ReviewsBuilt in Power Amplifier

Monolith M-10 V2 10in THX Certified Select 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...eveloped from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. It is enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500‑watt RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (90....
Check Stock

Monolith M-12 V2 12in THX Certified Ultra 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...eveloped from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. It is enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500‑watt RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (90....
Check Stock

CT Sounds AT-500.1D 700 Watt Class D Competition Mono Amplifier Car Audio

  • Mono amplifier with 500 watts RMS power at 1-ohm load (12.8v).
  • Frequency response: 10Hz to 250Hz (Bass Knob Included).
  • Equipped with 4-way protection circuitry along with a Diode 6A60 for reverse polarity protection.
  • sleep easy at night knowing your car audio amplifier is protected.
  • Built using an advanced PCB board featuring Korean capacitors, high quality transformers and cutting-edge inductors to ensure this car amplifier class d delivers the power you need to destroy the competition in the SPL lanes.
  • Internal wiring features 8AWG OFC cables for enhanced electric current allowing this car amplifier monoblock to deliver louder, cleaner, and more punchy power than other car mono amplifiers in its class.
  • Heavy duty heat sink design, high power MOSFET switching technology, and silicon utilized throughout the internal components will ensure the class d amplifier car audio runs cool for even the most demanding playlists.
Check Stock

Hifonics A1000.2D ALPHA Series Compact 1000 Watt Two Channel Car Amplifier Full Range Super D-Class Amp

  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio..
  • BRIDGEABLE - Full range, four channel amplifier with flexible installation allows this amp to run in four channel or bridged mono mode, giving you the options you need to maximize the output of your car audio..
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth..
  • CONTROL YOUR AUDIO - Control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subs. LED system protection allows you to monitor overload and speaker shortages with illuminated indicators..
  • HIGH QUALITY CONNECTIONS - Secure molded connection terminal for all power, ground and speaker connections. Angled for ease of access while creating a clean wire management profile, to keep your vehicle looking clean while delivering optimal power..
Check Stock

Pyramid PB715X 1000 Watt MOSFET 2-Channel Car Audio Power Amplifier System with Soundstorm 8 Gauge Complete Car Audio RCA Wiring Installation Kit

  • PACKAGE INCLUDES: 1 Pyramid PB715X 1000 watt MOSFET 2-channel car audio power amplifier system and 1 Soundstorm 8 gauge complete car audio RCA wiring installation kit.
  • AMPLIFIER: The amplifier features a MAX power handling of 1000 watts and a RMS power handling of 500 watts at 4 Ohms. The MOSFET modulated power supply has a higher switching speed and includes a built in variable subwoofer crossover and variable gain control.
  • WIRING KIT: The amplifier installation wiring kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect.
  • DIMENSIONS: Dimensions: 7.28’ L x 9.45’ W x 2.09’ H.
  • WARRANTY: The amplifier and the wiring kit both include a 1 year manufacturer warranty.
Check Stock

Hifonics 7 BAND EQ WITH CROSSOVER

  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio..
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth..
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant..
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation..
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark..
Check Stock

DS18 SQBASS8 600 Watts Low Profile Slim Amplified 8 Inch Car Subwoofer with Remote Bass Control + Installation Cable Kit

  • Music power - 8-inch subwoofer from a slim compact design providing 600 watts max. Frequency response: 20Hz - 150Hz. Low impedance 2-ohm subwoofer to bring out the maximum performance of the built-in amplifier.
  • High efficiency bass technology - Digitally optimized subwoofer with built-in amplifier (2-ohm) for efficient and accurate bass..
  • Built-in amplifier & Crossover - designed for easy installation to have sound quality bass at your control (with the remote bass controller) and a low pass filter to be able to fine tune your acoustic preference.
  • Specs - Dimension: 11.6" X 9.7" X 3.2"/ fuse rating: 25a/ low pass filter: 50Hz - 150Hz.
Check Stock

Matched Pair 7-Pin GE JAN 5654W Vacuum Tubes Upgrade for 6AK5/6J1/6Ж1/ EF95/6J1P

  • About Tube + Transistor Hybrid amplifier： Front tube amplifier and rear transistor combine the advantages of two amplifier circuits to achieve the....
  • Tube Amplifier ：Adopt four 6J1 tubes for pre amp, making voice sweet and exquisite..
  • Transistor for Class-A amplifier： Adopt transistors for class A buffer, output power up to 2000mW, can easily drive many kind headphones..
  • XLR and 4. 4mm balanced input/output： It has XLR and 4.4mm balanced input, 4-pin XLR and 4.4mm balanced output, rich and diverse interfaces,....
  • Built-in Mute Circuit： It built-in relay for mute circuit when turn on amplifier to avoid POP noise and make sure the tube is worked at its best....
Check Stock

Hifonics ZTH-1625.5D Zeus Theta Compact Five Channel Car Audio Amplifier Silver – Class D Amp 1600-Watt Onboard Electronic Crossover Built-in Bass Control Bridgeable Bass Remote Included

  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving....
  • BRIDGEABLE - Full range, five channel amplifier with flexible installation allows this amp to run in five channel or bridged mono mode, giving you the....
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics....
  • CONTROL YOUR AUDIO - Control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subs. LED system....
  • HIGH QUALITY CONNECTIONS - Secure molded connection terminal for all power, ground and speaker connections. Angled for ease of access while creating a....
Check Stock

Pyle 4 Multi-Zone Stereo Amplifier - 19” Rack Mount, Powerful 8000 Watts with Speaker Selector Volume Control & LED Audio Level Display - 4-Ch. Bridgeable Switches - Pyle PT8000CH

  • MULTI-ROOM MUSIC: Let music follow you from room to room. This home audio amplifier supports powering up multiple speakers in the same wired system, so you can listen or dance to the same tune in nearly every room, from just about any source or device you desire.
  • 8-CHANNEL HIGH POWER AMPLIFIER: 100w per channel deliver high power performance with 5-way speaker binding posts (Banana Plug) outputs, pass-through output for external amplifier linking (Daisy-Chaining) & integrated 4-channel bridgeable switches.
  • SPEAKER VOLUME CONTROL: This home audio amplifier has speaker selectors with volume control to manipulate the sound of multiple speakers simultaneously. Monitor audio levels with the LED display to check if the output is too loud or too soft.
  • POWERFUL 8000 WATTS: All channels of this stereo power amplifier support a maximum 1000-watts each in a single rack-mountable unit. Bridge two adjoining channels for high-powered outputs and an earth-shattering sound.
  • BUILT-IN LOW IMPEDANCE PROTECTION: Individual channels have built-in low impedance protection to prevent damaging the spe....
Check Stock

Massive Audio EX44 - Car Audio 800 Watt, 200w x 4 RMS, Nano Edge Series, 4 Channel Car Amplifier, Bass Boost

  • HIGH PERFORMANCE CAR AUDIO AMPLIFIER | One of the best values you will find for a car amplifiers for cars in the market! This 12v car amplifier features: 100w x 4 RMS @ 2/4 Ohm / 400w x 2 MAX, Freq: 10Hz - 25KHz, 0~12dB, .
  • PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding or underperforming car amplifiers. Your car audio system would not be complete without our multi-channel Massive amplifier. This car audio amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 10 Volts directly in. Input Level 0.4V - 10V Hi Inputs or Low Inputs..
  • QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS RATED POWER | Get more wattage and quality sound for less money! That is our guarantee! You don't need to set the gains to low to avoid distortion. These car amplifiers provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry....
Check Stock