ReviewsBushing Removal Tools

X AUTOHAUX 1Set Door Hinge Bushing Liners Replacement for Jeep Wrangler JK 2018 4 Door

  • The tough structure bushing removal tool has good rigidity, high precision and long service life..
  • Door hinge bushing liners help you line up the door pins against the hinge and put your doors back easily..
  • Metal construction, the product is with great performance. The bushings never rust..
  • The package includes bushings and an installation tool so you can remove your factory bushings and install your new door liners..
  • Note: Please check the detail and pictures carefully before purchasing..
Check Stock

X AUTOHAUX 1 Set Door Hinge Bushing Liners Replacement for Chevrolet S10 1994-2004 2 Door

  • The tough structure bushing removal tool has good rigidity, high precision and long service life..
  • Door hinge bushing liners help you line up the door pins against the hinge and put your doors back easily..
  • Metal construction, the product is with great performance. The bushings never rust..
  • The package includes bushings and an installation tool so you can remove your factory bushings and install your new door liners..
  • Note: Please check the detail and pictures carefully before purchasing..
Check Stock

X AUTOHAUX 1 Set Door Hinge Bushing Liners Replacement for Lincoln Town Car 1982-2011 2 Door

  • The tough structure bushing removal tool has good rigidity, high precision and long service life..
  • Door hinge bushing liners help you line up the door pins against the hinge and put your doors back easily..
  • Metal construction, the product is with great performance. The bushings never rust..
  • The package includes bushings and an installation tool so you can remove your factory bushings and install your new door liners..
  • Note: Please check the detail and pictures carefully before purchasing..
Check Stock

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

Penn State Industries PKSP105A 7mm Pen Kit Bundle #1 Woodturning Project

  • This is a woodturning project kit. Pen hardware, selected bushing sets, and wood blanks only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. 7mm drill bit (PK-7MM), standard 7mm slimline bushings (PKM-BUSH3) and all other turning tools and supplies are not included..
  • Includes (8) 7mm Ballpoint Twist Pen Kits, (3) Compatible Bushing Sets, and (10) 5/8" x 5/8" x 5" Cocobolo Wood Blanks (WX01-1).
  • You will receive (1) of each of the following penturning kits: Premium Slimline in Gold (PK-PEN), Premium Slimline in Brushed Satin (PK-PENSAT), Premium Comfort in Gold (PKCFPEN), Premium Comfort in Brushed Satin (PKCFPENS), Designer in Gold (PKMONT224), Designer in Brushed Satin (PKMONT2S), Trimline in Gold (PKXM24), Trimline in Gun Metal (PKXMGM).
  • You will receive the following (3) Compatible Bushing Sets: PKCFBUSH, PKXMBU, and PKMONT2-BU.
  • Not included: Standard Slimline 7mm Bushing Set (PKM-BUSH3) needed for the Premium Slimline Kits or the 7mm drill bit (PK-7MM) needed to make all the kits.
Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

  • Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
  • Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
  • There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock

WoodRiver Fixed Through Dovetail Template for 12-1/2-Inch WoodRiver Dovetail Jig

  • Expands the capabilities of your WoodRiver Deluxe Dovetail Jig.
  • WoodRiver Deluxe Dovetail Jig is not included.
  • CNC machined steel template for through dovetails using included bits and guide bushing 1/2" x 8° router bit with 1/4" shank and 1/2" straight router bit with 1/4" shank.
  • 1/2" template guide bushing with lock nut -.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

Miady 50AMP RV Replacement Female Plug with Easy Unplug Design, ETL Certified

  • PERFECT REPLACeMENT: Rated at 125V / 250V female plug, fits to replace the old plug for your 10AWG / 4C extension cord of 50A RV, Camper, Trailer, 5TH Wheel..
  • DURABLE ENOUGH: ETL certified, Inner strain relief clip and outer bushing firmly secures cable. Well-conductive copper parts and ABS plastic construction make nearly indestructible..
  • ADJUST THE TIGHTNESS: Built with rubber bushing inside, adjusts the tightness of different gauge cords, sealed from moisture to some extent..
  • CONVENIENTLY UNPLUG: Equipped with ergonomic handles, designs to make removal easier and effortless on the cord and plug..
  • EASY TO INSTALL: Following the clear directions, easily attaches and reassembles the wires. - We provide 24*7 friendly customer support and also back our products for 18 months. Please feel free to contact us..
Check Stock

The Warrior's Mind: For Race Drivers

  • 【Wide Compatibility】Handles all popular OE and aftermarket components, including Horton pin and bushing components. Services bushings with diameters from 1-1/4 inch through 1-7/8 inch and pin diameters from 7/8 inch through 1-1/8 inch.
  • 【Function】 Provides 10 tons of hydraulic force for quick and easy removal and installation of truck front spring eye bushing assemblies.
  • 【Superior Quality】 Made of premium steel material, durable and sturdy, not easy to wear, providing a long service life. Coated with a finish for rust and corrosion resistance, hardened construction for high strength and impact resistance..
  • 【Easy Storage】Provide a heavy-duty tool case for storing and organizing parts. No need to worry about parts loss, easy to carry, the case would provide a better user experience.
  • 【Satisfactory Service】 If you are not satisfied with our products.You can request a full refund within 30 days to support a 12 month warranty.Professional and sincere service allows you to purchase without risk !.
Check Stock

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

  • ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)..
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (2....
Check Stock