ReviewsBroken Tap Drill Bits

IRWIN Tap And Die Set with Drill Bits Machine Screw/SAE/Metric 117-Piece 26377

  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair.
  • Constructed of high carbon steel for durability.
  • Puts commonly needed taps, dies, drill bits, and extractors at your fingertips.
  • Perfect set for the professional craftsman.
  • Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.
Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
Check Stock

XJX Screw-Extractor Set | Easy Out Bolt Extractor Set | Multispline and Spiral Extractor Set | Perfect for Stripped Screws, Studs, Fittings, and Lugs, Left-Hand Drill Bits | 1/8" to 13/32"（25-Piece）

  • ... 【WIDELY USED】: This screw remover set contains 3 models of parts, each with clear specifications printed on the part. Including SAE sizes, such as: 1/8",5/16",3/8",7/16",1/4" etc. Suitable for power drills, flat or allen wrenches, tap adapters. Ideal for removing broken screws, bolts, studs, fittings, threaded pipes and pins..
Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

  • ✅【High-quality materials】SNUSIM combination drill tap bit is made of high quality High-Speed Steel 4341 and steel 6542. Strong hardness and good durability.The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • ✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
  • ✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
  • ✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting w....
Check Stock

Inch Metric Tap Drill Sizes and Decimal Equivalents Magnetic Chart for Garage CNC Shop

  • Complete full chart of drill sizes with decimal equivalents and millimeters + EXCLUSIVE CALCULATIONS OF THE LEAD-IN COUNTERSINK DIAMETER AND ABSOLUTE DEPTH OF THE COUNTERSINK BITS!.
  • Tap drill sizes for Inch Tap Sizes from 0-80 to 2-4 1/2 , UNC and UNF..
  • Tap drill sizes for Metric Tap Sizes from 1.6x0.35 to 39x3..
  • Size: 11” x 8.5”, completely Waterproof, Strong Magnetic backing, Rounded corners.
Check Stock

6Pcs 1/4" Titanium Coated Drill Bits, HSS M3 M4 M5 M6 M8 M10 Metric Thread Tap Bits

  • TITANIUM COMBINATION DRILL TAPS: These HSS drill and tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Drill tap bits increase efficiency of operation by allowing for drilling and tapping to be accomplished in a single pass..
  • THREAD AND PITCH SIZE: M3, M4, M5, M6, M8, M10/0.7mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm, with 1/4inch hex shank..
  • USER FRIENDLY: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks..
  • APPLICATION: They are used on a machine to do the tapping, such as a lathe. Machine tapping with these taps is faster, and generally more accurate because human error is eliminated..
  • GUARANTEE: If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..
Check Stock

ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit – Drill Bits, Extractor Pins, Drilling Guides, Extractor Nuts Set

  • EFFORTLESS SCREW & BOLT EXTRACTION: Use the ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit to remove broken fasteners and studs from regular and even recessed bolts, nuts, and screws without breaking or jamming.
  • Take out any fastener with thread sizes from 3/16-inch to 9/16-inch (5mm to 16mm).
  • EASY TO USE: If broken bolt is either above or below the surface, use drill guides.
  • Extractors have flutes/ridges that will grip broken bolt when driven into newly drilled hole.
  • The drive nuts fit tightly over extractor to provide an easy and non-damaging way to turn extractor.
  • Clamp in a vise grip and twist broken bolt off extractor once removed.
  • BUILT TO LAST: For ultimate strength and highest torque without expansion, the drill bits constructed from #4241 high-speed steel (HSS) with polished finish, extractor pins constructed from #6150 chrome-vanadium (CR-V) steel with polished finish, drilling guides constructed from #45 steel with black oxide finish, extractor nuts constructed from alloy steel with sandblasted finish.
  • EASY STORAGE: Heavy-duty 8.6” x 1.6” x 5.6” inch (21.8cm x 4.1cm x 14.2cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • Storage case includes sizing labels for each co....
Check Stock

REXBETI 24 Piece Torx Head Screwdriver Bit Set, Magnetic 1/4 Inch Hex Shank S2 Steel Tamper Resistant Star Bits Set, 1\ and 2.3\ Long Drill Bit

  • Wide Application - The cross headed screwdriver bits is suitable for general sizes and all kinds of damaged bits. The magnetic Screwdriver bits are compatible with electric screwdrivers, manual screwdrivers, T-handle 1/4" driver screwdrivers, impact drivers and more. The anti-slip hex bit set remove broken screws or drill holes in one step..
  • Packaging Included - The electric anti slip screwdriver tool include 6 PH2 screwdriver drill bit heads in size 50mm, 65mm, 70mm, 90mm, 127mm, 150mm. and 1PCS Magnetizer, this Screwdriver Bits will meet your different needs..
Check Stock

szgate 5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS MetricImperial Plug Drill Bits Hand Tools 6-32NC, 6-32NC (3.5mm)

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC（Golden）

  • Complete Set: Set of 6 pcs drill bit tool, 6 different size tap drill bit, M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch, a variety of specifications to choose from, convenient for work..
  • 3-in-1 Combination Tap: Drilling - tapping - chamfering, three-in-one composite tap with hexagonal handle can be achieved in one step without frequent replacement, and the operation is more convenient and faster, high processing efficiency..
  • Professional Tools: The standard 1/4 inch hex shank can be installed on ordinary electric drills and bench drills, with strong locking force and not easy to slip. The pointed tap can be tapped to the bottom of the blind hole, large helix angle, better chip removal performance.
  • Premium Material: Our tapping bits are made of high-speed steel with titanium coating. They have high hardness, sharpness and wear resistance, high heat resistance and strong cutting performance. They are a good helper for cutting high-hardness materials..
  • Widely Application: Our tap drill bits have strong cutting toughness, suitable for various cutting series, processing range: copper, aluminum, brass, iron plate, steel, metal sheet, plastic and other metals..
Check Stock