ReviewsBudget Router Table

Router Table Spline Jig – Router Jigs and Templates for Small Boxes, Frames – Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot

  • Router Table Corner Spline Jig: Dress up your mitered corner joint and add strength too, with the Rockler router table spline jig! Fits standard 3/8'' x 3/4'' miter slot..
  • Holds Your Workpiece: This clever router jig locks into a standard router table miter slot. The splining jig features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit..
  • Ideal For? This box joint jig for the table saw is ideal for use with smaller boxes and frames, making it easy to add a wide variety of strong, beautiful splines to the corners..
  • Adjustable Fences: The adjustable router table woodworking fences act as stops to position your workpiece.
  • one setting can cut all four slots for a frame or eight slots for a box. All adjustments are achieved with tool-free knobs..
  • Multipurpose Usage: Try different router bits to achieve different effects: straight bit, V-groove bit, dovetail bit, and more!.
Check Stock

Goplus® Electric Aluminum Router Table Wood Working Craftsman Tool Benchtop

  • ▲You will get 1x Router Table Insert Plate,1 x Pack of Fixing Screws,4 x Router Insert Rings..
  • ▲Size Approx. 235 x 120 x 8mm / 9.3 x 4.7 x 0.3inch.
  • Hole distance: about 62 x 70mm / 2.44 x 2.76inch.【Please check our router table plate size to make sure it matches your router.】.
  • ▲Convenient center-hole bushing used to alig-n the router so it is centered in the bit hole..
  • ▲Make accurately drilling and mounting any router easy..
  • ▲Made by aluminium alloy, it is practical in use and not easy to rust..
Check Stock

Router Table Insert Plate,Router Templates, Trimming Machine Flip Board Woodworking Trimming Machine, Table Insert Plate Aluminum Board Trimming Machine Flip Board for Woodworking

  • 3/4" thick phenolic material will not warp, sag, swell or corrode.
  • 32" wide router table top is 24" front to back with a centered router opening.
  • Rabbeted 9-1/4" x 11-3/4" opening supports most standard router plates and lifts.
  • Extruded aluminum track with 1/4" T-slot and standard 3/4" miter slot.
  • Underside pre-drilled for JessEm router table fences and steel router table stand.
Check Stock

Rockler Trim Router Table – Adjustable Table Router - Best Router Table w/ Pre-Drilled Holes on Back - Router Table w/ High-Visibility Bit Guard, 1/4\ Thick Acrylic Base – Router Tools for Woodworking

  • INCLUDES: (1) Trim Router Table, (1) Transparent Bit Guard, (1) 1/4" Thick Acrylic Base, (1) Removable Fence, (2) T-Knobs, (1) Dust Port.
  • FUNCTION/EASY TO USE: For use with a trim router as a stationary router table for cutting, leveling, jointing, planing routing, and shaping small to mid-sized stock in your home or workshop.
  • Sets up quickly and the router can easily be detached from the table without tools.
  • COMPATIBILITY: The included router plate is designed with multiple predrilled hole patterns that work seamlessly with most trim routers. Fits DeWalt, Makita, Bosch, Ryobi and Porter Cable.
  • SMALL & PORTABLE: Sized for practical functionality, this compact router table can be easily set up on a workbench, table, shelf or any unoccupied work area of your shop – essentially anywhere you see fit.
  • FEATURES: High visibility bit guard to monitor your work, T-knobs that allow you make quick and precise fence adjustments, and an acrylic insert plate that possesses pre-drilled holes compatible with most trim routers on the market.
Check Stock

NovelLife Mini Hobby Table Saw Handmade Woodworking Bench Saw DIY Model Crafts Cutting Tool with Adjustable Power Supply 63mm HSS Circular Saw Blade (R2)

  • We took our new G1023RL table saw with riving knife and made it even better by including a built-in router table.
  • The router table includes support legs and universal T-track router clamping system and the Shop Fox.
  • You'll find that using this system is actually much nicer and more convenient than using a typical router table.
Check Stock

Leegol Electric Benchtop Router Table Wood Working Craftsman Tool Router Table A

  • Extra Large Extension Table: Besides the main table, this router table features extension tables at both ends. Each extension table comes with an....
  • Retractable Guard: There is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is....
  • Multifunctional Fence and Exact Miter Gauge: The fence is able to provide work piece support around the bit and with the combination of jointing fence....
  • Material and Frame: Consists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged....
  • Satisfaction Guaranteed: With a manufacturer warranty you can be sure you will get a quality gift.If you get a poor one,contact with us,we will supply....
Check Stock

QYQRQF Router Plate, Aluminum Router Table Plate for Woodworking Router Table Insert Plate for Trim Routers Wood Trimming Milling Tools with Accessories (Red)

  • Material: The router table insert plate is made of heavy duty aluminum, which could be used for years without rust or deformation..
  • Thoughtful Design: The table top mounting plate is designed with inches and centimeter two measurements fit for trim routers. What’s more, the router plate is made with adjustable holes, which could fit for different brands routers. You could also drill holes as needed..
  • A Set of Tools: The insert table plate is coming with 4 different router insert rings and screws, it could satisfy different needs and woodworking..
  • Multi-function: No maters you are a woodworker or a DIY fan for small projects, the aluminum router table insert plate could be a good helper for your woodworking..
  • Important: Please do pay attention to the size of the router in the detail product picture, to make sure the insert plate could fit for your routers. Any question on product, we could help to solve within 24 hours..
Check Stock

Mini Table Saw, 4\ Mini Hobby Table Saw, Small Cutting Machine, Electric Portable Worksite Table Saw for DIY Handmade Wooden Model Crafts, Metal, Ceramic Tile, Glass Cutting Steel and Iron

  • Item may ship in more than one box and may arrive separately.
  • We took our new G1023RL table saw with riving knife and made it even better by including a built-in router table.
  • The router table includes support legs and universal T-track router clamping system and the Shop Fox Classic Fence.
  • You'll find that using this system is actually nicer and more convenient than using a typical router table.
Check Stock

Dual Deluxe Stackable Featherboards with Riser Blocks Aluminum Miter Lock Bar and T Bolt Hardware for Track or Miter Slot Mounting Ideal for Table Saws Router Tables and Band Saws

  • What is a featherboard you might ask? Is it something I need for my workshop? Well the short answer is yes. Anyone who has a table saw or router table should seriously consider having at least one. Most work shops have more than one handy at any given time. Featherboards are simple devices that help keep your stock up against the fence your running your stock on. They generally act like a third hand by helping you control your stock while you push your stock through..
  • The Fulton Dual Deluxe Stacked Featherboard can be used as one unit or can be separated and used for vertical and horizontal applications. When the featherboards are stacked with the included 2” tall spacers, you’ll have a full 3-7/8” worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence..
  • Many featherboards come with a miter bar locking system that typically do not fit very well. We identified this issue and have redesigned the miter bar making it far more secure and easier to lock into your miter track. The aluminum bar is longer than older designs and is a bit more narrow in....
Check Stock

Flattening Workbenches and Wide Boards with a Router

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

KREG PRS3100 Multi-Purpose Router Table Switch

  • 2 female outlets for use with router and dust collection.
  • Heavy-duty compact design (1.75-Inch by 6.25-Inch by 1.75-Inch).
  • Easily mounts to Kreg steel stand and the Kreg benchtop router table.
Check Stock