ReviewsButt Joint Band Clamp

EVIL ENERGY 3.0 Inch Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2PCS

  • Size: Joins 3.0" OD pipe to 3.0" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

EVIL ENERGY Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2.25 Inch,2Pcs

  • Size: Joins 2.25" OD pipe to 2.25" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

Cv Joint Ear Clamp Banding Tool Cv Boot Clamp Pliers Automotive Hose Axle Plier for  ATV UTV Most Cars Boot Clamps

  • Design:The CV joint boot clamps pilers are newly.With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively.Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • Funnction:This CV joint boot clamps pilers are key tools to fix the CV boots.They are used to bind, tenseion and sercure CV boot banding straps It helps you work morequickly.Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses..
  • MATERIAL:CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish.It looks much more shinning and it is totally rust adn corrosion resistant. Safe and durable..
  • APPLICATIONS: Use with any banding up to 2/5-inch (10mm) in width and vacuum hoses,for Ear-Type Clamp Crimping or Removal on for Audi, VW, BMW, Mercedess, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps,also be used for securing ATV UTV boot clamps..
  • CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Pliers ....
Check Stock

Clamp Pliers with CV Boot Clamps Kit, Ear Boot Tie Pliers,Stainless Steel Universal Adjustable AXLE CV Joint Boot Crimp Clamp Kit,Hose Axle Plier CV Clamp Tool CV Joint Banding Tools

  • 【High-quality】CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • 【 2 Pcs CV Joint Boot Clamp Pliers 】 The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • 【24 Pcs CV Boot Clamp】Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • 【Package Included】:1*CV Clamp Tool,1*CV Joint Boot Clamp Pliers,12*Small CV Boot Clamps,12*Large CV Boot Clamps.
  • 【CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers】 The CV joint boot clamps pilers are newly.AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Plier....
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Pack of 2 Butt Joint Narrow Band Exhaust Seal Clamp Muffler Clamp Band Stainless Steel Connection for Cars (2IN)

  • The band clamp is a wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket car systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
  • The butt strap clamp is a simple and effective way to connect car system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
  • Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
  • Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
  • Maximum Diameter: 2", Band Width: 1 1/4" (1.25").
Check Stock

Roadformer 5" Butt Joint Exhaust Clamp - Aluminized Steel for 5 inch OD exhaust pipes, muffler ends and exhaust system connection with leakage free (2 Pack)

  • 2 PIECES IN PACKAGE – 5 inch butt joint exhaust clamp is made in high quality Aluminized Steel, it is used for 5 inch OD pipes & muffler ends connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, New design provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 560 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

SYKRSS 2.0' Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.0" OD pipe to 2.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

SYKRSS 2.25'Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.25" OD pipe to 2.25" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the desired length and get tighter with each pull. I....
Check Stock