ReviewsBuild Surface

House of Kolor QUART KIT WHITE Color KD3000 DTS Surfacer / Sealer w/ Hardener

May Be Used To Topcoat Any Urethane Enamel Finish, Including All Shimrin Base Coats.
An Industry First And Undisputedly The Best Foundation System Available.
Hybrid Epoxy Two Component Primer Designed To Be Used As A Dts Or Direct To Substrate High Build High Build Surfacer, Medium Build Surfacer/High Build Sealer, Or Silky Smooth Sealer.
Application Smoothness Greatly Reduces Surface Prep And Consumption Of Abrasives.

Check Stock

Sovol SV01 SV02 Upgraded Platform Magnetic Flexible Steel Plate Heated Bed with Build Surface Sticker Sheet for Sovol SV01 SV02 3D Printer 255 * 300mm

Flexible, removable, stick to magnetics very well. High strength and heat resistance. Say goodbye to all those removal tools, spatulas, and knives.....
The upper flexible removed build surface designed with model removal in mind. It is replacable, make the whole platform kit lasting long time than PEI....
The stainless steel plate with flexibility and tenacity in the middle makes it easier to remove the prints, flex slightly to pop your print right off..
The lower magnetic base comes with 3M adhesive surface, can fixed on the hot bed. No more tape, no more glue, and release your printing anxiety..
SIMPLE INSTALLATION - Build surface and the stainless steel plate comes together. Just place them on the magnetic base and place 3M adhesive surface....

Check Stock

Wisamic Borosilicate Glass Plate Bed 200x200x3mm for 3D Printers Prusa, Monoprice Maker Select V2, etc

100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use..
Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface..
High binding power when heating. Easy to separate the plastic parts when cooling..
Get you out of the trouble when plastic film decreased viscosity after a period of usage..
Specially designed to fit the 3D Printers Prusa, Monoprice Maker Select V2, etc.

Check Stock

Creality Ender 3 Glass Bed Upgraded 3D Printer Tempered Glass Plate Build Surface for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235x235x4mm

Compatibility: Our glass bed is applicable for Creality 3D printer Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro and most of the Cartesian style 3D printer with a MK2 MK3 hot bed. Please confirm the size of your printer’s platform firstly..
No Edge Curling: The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be sticked on the build surface firmly without glue, avoiding the issue of prints edges curling. Equipped with 4 clips to fix the hot bed..
Super Convenient: It is very easy to remove the prints. The surface of our tempered glass bed is a layer of microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools..
Excellent Flatness: Upgraded ender 3 build plate with smaller CREALITY logo provides flatter and smoother build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of mold during 3D printing..
High Grade Material: Made of 100% Genuine Borosilicate Glass, thick and high quality. Glass bed’s hardness is up to 8 Mohs and is capable to work up to 400 ℃. Using alcohol or acetone to wipe it after repeated use..

Check Stock

ELEGOO Resin 3D Printer Mars 3 Pro MSLA 3D Printer with 6.66-Inch Ultra 4K Monochrome LCD Print Size of 143.43×89.6×175mm / 5.647×3.52×6.8in and Replaceable Activated-Carbon

【4K Monochrome LCD】6.66-inch 4K monochrome LCD screen with a replaceable anti-scratch tempered glass with 9H hardness for a better light....
【Powerful COB Light Source】Upgraded free-form surface COB lens consists of 36 highly integrated UV LED lights, paired with Fresnel lens to deliver....
【Large Build Volume】With a large build volume of 143.43×89.6×175mm (5.647×3.52×6.8 inches), you can print one large model or undergo batch....
【Designed for Reliability】Non-slip hexagon socket leveling screws work with the sandblasted oxide surface build plate for stronger adhesion and....
【Better Printing Experience】Built-in active carbon filter can effectively absorb and filter the resin odor and pungent fumes, giving you a fresh....

