ReviewsBroken Tap Removal Equipment

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank

  • For removing Machine Screws and Broken Hand Taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Walton 18013 13 Piece Multi Flute Tap Extractor Set With Square Shank

  • For removing Machine Screws and Broken Hand Taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Acrux7 14mmx1.5 HSS Right Hand Thread Tap, Metric Thread Tap, Thread Milling Tap M14 X 1.5mm Pitch

  • 【MATERIAL】-Made of made of high speed steel and are good for most general purpose applications,offering a combination of hardness and toughness for wear resistance.
  • Standard thread design,clear and tidy,provide rapid chip removal for efficient threading.
  • 【FEATURE】-Straight flute taps are used for through hole and shallow blind hole tapping.
  • Adjustable forward and reverse,ratchet rotation,compact and convenient.
  • 【NOTE】-Before tapping,confirm whether the diameter of the round hole is appropriate.
  • If the hole is too small for tapping,the tap will wear out more unnecessary,which will increase the risk of tap breakage.
  • 【APPLICATION】-The taps are used formanual equipment or special processing consoles,such as tapping machines,drill-in-one bench drills etc.
  • With this tap,you can finish tapping on stainless steel,iron,aluminum,copper,general steel and other materials.
Check Stock

Yakamoz 9pcs Machine Screw Tap Set Titanium Spiral Flute Drill Taps Metric M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Thread Tapping Tool

  • Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12.
  • Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading..
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap..
  • Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life..
  • High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material).
Check Stock

MINI EDM-2000B Broken Tap Remover,Spark Erosion,Broken Tap Extractor Portable EDM Drilling Machine Remover Broken Drill,Bolt,Reamer.Tap Disintegrator,110V,2000W,Depth Setting

  • [Power: 110V/220V, 50/60HZ]Immediate Use Portable EDM upon Arrival.The Working Liquid is Ordinary Tap Water..
  • [Input power: 300W-2000W]Fast remove M2-M36(5/64'' to 1-27/64'') Broken Taps, Drills, Studs,Bolts, Reamers without Damaging to the Workpiece..
  • [Easy Operation] One Key Start/Stop, Simply Operation,Auto Feed Stepper Motor..
  • [Applications Widely] Widely used by Machinery Repair.Magnetic Base and Rotating Workhead could Process Large or Heavy Equipment Repair, auto truck....
  • [Economical And Convenient]The Working Liquid is Ordinary Tap Water.
Check Stock

Walton 10124 #12, 4 Flute Tap Extractor With Square Shank

  • For helical coil wire screw thread insert taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Straight Fluted Screw Extractor Set 5 Pcs M4-M18 | 3/16-Inch to 5/8-Inch Easy Out Bolt Extractor Set for Broken Bolt Thread Repair Carbon Stee

  • 1.STRAIGHT FLUTED SQUARE BROKEN SCREW EXTRACTOR：Solve the problem that the broken screw cannot be removed. 5 models can deal with metric M4-18 or....
  • 2.SCREW RANGE USE:NO.1 M4-M6~2.2-4.6MM Drill Bits.
  • 3.SQUARE CLAMPING:The tail is square, which is convenient for the tap to clamp and manually exit the screw..
  • 4.STRAIGHT FLUTED: Directly and quickly jam the inside of the screw after drilling to facilitate the removal of the screw..
  • 5.THE SCREW TYPE IS APPLICABLE: Phillips screw, internal hexagon screw, external hexagon stud, flat screw, etc., as long as the screw thread diameter....
Check Stock

NutriChef - Pressurized Growler Tap System - Stainless Steel Mini Keg Dispenser Portable Kegerator Kit - Co2 Pressure Regulator Keeps Carbonation for Craft Beer, Draft and Homebrew - PKBRTP50 (64oz)

  • NEVER FLAT CRAFT BEER: A traditional growler will let beer go flat after the first pour. PKBRTP50 will keep beer vacuum pressured and fresh for up to 2 months. Perfect for any homebrew or craft draught beer kegging equipment enthusiast.
  • WORKS WITH DISPOSABLE CO2: Screw small threaded 16g CO2 cartridges (any brand) into the regulator to supply pressurized carbonation to your keg system. Each cartridge will pump around 128oz of beer before depleting.
  • UPGRADED ADJUSTABLE REGULATOR: Monitor the mini keg growler’s current PSI from the regulator gauge and fine tune pressure by rotating the adjustment knob to enjoy a perfect head on every beer. Add the insulator sleeve to keep beer cold.
  • HEAVY DUTY STAINLESS STEEL: Each of the accessories in the tap dispenser kit is constructed with S/S 304 stainless steel. Tap faucet handle is just pouring draft brew from a kegerator. Pressure release valve allows safe removal of the tap hardware.
  • 64oz TANK SIZE: Barrel is the same volume as traditional growlers and is laser marked at the fill level. Includes metal screw on lid for easy portable transportation and storage. 13.4” height fits in your home fridge.
Check Stock

NutriChef Pressurized Growler Tap System - Stainless Steel Mini Keg Dispenser Portable Kegerator Kit - Co2 Pressure Regulator Keeps Carbonation for Craft Beer, Draft and Homebrew - PKBRTP100.5 (128oz)

  • NEVER FLAT CRAFT BEER: A traditional growler will let beer go flat after the first pour. PKBRTP100 will keep beer vacuum pressured and fresh for up to 2 months. Perfect for any homebrew or craft draught beer kegging equipment enthusiast.
  • WORKS W/ DISPOSABLE CO2: Not included – Each cartridge will pump around 128oz of beer before depleting Co2 cartridge. Screw universal threaded 16g CO2 gas cartridges (any brand) into the regulator to supply pressurized carbonation to your keg system.
  • UPGRADED ADJUSTABLE REGULATOR: Monitor the mini keg growler’s current PSI from the regulator gauge and fine tune pressure by rotating the adjustment knob to enjoy a perfect head on every beer. Add the insulator sleeve to keep beer cold.
  • HEAVY DUTY STAINLESS STEEL: Each of the accessories in the tap dispenser kit is constructed with S/S 304 stainless steel. Tap faucet handle is just pouring draft brew from a kegerator. Pressure release valve allows safe removal of the tap hardware.
  • 128oz TANK SIZE: Barrel is the same volume as traditional growlers and is laser marked at the fill level. Includes metal screw on lid for easy portable transportation and storage. Fits in your home fridge.
Check Stock

OCGIG 11 PCS Damaged Broken Screw Extractor Drill Bit Bolt Stud Remover Tool Kit Set

  • Made from Chrome vanadium steel, High hardness.
  • Drill bits' diameters and recommended extract diameters of broken screws are etched on case.
  • Aggressive left handed(extractors) and righted handed(drill bits) spiral flute design for extra gripping power.
  • Ideal to remove damaged, rusted or stripped screws, studs, bolts, fastener, metal water tap and water tube, etc.
  • Note:First drill a dragon on the broken screw with an electric drill, then gently tap the extractor into the hole and use a wrench to rotate counterclockwise to take it out.
Check Stock

NEIKO 04204A Hex Head Multi-Spline Screw and Bolt Extractor Set | 25 Piece Easy Out Screw Extraction | Broken Bolt remover | 1/8” to 7/8” in 1/32” Increment | Cr-Mo | Stripped Fastener Tool

  • For helical coil wire screw thread insert taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock