ReviewsBullnose Mitre Marker

beiyoule Trim Gauge Tool Flush Trim Jig for Bullnose Corners Crown Molding 3/4 Round Drywall Corners Layout Perfect Lines Top and Bottom Bearing Router Bit - 102x72mm

Package includes: 1pc x Bullnose Trim Gauge.
Great for installing both crown and base molding..
Durable hard ABS plastic construction will hold up to years of use..
Accurately mark bullnose corners for exact trim measurement and placement..
【Suitable for】Simplify trim work on 3/4inch rounded drywall corners with this clever jig..

Check Stock

Fuller Tool 320-0755 Ogee Cut Crown Molding Cutting Guide moulding jig hanger installation corners tool trim curved 45 degree cuts for miter saws power radial table home carpentry renovation or repair

Simplifies the process of cutting curved crown mouldings into five easy steps.
Can be used with power mitre, radial and table saws.
Ideal for practically any home carpentry, renovation or repair projects.
Creates snug-fitting 45-degree cuts without having to tilt the saw blade.
Measures approximately: 12-1/2 in. x 4 in. x 3 in. (31 cm x 9.5 cm x 8 cm).

Check Stock

Mini Brass Wood Jack Planes for Hobbyist Model-makers Wood Workers (Set of All 3 Jack Planes)

Set includes 3 mini jack planes includes 1 x Bullnose plane, 1 x Scraper plane, 1 x Block plane.
Blades are hardened and tempered. Solid Brass and Hardwood construction.
The bullnose plane tool: 3 inch l x 1/2 inch w x 1/16 inch h with 23° blade angle The scraper plane tool: 3 inch l x 1/2 inch w x 1/16 inch h with 25° blade angle The block plane tool: 3 inch l x 1/2 inch w x 1/16 inch h with 25° blade angle.
They are great for adjusting the soles of small planes, as well as for touch up on full size projects..
These planes are very useful for hobbyists for doing small precise jobs where a bigger plane would be too large.

Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

... miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen the knob to quickly adjust the angle. It is very suitable for cutting wood at a specific angle and can help you achieve a perfect cut..
❤ [Perfect wood cutting project] Table saw miter gauge is widely used in woodworking DIY, very suitable for wood cutting projects: it can be used for table saws, band saws, planers, lockstitch machines, joints, miter fence systems are currently A must-have for every family. If there is a product quality problem or any problem, we can replace it at any time (please see the picture size) and its slideshow..

Check Stock

Aluminum Box Joint Jig, Router Table Saw DIY Tools Wood Jig Size Approx 450x60x30mm for Miter Gauge Woodworking Table Saw Tools

【Excellent Workmanship】The product has high precision and excellent workmanship, and can be used for most table saws with standard slots..
【Premium Material】The product is made of high-quality aluminum alloy material, wear-resistant and anti-rust, excellent performance and long service life..
【Scope of Application】The aluminum box joint fixture is suitable for mitre gauge woodworking tools, and it is suitable for the box-type joint clamp of mitre gauge..
【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
【Quality Service】We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..

Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

... miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen the knob to quickly adjust the angle. It is very suitable for cutting wood at a specific angle and can help you achieve a perfect cut..
❤ [Perfect wood cutting project] Table saw miter gauge is widely used in woodworking DIY, very suitable for wood cutting projects: it can be used for table saws, band saws, planers, lockstitch machines, joints, miter fence systems are currently A must-have for every family. If there is a product quality problem or any problem, we can replace it at any time (please see the picture size) and its slideshow..

Check Stock

Olympia Tools Saw Storage Mitre Box with 14-Inch Backsaw with 90 degree, 45 degree, and 22-1/2 degree Angle Slot Types Plastic Mitre Box Saw Storage Mitre Saw Box for Woodworker Carver Carpenter

PERFECT FOR WOODWORK: This woodwork tool set is the perfect pack for helping you to complete your wood work craft projects. Use the precision cutting tool to create angles for wooden frames, shelves and more!.
MULTIPLE ANGLES: Using this miter box set for woodworking, you can cut lengths of wood at either 90-degree, 45-degree, and 22-1/2-degree mitre slots., for precision wood cutting when it's needed most..
SAW INCLUDED: So you can get straight to work on any woodwork projects, you will also receive a 14" hand saw with this mitre. Of course, you can also use your own saw should your choose to..
SPECS: Overall, this miter box measures 11" x 5" x 3.4" and is made using ABS. The saw measures 17.7" x 3.7" x 1.2" ..
DURABLE DESIGN: Made using rugged ABS, this miter box and steel saw set will see you woodworking for years to come with the proper care..