Check Stock

Power Treads Hyperdrive Zipline Car Set – Race Track Playset Includes 1 Vehicle and 60+ Pieces

ZOOM DOWN THE ZIPLINE. Build epic trails and fly through the air with the Power Treads Hyperdrive Zipline Pack. Connect the tracks together for....
BUILD. COMPLETE. REPEAT! Includes 60+ pieces with 1 Power Treads all-surface vehicle, 1 hyperdrive transporter, 1 zipline, and a modular track set so....
KICK INTO HYPERDRIVE. Power Treads are all-surface vehicles that flip, rip and roam all over your home.
no wheels needed! Connect, bend, and extend....
AWARD-WINNING: Power Treads received the 2020 National Parenting Product Award, Toy Insider Hot Holiday Toy Award, and was named a 2021 Toy of the....
FOR BOYS AND GIRLS AGES 5 AND OLDER: Compatible with all Power Treads packs. Batteries included (2 AAA)..

Check Stock

Official Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and Branded Power Supply, FDM 3D Printers for DIY Home and School Printing Size 8.66x8.66x9.84 inch

REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling..
SAFE POWER SUPPLY: Ender 3 Pro comes with a branded power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes..
RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages..
SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics..
WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service..

Check Stock

Bosch 03306 Distributor Cap

Superior surface finish prevents dirt and moisture build-up while resisting carbon tracking for long life.
RFI resistors (Asian) / RFI suppression (European) prevents dirt and moisture build-up while resisting carbon tracking for long life.
Installation screws provides quick and easy installation.

Check Stock

Fort Boards: Fort Building Kit | Jumbo Blocks - Kids Building Toys | 90 Piece Set: Yellow

KIDS LOVE FORTS – Indoors or outside, this toy for girls and boys lets kids build forts in their room, backyard or park!.
ENDLESS PLAY – Open-ended building toys always make the best gifts because kids continually find new uses for them..
FUN LEARNING TOY – It teaches STEM & STEAM skills like engineering, creativity, imagination, and spatial reasoning..
SAFE & DURABLE – Designed for AGES 5 and UP, but safe for all ages. Durable enough to be passed on from sibling to sibling..
BUILD BIG – 90 Piece Total: 44 Boards (8 x 8”) & 46 Connectors. Kits pack away small, but build over 20 sq ft of surface area..

Check Stock

Hostar EzEdger Masking Tape Dispenser

With regular masking tape, paint spray will build up on the edge. This build up will form a ridge when dried.
Once the tape is removed, you are left with a rough tape line equal to the tape thickness.
With the folded edge tape dispensed from an EzEdger, the tape floats slightly off the surface allowing paint spray to disperse along the tape line.
This blending results in a smooth feathered edge. A big time-saver.

Check Stock

Lifeproof Home Ceramic Coating Spray Kit - Shine Seal & Protect Stainless Steel Appliances Countertops Glass & More Kitchen + Bath Surfaces - Repels Stains Grime Fingerprints Liquids & More!

EFFORTLESS CLEANING -- Lifeproof Home Ceramic Coating prevents stains, smudges, fingerprints, water-spotting, soap-scum build-up, mineral build-up & more. When surfaces do get dirty, wipe away with ease! Protects surfaces for 6-12 months..
SUPER-SLICK, ANTI-STICK, & ULTRA HYDROPHOBIC -- Lifeproof Home gives surfaces that super-slick, clean glass feeling repelling liquids, stains, and other unwanted elements. DO NOT USE ON FLOORS due to super slick properties..
MULTI-SURFACE SAFE -- Lifeproof Home is invisible and safe to use on nearly any hard surface including granite counters, stainless steel, appliances, laminate, marble, glass, metal, tile, porcelain, stone, painted cabinets, coriander, and many other home, kitchen, & bath surfaces..
NON-TOXIC COATING -- Rest easy knowing your surfaces are protected in a non-toxic coating. Lifeproof Home has passed MTT Cytotoxicity testing..
EASY SPRAY APPLICATION -- Starting with a cleaned surface, simply spray on desired surface, buff in with included microfiber towel, flip towel and remove any residue. Let cure (wait 1 hour for dry use, 4 hours for wet). Lifeproof Home coating can be removed anytime with Isopropyl alcohol..

Check Stock