrylic board at one pass and easily cut more than 40 kinds of materials such as 0.05mm thick stainless steel board..
  • More Precise Engraving: ATOMSTACK laser engraver with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area MAKEs the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more deliCATe and natural in the overlay of black and white..
  • More IntelLIGEnt Engraving: We have developed an ATOMSTACK APP to connect to the S20 pro laser engraving machine, supporting Android and Apple mobile phone systems. At the same time, It is equipped with a controller and emergency stop button, so that completely offline engraving can be achieved. You can do your engraving work smoothly and safely even without network environment or computer..
  • More Clean Engraving: The S20 PRO laser engraver is equipped with an upgraded F30 pro air assist kit, which have dual built-in....
Check Stock