ReviewsBroken Tap Retrieve Kits

Bright Starts Roll & Glow Monkey Crawling Baby Toy with Lights and Sounds for 6 Months and up

  • Ready, set, roll! A high speed chase awaits you and baby.
  • Get baby moving with chase-and-retrieve toy.
Check Stock

5/8-11 Tap And Die Set, UNC Right Hand Machine Tap and Round Die (5/8-11 UNC)

  • 【Round Die】: Not easily broken tooth chip fast, abrasion resistance and long service life..
  • 【Tap】 : debris rapidly discharged in the tank. No blocking, fast efficiency and high efficiency.
  • 【Characteristics】 : Heat treated and tempered for file hard threads and a long, useful life.
  • 【You will Get】 : 1x 5/8-11 TAP & 5/8-11 DIE.
Check Stock

FANOVO R134A A/C Refrigerant Freon Charge Hose with Gauge Set BPV31 Bullet Piercing Tap Valve Kits R134a Can to R12/R22 Port AC 1/2 Replace Universal Retrofit Valve Kit for AC/HVAC System (Gauge A)

  • ...L: Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use.both of the kit are made of corrosion-resistant metal that won't wear out or rust over time, and anti-leaking design that will be safer for you.
  • BULLET PIERCING VALVE KITS:BPV-31 Refrigerator Tap Valve Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31,A practical kit and convenient for you to use,Each kit including 1 piercing valve, 1 hex key, 2 adapters.
  • AC U CHARGE HOSE: R134A charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is up to 350PSI. Total length is 19", ideal for easy to reach AC suction service port, for example the AC connector is right on top of your engine compartment.
  • EASY TO INSTALL: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refrigerant.
Check Stock

TEMO 5 pc Heavy Duty Screw Extractor Kit Damage Broken Bolt Removal Tool Set

  • 5pc heavy duty extractors to remove damaged screw or bolt. Extractors are made of high carbon alloy tempered steel. Hardend for long life..
  • SIZES: #1, #2, #3, #4, & #5. EXTRACT A WIDE VARIETY OF SCREWS FROM 1/8" (3.175mm)-3/4" (19.05mm) IN WIDTH.
  • VERY EASY TO USE. REVERSE THREAD LOCKS ON AND BACKS OUT BROKEN STUDS.
  • Plastic storage case included. | Direction: STEP 1. PRE-DRILL THE CENTER OF THE BROKEN BOLT. STEP 2. INSERT SCREW EXTRACTOR. STEP 3. WHILE APPLYING DOWNWARD PRESSURE TURN EXTRACTOR LEFT WITH A TAP WRENCH, IF YOU DON'T HAVE A TAP WRENCH, A STANDARD VISE-GRIP CHANNEL LOCK WILL ALSO WORK..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Patioer R134A Refrigerant Charging Hose Gauge, Refrigerant Recharge Hose Kit with 3 Pack BPV-31 Bullet Piercing Tap Valve Kit for Car AC Air Conditioning Refrigerant Charging Can to R-12/R-22 Port

  • PACKAGE INCLUDES 5 PACKS: 3 x BPV-31 bullet piercing tap valve kits, each one contains 1 piercing valve, 1 hex key and 2 adapters.
  • 1x R134A U-charge hose with gauge and can tap.
  • PREMIUM MATERIAL: Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use..
  • R134A CHARGING HOSE: 15.3inch/39cm long, with R-134a can connect R-12 / R-22 service port, 1/2" end port fits for R12, R22, R502 fittings. And the gauge has scale readings for R134, R12, and R22. 90-degree push and lock coupler can auto shut off..
  • EASY TO INSTALL: BPV-31 bullet piercing tap valve kits are equipped with hexagonal wrench of suitable size, which is more convenient to install. Use the retrofit valve to attach the gauge with bullet piercing tap valve..
  • UNIVERSAL RETROFIT VALVE:  Retrofit valve converts from R-12 to R-134a. Fit for 7/16 inch low side port.
  • Suit for vehicles pre-1994, comes with R-134a refill fittings. Replace AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes..
Check Stock

4 1/4-20 Thinwall Thread Repair Inserts

  • Thread repair kit containing drill, tap, installation tool, tang break tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Mudder 5 Pieces BPV31 Piercing Tap Valve Kits U-Charging Hose Refrigerant Can Tap with Gauge R134a Can Connect to R12/ R22 Port AC 1/2 and Universal Retrofit Valve with Dust Cap

  • Package content: 3 pieces BPV-31 piercing tap valve kits (each kit contains 1 piercing valve, 1 hex key and 2 adapters), including R134a u-charge hose....
  • Easy to install: our BPV-31 piercing tap valve kits come in compact design that only requires a 2-inch clearance area for installation and use, and....
  • R134a Charging hose with gauge : 24 inch hose with R-134a can, it is a good air conditioning conversion adapter kit, it's completely applied to....
  • Replace model of BPV-31 piercing tap valve: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • Compatible with 1/4 inch, 5/16 inch, 3/8 inch....
  • Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port.
Check Stock

Tap Extractor Set Tap Extractors Broken Tap Extractor Steel Broken Head Taps Remover Stripped Screw Tap Extractor Set, for Industrial Screw/Bolt Removal/Everyday Home Repair Work(6 Pcs)

  • Made of superior high speed steel, high hardness and anti-corrosion..
  • Each tap extractor is specifically engineered for speedy grab-it and easy out broken screw taps..
  • Works for removing stripped, rusted, broken, or corroded screws and bolts..
  • Every tap extractor goes through rigorous quality testing, durable to use..
  • Suitable for industrial screw and bolt removal and for everyday home repair work..
Check Stock

Powercoil 3534-3/4K UNF 3/4-16 Thread Repair Kit (1 Kitper Pack)

  • Thread repair kit containing, tap, installation tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Sawyer Products SP134 TAP Water Filtration System, Fits Faucets & Hose Bibs, Blue (one Size)

  • Makes bacteria contaminated tap water potable.
  • Ideal for use in rural locations, emergency kits, boil alerts, at campgrounds, festivals, events, in RVs, and for travel.
  • Filter up to 500 gallons of water per day.
  • reusable high-performance 0.1 micron absolute inline filter fits taps 17mm to 20mm (11/16" to 3/4").
  • Removes 99.99999% of all bacteria (salmonella, cholera, and E. coli).
  • removes 99.9999% of all protozoa (such as giardia and cryptosporidium).
  • TAP adapter attaches directly to other Sawyer filters such as MINI, Dual Threaded MINI, Micro Squeeze, and Squeeze Water filter (not included).
  • Includes: TAP filter, backwash adapter, threaded spigot adapter, dual threaded adapter, tap gauge, extension hose for use in a shallow sink.
Check Stock

Walton Tools 18001 Tap Extractor Set Black

  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely..
Check Stock