Check Stock

Excel Blades Metal Mitre Box Set with Heavy Duty K5 Handle and Razor Pull Saw Blade, Small Mitre Box and Saw with 2 Cutting Angles for Wood and Soft Metal

100% Made in the USA, hand-powered table top mitre saw set made from premium aluminum and steel.
Aluminum construction Mitre Box has slots for both 45-degree and 90-degree cutting angles.
Razor Saw Set includes heavy duty K5 hobby knife handle with a 5" steel pull saw blade with 46 teeth per inch.
Used for cutting perfect angles in hobby and craft projects and can also be used for small DIY molding and framing projects aroiund the house.
Great for crafters and hobbyists, for cutting modeling materials including wood, plastic and soft metalDescription- 100% Made in the USA, hand-powered table top miter saw set made from premium aluminum and steel- Aluminum construction Miter Box has slots for both 45-degree and 90-degree cutting angles- Razor Saw Set includes heavy duty K5 hobby knife handle with a 5 steel pull saw blade with 46 teeth per inch- Used for cutting perfect angles in hobby and craft projects and can also be used for small DIY molding and framing projects around the house- Great for crafters and hobbyists, for cutting modeling materials including wood, plastic and soft metal.

Check Stock

Gohelper Miter Saw Protractor Angle Finder Tool Guide case, 7 inch Aluminum Measuring Miter Gauge Protractor Inside & Outside Corner Angle Finder Protractor for Woodworking, Metal, Crown molding

Accurate Measurement: The miter saw protractor angle finder provides two scales: single cut and miter cut, external scale to measure a single cut and internal scale to measure a miter cut, conversion table which allows values of the spring and corner angles being converted into mitre and bevel angles..
Exquisite Craftsmanship: The O-ring design makes the saw protractor angle finderrotate full 360 degrees, ensures mitre saw protractors fit the corner smoothly when doing measuring operation, precise read on inside or outside corners. precision laser engraving scale ensure the dial is clear and easy to read..
Excellent Material: The miter saw protractor tool is made of aluminum alloy, which has strong wear resistance and corrosion resistance, expand itself service life, 7inch size and lightweight material makes it easy to carry..
4. Wide Applications: the miter saw protractor guide can perform applications, such as measuring external angles, measuring internal angles, and measuring height angles, it is suitable for saw protractor for woodworking, metalworking, miter single cut, miter cut, crown shaped, pipe, and other carpentry applications..
Quality Assurance: We have great quality aluminum saw protractor, if you have any questions or problems in the proce....

Check Stock

Metal Shelf | Stainless Steel Wall Mount NSF Shelving for Commercial Restaurant, Kitchen, Laundry Room, Food Truck

18 gauge 430 stainless steel shelf top, and stainless steel shelf mounting brackets. Bullnose Edge. 1" Backsplash. Shelves are available in sizes ranging from 24” to 84” and width ranging from 10” to 18”. All shelves come with 2 support brackets (3 brackets for shelves over 72” long). Professional and sleek look make this space saving shelf a good fit in commercial or residential environment..
Commercial grade heavy duty quality, Suitable for commercial and residential use, Easy to assemble and install. This corrosion resistant wall shelf can handle anything you throw at it and will last for years to come. Easy to clean and sterilize, metal shelves are superior to wood or glass. Food and liquid won’t get stuck or ruin the integrity of the surface. Easily wipe away excess with no fuss, mess, or contamination..
This shelf can be used in almost any location where there is a need to store item and save space. Most common places where our customers use our shelves include: commercial kitchen, garage, closet, laundry room, utility and equipment room, lab, home kitchen appliance shelf for toaster and microwave, etc..
The shelf ships knocked down. Hardware is included..
This product is designed and finished for use in a commercial environme....

Check Stock

OLETBE 1/2 Inch Shank Bullnose Router Bit 5PCS，Half Round Bearing Carbide Tipped Edge Cutting Bits， Radius 1/8 3/16 1/4 5/16 3/8 Woodworking Milling Cutter CNC Tool Silver

※※【Premium Size】--Bullnose router bit radius sizes include: 1/8"r, 3/16"r, 1/4"r, 5/16"r, 3/8"r.
Bead Sizes: 1/4", 3/8", 1/2", 5/8", 3/4".
Size: Shank diameter 1/2". Add a bullnose or half-round to the edges of shelves, table tops or any furniture top surface, ideal for flooring and wainscot paneling.
※※【Smooth & Sharp Cutter】--Carbide cutters,featured with double flutes, straight shank, Solid hardened steel bodies with Anti-Kickback Design, Use on CNC and other automatic table-mounted portable routers. perfect for woodworking, edging, trimming, grooving, veining wood projects..
※※【Wide Application】--Suitable For: MDF, solid wood, MDF, particle board, plywood, wooden door frames, wooden window frames, cabinets and boxes, etc.However, please avoid to cut ferrous metal and non wood materials, such as steel, iron and sand..
※※【High Quality】--Using high-grade YG6X original alloy. High abrasion resistance, high-precision grinding technology. Strong and durable. Constructed using high quality materials, this durable router bit set will allow you to complete all your projects with confidence..

Check Stock