ReviewsBronze Brazing Rods

RBCuZn-C - LFB Bare Bronze Brazing Rod - 36 x 1/8 1 Lb

LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.

Check Stock

Hot Max 24000 Brazing Flux Powder 8-Ounce

For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze.
This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch.
Active Temperature Range: 1400 to 2200 F (760 to 1205 C).
Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards.
Brazing Flux Powder comes in 8-Ounce container, Made in the USA.

Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
Copper (Cu): Rest. For the best results..
Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
Service: Fox Alloy Time-proven formulation.
A team of experienced welding engineers ready to answer all your welding questions.

Check Stock

Goss KA-725-M12P Welding and Brazing HVAC Torch Tool Kit with Stand for \MC\ Acetylene Tanks

...des enough range for working around, the included handy clip helps to hang the gas cylinder to any convenient places, gives you more move freedoms and working safety Patented Super Swirl flame tip and combustion system are specially designed to provide powerful turbo cyclone flame, resists flame blowout and reduces brazing time by 30%. Improve capacity to burn medium to relatively large copper or other metal pipes..
Ergonomically designed handle installed with build-in trigger start system to make it super easy to ignite the flame. Brass constructed threading regulator assure durability and reliability, pressure regulated for consistent performance even when tiled or momentarily inverted. adjustable flame control knob can easily sized flame for different applications.
Added 15% Silver into Phos-Copper brazing rods.A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The temperature at which it melts from a solid to a liquid is 1472°F..
Each 0.5 lb tube contains 19 sticks of 14" brazing rods. Significantly lower melting point:A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The melting temperature from solid to liquid is 1472°F..
Enhanced metallicity: The addition of silver will improve t....

Check Stock

Aufhauser SilverAlloy 45% Ag BAg-5 18 Flux Coated Silver Solder Brazing Rods 3 Sticks

Fluxed coated Cadmium-free 45% Silver brazing rods. 1/16" Core (3 Sticks).
For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum..
For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron..

Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..

Check Stock

Aufhauser SilverAlloy 56% Ag BAg-7 1/16 x 18 Flux Coated Silver Solder Brazing Rods 3 Sticks

Fluxed coated 56% Silver brazing rods, 1/16" Core. (3 Sticks).
For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum..
For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron..
Meets AWS A5.8 BAg-7. AMS 4763, QQB-654A Class BAg-7.

Check Stock

Permatex 14600 Cold Weld Bonding Compound, Two 1 oz. Tubes , Black

15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing.
Repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper.
can be drilled, tapped, threaded, filed, sanded and painted once cured.
resists most automotive, shop and cleaning fluids.
Temperature Range: up to 300°F intermittent.
Suggested Applications: Aluminum, steel, brass, bronze, castings and stampings.

Check Stock

100 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks

NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to....
HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high....
WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and....
AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..

Check Stock

40 Pcs Brazing Rods Solid Brass Rods Round Brass Stock Pin Brass Brazing Rods Brass Knife Pins Brass Bar Stock for DIY Craft Drift Punches Knife Handle Lathe 2 mm in Diameter 9.85 Inches in Length

Sufficient Quantity to Use: the package comes with 40 pieces of brass rods for knife handles, enough to satisfy your crafting or repairing demands, bringing you much convenience.
Appropriate Size for Processing: designed with a length of approx. 25 cm/ 9.85 inches and a diameter of approx. 2 mm/ 0.08 inches, the knife making handle pins are suitable for you to grip, store and carry around.
Easy for Welding: the brazing rod is an ideal material for you to do welding work, such as sculpture welding, model welding, circuit board welding and so on, whose melting point is 2190 degrees Fahrenheit, serving as a nice helper for you.
Satisfactory Practicality in Daily Life: there are multiple ways for you to apply the brass rods, for example, you can use them to embellish your model planes, model boats, wood crafts, knife handles and more, to make them full of your own style.
Reliable Workmanship for Lasting Service: mainly made of quality brass, the brass brazing rods are compact and stable in structure, with smooth surfaces and edges, not easy to deform or rust, able to stay vivid for a long time.

Check Stock

50 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks

NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to use..
HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity..
WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals..
AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..

Check Stock