ReviewsBuy Non Standard Bolts

Anwenk Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate 5/16\ (M8) Sofa Legs with Hanger Bolts,Screws,Strengthen Weak Furniture Repair Damaged Sofa Couch Seat,Set of 4

Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (Metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of sofa leg mounting plates.
16 pcs of screw adapters for 5mm unthreaded holes..
Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10 hanger bolts, these plates allow you to use standard 8mm to convert to U.S. Standard Legs by simply attach these mounting brackets with the over the hole in the furniture frame..
4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.

Check Stock

Toilet Seat Bolts Compatible with TOTO Expanding Rubber Top Toilet Seat Hinges Screws Replacement Fixings Nuts Screws Mount Seat Hardware Toilet Repair Screw Toilet Seat Replacement Parts Kit

【Universal Application】Fix expanding rubber top nuts screw set blind hole with two expandable ball is great for broken or old toilet seat hinges. Fits for Toto toilets and most standard toilet seats with top fix hinge..
【Rubber Bungs】The toilet seat mounting bolts have a threaded section so you can just push them into the holes in the top of the toilet pan and when you tighten the screw it expands and tightens itself into the hole, without the need of a bolt on the other end of the screw..
【Top Quality Toilet Bolts】Toilet seat screw replacement parts kit is with rubber bungs and stainless steel screw, ensuring long time use. Hinge blind hole fittings with two expandable ball are suitable for most American standard toilets..
【Package includes】Toilet seat hinge bolts and nuts includes: 2 pieces of 2.52inches (6.4cm) black expanding rubber, 2 pieces of 2.99 inches (7.6cm)length bolts, 2 pieces of 0.75 inch (1.9cm) stainless steel gasket and 2 pieces of 0.6 inch (1.5cm) rubber washer..
【Top Tightening Seat Mounting Bolts】Toilet seat hinges replacement parts is great for broken or old toilet seat hinges. Toilet seat nut are very easy to fit done in a matter of minutes, simply remove old bolts clean around the area and fit the new bolts..

Check Stock

Leg Mounting Plates, 4 Sets Furniture Leg Attachment Plates, 5/16\(M8) Industrial Grade Flat Mounting T-Plates with Hanger Bolts, Screws, Strengthen Weak Furniture Repair Damaged Sofa Couch Seat

【Widely Application】 The mounting plates fit most types of furniture in the market, is good helper in repairing the furniture, attaching legs to new or damaged sofas, couches, seats, ottomans and more, no more wobbly leg..
【Industrial Standard】 Each T-plate is 2" x 2" and 1/4" deep (approx), plates have 5/16" threaded (Metric M8) attachment holes for hanger bolts, have 4 unthreaded holes..
【Easy to Install】No need to purchase compatible hanger bolts and the screws, can be installed in a few minutes. package includes all necessary parts, 4 pcs sofa leg mounting plates, 4 pcs M8 hanger bolts, 4 pcs M8 female converters, 16 pcs screw..
【Convert to U.S. Standard Legs】 If your sofa legs are pre-drilled for M10 hanger bolts, these plates allow you to use standard 8mm to convert to U.S. standard legs by simply attach these mounting brackets with the over the hole in the furniture frame..
【Sturdy & Durable】The strong mounting plates is made of premium metal, can hold up the furniture well and extend the life of yourcouch, dresser, table and ottoman. if you have any question about our mounting plates, please feel free to contact us immediately..

Check Stock

(10 pc)1/4-20 x 2\ Long Square-Neck Carriage Bolts Set w/Nuts & Washers,Zinc-Plated,Carbon Steel Grade 2,by Fullerkreg

Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole..
About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening..
Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee.
Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is ¼ inch and lengths is 2 inch..
Package includes ten each of bolts, hex nuts & washers.

Check Stock

Attwood 9091-5 USCG-Approved 27 Series Adjustable Hold-Down Marine Boat Battery Tray, Black

Heavy-duty, Non-corrosive black plastic. Inside Dimensions: 12-5/8 inch x 7-1/4 inch x 8-1/2 inch (WxDxH). Fits 27/27M Series Batteries.
Install with number 10 screwsMeets ABYC standard E-10 and U.S. coast guard requirements.
Includes adjustable-height crossbar and two retaining bolts.

