ReviewsButt Weld Steel

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

HITBOX 200A ARC Welder Alkaline Electrode Weldable, 110V 220V 2 IN 1 Lift TIG/MMA VRD Continuous Welding Machine Fits Below 1/8' 4.0 mm Welding Rods,Hot Start Welder for Outdoor Home Industry Use

  • Unique arc welder with lift function-Usually, arc welders can only weld carbon steel, alloy steel, mild steel, and zinc plated pipes. With lift tig capability, our MMA-200 can weld these materials as well as stainless steel. Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 200A, and it can handle alkaline welding rods! !!.
  • Weld more types of rods-As you know, it is difficult to weld 7018 and cellulose rods with an arc welder with low no-load voltage. To meet the needs of our customers who weld these rods, we increase the no-load voltage of this welder to 78V. Now you can weld other common rods such as 7018 cellulose rods and 6013J422. You can weld 2.5mm 3.2mm rods for a long time, drag solder or weld 1/8" 4.0mm rods for 1-2 hours.
  • 110V 220V Dual Voltage Arc Welder-This welding machine is 110V 220V and comes with a 35-50mm² quick connector, which can withstand higher current than other connectors. This feature allows the welder to work longer.Because of the high current, extending the weld cable to 50 meters does not attenuate the current..
  • 60% duty cycle, longevity-The rated duty cycle of HITBOX MMA200 is 85% for arc welding and 50% for TIG welding. Auto....
Check Stock

2 Pcs M18x1.5 Thread Adapter, 304 Stainless Steel

  • 【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
  • 【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • 【Size】M18X1.5 thread adapter, confirm the product size before buying..
  • 【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
  • 【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..
Check Stock

Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

  • ◆【Fit for】 : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates..
  • ◆【Material】: The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck..
  • ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
Check Stock

Magpul MOE Mil-Spec Fixed Stock, Gray

  • Provides an inexpensive, fixed stock option.
  • Has a slim profile and improved cheek weld.
  • Compatible with PRS Extended Rubber Butt-Pad.
Check Stock

Magpul MOE Fixed Stock, Black

  • Minimum weight and bulk with reinforced polymer construction.
  • Cheek weld combines a slim profile with user comfort.
  • Optional snap on Cheek Risers are available for use with optics.
  • Internal storage compartment optimized for factory cleaning kit.
  • Rubber butt-pad offers an anti-slip surface and increases impact protection.
  • Rollover allows for easier shoulder transitions and better fit.
Check Stock

J-B Weld 8217 TankWeld Gas Tank Repair - 1 oz.,Dark Grey

  • J-B WELD TANKWELD: A hand mixable, steel reinforced two part epoxy putty stick that is formulated to repair and rebuild various holding tanks. J-B Weld TankWeld is chemical resistant against petroleum, hydraulic fluids and many other harsh chemicals once fully cured. TankWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, it takes 5 minutes to set and cures in 1 hour. J-B Weld TankWeld set and cure color is dark grey..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld TankWeld has lap shear strength of 900 PSI. TankWeld can be molded, shaped, sanded, drilled and tapped..
  • MAJOR USES: Fuel tanks, metal radiators, metal fuel or chemical tanks, metal housings and stripped threads. Surface applications include: iron, stainless steel, copper, brass, aluminum, and bronze..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Weld On Grab Chain Hook G70 3/8\ Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tow Tie Down Forged Steel Working Load Limit: 6600 lbs

  • Weld-on Type, Grab, Hook. Working load limit 6600 lb.. Size 3/8 inch, Grade 70, for use with 3/8 in chain.
  • The best hook-used for welding on the tractor bucket, it is very suitable for any field of use, and can be used with the following statements: weld on hooks weld chain hook weld on clevis weld-on clevis grab chain hooks weld tow hook weld hooks for buckets forks weld hook3/8 weld hook grab hooks 3/8weld on grab hook weldable hooks weldon hooks weld clevis hook 3/8weld on chain hooks.
  • Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors..
  • Material: Forged Steel，Package Includes:4pcs hooks.
  • Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort to provide customers with satisfactory service. Feel free contact us by emails if you have any problems..
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock

J-B Weld Company 8265-S 3 Pack Original Steel Reinforced Epoxy Twin Pack, Dark Grey

  • J-B WELD STEELSTIK: A hand mixable two part epoxy putty stick that is steel reinforced & non-rusting to quickly repair or rebuild anything made of metal! J-B Weld SteelStik is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, SteelStik takes 5 minutes to set and cures in 1 hour. J-B Weld SteelStik set and cure color is dark grey..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld SteelStik has lap shear strength of 900 PSI, can withstand continuous temperatures up to 350F (176C ) and intermittent temperatures of 450F (232C), and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured. SteelStik can be molded, shaped, sanded, drilled and tapped..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

CURT 49090 2-Inch x 9-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock