ReviewsButt welded Gate Valve

PSCCO 4PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • A set of 4 Intergrips firmly fix the flat or curved panel edge-to-edge and surface-to-surface to achieve a good clean connection..
  • The welding clamp is made of galvanized steel, which can prevent rust and is easy to install or disassemble..
  • Butt welding tongs can fix workpieces for precise butt welding and side-to-side welding..
  • A large number of fixtures suitable for any welding kit. The gap between the board and the board is maintained at 0.40 inches for edge-to-edge welding..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Invisible/Concealed Single Door Hinge [Set of 2] Finish: Bright Brass Plating

  • The butt hinges are suitable for furniture lids, cabinet doors, wardrobe doors, tool boxes, jewelry storage boxes, etc.
  • Butt hinges are made of good quality material which can prevent blotching and corrosion. More stable, durable, convenient and practical.
  • These gate hinges can be used on domestic garden,barn doors and even shed doors.These metal gate hinges can also be used on a range of different materials..
  • Thinges offer additional support to doors allowing the door hinges to be used on a number of light to medium door types..
  • Thanks for visiting. Our store promises that all products are new products, if you have any questions, please email me, I will reply you within 24 hours.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Heavy Duty Gate Hinge Pair 7 inches | Door Hinge Barrel 900 Lbs Load Capacity for Swing Gate, Trailer Ramp Gate - Weld on Install

  • MATERIAL - Matte black coating and durable thick steel material giving it a longer service life and anti-rust features.
  • EASY TO INSTALL - Welding required for installation, better remove the black powder coat on the mounting plate before welding.
  • LOAD CAPACITY - 7" Barrel Style 900lbs load Capacity hinges are Hollow cylinder shaped, perfect for a 90 degree hard swings or more depending on the installation.
  • GREAT FOR - Heavy duty swing gate, trailer ramp/ trailer gate, can hold up the gate well and prevent the gate from sagging.
  • NOA STORES 100% SATISFACTION GUARANTEE – Our first priority is your SATISFACTION. If you have any problem, just leave a message and we will find the best solution that will make you 100% happy.
Check Stock

Heavy Duty Gate Hinges 7 Inches- 2 Pack Weld On Install Black Iron Barrel Hinge 900lbs Capacity for Swing Door Trailer Ramp Metal Driveway Gate Drive Gate

  • Solid Heavy Duty Hinges: Made of durable solid steel, we offer 2 size for you to choose : 7inch and 5 inch barrel hinges, the 7 inch hinge can hold up to 900 lbs capacity and 5 inch hinge can hold up to 450 lbs capacity..
  • Weld on Install - This metal gate hinge is perfect for heavy duty swing gate, trailer gate ramp, driveway gate and the extra thick back plate make it can be easily welded on..
  • Smooth Swing Design: Features grease fitting nipple keep the internal ball bearings lubricated, making this hinges swing smoothly and extending the working life of the gate hinges..
  • Anti Corrosion & Rust-Resistant: Matte black coating finish surface, this heavy duty barrel hinges are suit for outdoor and indoor using..
  • What You Get: 2 pack heavy duty barrel hinges , our 12 month 100% money back guarantee and friendly customer service..
Check Stock

Waterson Heavy Duty Commercial Fully Adjustable Mortise Self-Closing Gate Hinges 2-Pack – K51MP-450 (SA.SA1)-Black

  • HIGH STRENGTH - The gate hinge is made of high quality steel so that each pair of the hinge can hold up to 400lbs driveways and security gates!.
  • RUST RESISTANT - The black powder coating makes the hinge has a superior rust resistance performance!.
  • EASY TO INSTALL - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall.Minimum distance between post and gate should be 1.5", to accommodate for the welding plate and barrel. The threaded arm allows you to easily adjust the distance between gate and post!.
  • LONG LIFE TIME - Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated. It'll last a long life time in good maintenance!.
  • EXCELLENT SERVICE - Backed by a 12 month Warranty and 7*24 hours Technical Support!.
Check Stock

Magacyo Fence Gate Kit Gate Hardware with Gate Latch - Anti Sag Gate Kit - Updated 90 Degree Right Angle Gate Hinges - Gate Corner Brace Bracket

  • Upgraded Design: The Reinforcement Plate Bracket and Door Shafts instead of gate hinges promise Magacyo anti sag fence gate kit at 90 degree right angle and NEVER-BEND..
  • Kindly Note: Install door shafts must be 2 inch space between the gate frame and the wall.(If needed, please adjust the gate frame widths.)Please refer to installation instruction..
  • No sagging & curving gate: Made of heavy gauge steel with superior powder coating, and strong welding could prevent gate corner brace bracket from sagging, twisting, wearing or tearing..
  • Package Included: Gate brackets come with Self Locking Gate Latch, Gate Door Shafts, Installation Instruction and All Mounting Screws. (No need to purchase gate latch additionally anymore.).
  • Widely Use: Gate frame kit fits to 2x4 post, used to build garden fence, shed door, driveway gate, corral gates, wooden window, barn door, pool door, utility door, deck gate, pool gate and so on..
Check Stock

Bobco Metals Steel 5\ Barrel Gate Hinges for Heavy Gates & Doors - Welding on Larger Iron or Steel Gates Up to 450 Pounds - Grease Zerk Fitting - Steel Barrels & Copper Pin - 2 Units

  • 5" Barrel Gate Hinges are perfect for mounting a wide variety of gates and doors. Each hinge has four parts: 1 male barrel, 1 female barrel, steel ball and grease zerk fittings. The hinges with attached welding plates are made from steel. The hinge pins are high quality copper..
  • Each hinge set measures 5" long and 1" wide. The height of the hinge is 1.25". Each welding plate measures 1.94" long and 1" wide. The thickness of the plates is 0.375"..
  • Easy to Mount - these barrel hinges are easy to attach to your gate or door and the mounting posts. Clearly defined mounting plates make it easy to know how far along to weld. They are also easy to use with spacers to allow gates or doors to open as far as the post will allow. All hinges come pre-painted black, but are easy to repaint if you prefer a more neutral shade..
  • Each pair of barrel gate hinges holds up to 450 pounds. They are perfect solutions for driveway or security gates, swinging security doors, trailer gates, and more!.
  • Hinges slide apart easily if you need to temporarily remove the gate or door, and slide back together just as easily..
Check Stock

2 Pieces 3 Heavy Duty Weldable Hinges 12 Ga Welding Long Lasting Steel Butt Hinge Corrosion and Rust Resistant Metal Weld on Hinges for Trailer Door Heavy Gates

  • What You Will Get: you will receive 2 pieces of weldable hinges, the size of them is about 3 x 3 inches, and the thickness is about 12 Ga, the weight is about 0.34 lb, besides, each hinge can bear about 25 lb of weight, you can choose them according to your needs.
  • Strong and Reliable: this weldable metal hinge is made of steel, strong and reliable, and it is with nice bearing capacity, suitable for heavy gates and doors, it is not easy to break, you can use the hinge for a long time.
  • Easy to Install: these heavy duty gate hinges do not need to be fixed with screws or other fasteners, only need to be welded at the place you want.
  • These heavy duty gate hinges are dark gray and don't have coating, they can be painted to match the metal surface to which they are attached.
  • Using Method: you can weld the metal gate hinges directly to the door, or you can drill holes and screw them on the doors (screw is not included), you can choose the installation method according to your needs.
  • Applicable Occasion: you can take these weld on steel hinges for home door use, and they are also suitable for yard gate, trailer and other occasions, strong and safe to use.
Check Stock

Ghost Controls Heavy-Duty Automatic Gate Opener Kit for Swing Gates with Long-Range Gate Opener Remote - Model TSS1

  • Single Gate Opener: Designed for a single swing gate up to 20 feet or up to 900 pounds. This automatic gate opener is perfect for all types of....
  • Kit Includes: Gate opener arm, control box with control panel, 3-button gate opener remote transmitter with visor clip, tube gate bracket, mounting....
  • Great Range, Easy Installation: Gate opener remote range up to 1,000 ft. Install with commonly available tools. No welding or high-voltage electrical....
  • Smart Gate Opener: Compatible with third-party devices provides the ability to control your battery powered automatic gate opener using a smartphone....
  • Quiet, Reliable & Lifetime Assurance*: Our driveway gate openers are constructed for years of reliability with smooth and quiet operation and 18-month....
Check Stock