Check Stock

Mount-It! VESA Mount Adapter Kit | TV Wall Mount Bracket Adapter Converts 200x200 mm Patterns to 300x300 and 400x400 mm | Fits Most 32 Inch to 55 Inch TVs | Hardware Included

VESA EXTENSION KIT: Bought a bigger TV but don’t want to buy another TV mount? This VESA adapter kit is designed to convert 200x200mm VESA patterns to 300x300 and 400x400 mm..
UNIVERSAL TV MOUNT ADAPTER: These TV wall mount extension brackets fit most 32” to 55” televisions with 200x200mm VESA patterns..
SOLID STEEL: Heavy-gauge steel construction with a 66lb load capacity. Please note, the actual load capacity might be limited to the mount capacity and not the VESA adapter capacity..
MOUNTING HARDWARE INCLUDED: Includes necessary hardware to connect to your mounting plate and TV. We included larger bolts to connect to your larger TV. This adapter kit 8 bolts to attach to your current VESA bracket and M6x30 (x4), M8x30 (x4) and 4 spacers for attaching your television..
EASY TO INSTALL: Includes installation instructions and standard hardware kit..

Check Stock

X AUTOHAUX 8pcs G1/4-20 Chrome Valve Cover Bolt for Chevy 283 302 305 307 327 350 383 400 Engines

Valve cover wing bolts fabricated of strong lightweight aluminum..
Valve cover wing bolts chrome anodized finish..
Meet OEM size with standard Y top 1/4 in. 20 X 5/8 in. L..
Extra long threads provide additional thickness.Washers and hold down tabs are not included with the wing bolts..
These wing bolts are highly durable and make valve cover removal fast and easy.Valve cover wing bolts includes 4 per set with set screws..

Check Stock

4 pc 3/8-16 x 5 Long Square-Neck Carriage Bolts Set w/Nuts & Washers,Zinc-Plated,Carbon Steel Grade 2,by Fullerkreg

Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole..
About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening..
Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee.
Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is 3/8 inch and lengths is 5 inch..
Package includes ten each of bolts, hex nuts & washers.

Check Stock

Hands Free Door Handle Opener, Foot Pull for Commercial, Office and Bathroom Hygiene & Virus Prevention (Black) Bulk Discounts

✔ 1/8" (4mm) thick aluminum with zero flex. Double the thickness of most competitors, which means this product will never bend and scrape on the floor.
✔ We use barrel bolts that fasten through both sides of the door for long lasting strength, instead of standard screws which will work their way loose overtime.
✔ Easy DIY installation on any non latching door (5 minutes or less), fits metal and solid doors of varying thicknesses.
✔ Soft door stoppers to prevent damage to walls, back plate prevents wear on door from shoe scuffs.
✔ Perfect for germ & virus prevention or opening doors with hands full. Comes with Barrel bolts and 3 different colored notification stickers for mens/womens bathrooms. Bulk discounts will automatically be applied at checkout.

Check Stock

Goldfire Motorcycle Handlebar Risers, 8\ Straight Challenger Risers Fits for H-D 1” Handlebar (8\ Balck)

Engineered to increase the rigidity and stability of the handlebar..
1" clamping area, works with any standard 1" handlebar..
Fits on all models with 3.5" center on center riser spacing (most H-Ds models) Base hole tapped for standard 1/2" * 13 mounting bolts (Bolts not included) (Standard Size)..

Check Stock

BEMIS 75 000 Commercial Open Front Toilet Seat with Cover, ROUND, Plastic, White

HINGES: Plastic Top-TITE hinges installs seat easily from above the bowl.
HARDWARE: Non-Corroding Hex-Tite Bolts and Wing Nuts.
FITS ALL ROUND TOILETS: Including Kohler, American Standard, TOTO and many more.

Check Stock