ReviewsButt Weld Gate Valve

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Magpul MOE Fixed Rifle Stock, Gray

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

Magpul MOE Rifle Stock, Flat Dark Earth

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

Magpul MOE Rifle Stock, Olive Drab Green

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

Heavy Duty Gate Hinges 7 Inches- 2 Pack Weld On Install Black Iron Barrel Hinge 900lbs Capacity for Swing Door Trailer Ramp Metal Driveway Gate Drive Gate

  • Solid Heavy Duty Hinges: Made of durable solid steel, we offer 2 size for you to choose : 7inch and 5 inch barrel hinges, the 7 inch hinge can hold up to 900 lbs capacity and 5 inch hinge can hold up to 450 lbs capacity..
  • Weld on Install - This metal gate hinge is perfect for heavy duty swing gate, trailer gate ramp, driveway gate and the extra thick back plate make it can be easily welded on..
  • Smooth Swing Design: Features grease fitting nipple keep the internal ball bearings lubricated, making this hinges swing smoothly and extending the working life of the gate hinges..
  • Anti Corrosion & Rust-Resistant: Matte black coating finish surface, this heavy duty barrel hinges are suit for outdoor and indoor using..
  • What You Get: 2 pack heavy duty barrel hinges , our 12 month 100% money back guarantee and friendly customer service..
Check Stock

Waterson Heavy Duty Commercial Fully Adjustable Mortise Self-Closing Gate Hinges 2-Pack – K51MP-450 (SA.SA1)-Black

  • HIGH STRENGTH - The gate hinge is made of high quality steel so that each pair of the hinge can hold up to 400lbs driveways and security gates!.
  • RUST RESISTANT - The black powder coating makes the hinge has a superior rust resistance performance!.
  • EASY TO INSTALL - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall.Minimum distance between post and gate should be 1.5", to accommodate for the welding plate and barrel. The threaded arm allows you to easily adjust the distance between gate and post!.
  • LONG LIFE TIME - Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated. It'll last a long life time in good maintenance!.
  • EXCELLENT SERVICE - Backed by a 12 month Warranty and 7*24 hours Technical Support!.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

LA Ornamental Heavy Duty Guardian Compatible Gate Adjustable Hinge Driveway Bolt On Gate & Post with Zerk

  • Largest weld surface with Large BOLT ON Plates which makes easy to install and mount.
  • Grease zert for easy lubrication, ADJUSTABLE GATE HINGE - BOLT ON GATE & POST WITH ZERK, size: 7 3/4 " High x (from 3 1/4" to 3 3/8" wide).
  • Maximum weight rating of 1000 lbs per pair of hinges.
Check Stock

Eastwood Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes

  • Exclusive, Patent Pending, Design Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
  • Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
  • Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
  • Achieve Solid, Full-Penetration Mig Or Tig Butt Welds.
  • Full Material Thickness After The Repair.
Check Stock

Ar-15 Defensive Rifle Operation Maintenance Shooting Instruction Defensive DVD

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

Heavy Duty Guardian Compatible Gate Adjustable Hinge Driveway Bolt On Gate & Post with Zerk, Sold in Pairs

  • Largest weld surface with Large BOLT ON Plates which makes easy to install and mount.
  • Grease zert for easy lubrication, ADJUSTABLE GATE HINGE - BOLT ON GATE & POST WITH ZERK, size: 7 3/4 " High x (from 3 1/4" to 3 3/8" wide).
  • Maximum weight rating of 1000 lbs per pair of hinges.
Check Stock