ReviewsBuy Welded Steel Pipe

VEVOR Safety Bollard 36 Inch Height Bollard Post 5.5 Inch Diameter Steel Pipe Safety Bollard Post Yellow Steel Bollard Steel Safety Bollard with 8 Anchor Bolts Perfect for Traffic-Sensitive Area

  • Security & Solidity: The welded and integral structure enables this safety bollard to withstand impact, releasing you from the harm caused by vehicle collisions, etc. This 36" height safety bollard, with the pipe diameter of 5.5" and pipe thickness of 0.12", is made of Q235 steel, ensuring high hardness, great strength, and durability..
  • High Visibility: This bollard post adopts striking yellow to alert pedestrians and vehicles, both day and night. The yellow and black around the top further increase visibility. Besides, the powder coating can adequately keep the bollard post away from wear and tear and extend its service life without harming the environment..
  • Stable Base Plate: The thickness of the steel bollard’s baseplate is 0.24", which is totally welded to the pipe. Compared with the hollow ones, ours can significantly increase the grounding area and achieve excellent stability..
  • Easy Installation: Installing this steel safety bollard won’t take you much time. All you need to do is to find the right place, drill the holes, tap into the anchor bolts and tighten them. We will provide you with the anchor bolts and wrench without extra fees..
  • Various Application: This safety barrier bollard is suitable for many applications. It will increase visi....
Check Stock

Big Gun Exhaust 10-1953 Gray One Size Exhaust Pipe EVO R Slip On

  • High-temp black thermal coated oval shaped aluminum muffler. TIG welded reinforced muffler bracket.
  • 304 stainless steel mid pipe/ head pipe. Black powder coated stainless steel end tip. Much lighter than stock exhaust.
  • Massive horsepower and torque gains. Sleek muffler design allows for maximum clearance. Vortex Quiet Insert included.
  • Removable screen-type USFS approved spark arrestor. Handmade in the USA. 1 Year Limited Manufacturers Warranty.
  • Removable screen-type USFS approved spark arrestor. Handmade in the USA. 1 Year Limited Manufacturers Warranty...
Check Stock

John Boos GT-8 Carbon Steel Grease Interceptor 14.2 Long by 11.2 Tall by 10.5 Wide 8 lbs Grease Capacity

  • This Grease trap has an 8 pound grease capacity and measures 14.2" Long by 11.2" Tall by 10.5" Wide. It measures 2" from top to pipe opening, 7.5" from pipe opening to base.
  • Made from TIG welded 11 gauge (1/8 inch thick) carbon steel with a corrosion resistant coating.
  • Grease Trap features a non skid cover (deck plate) with locking device and removable baffle ensure lid stays securely closed..
  • T-Vent Pipe (Flow Control Tee) is included. Both ends of the Grease Interceptor accept no-hub adapters for steel or plastic.
  • This commercial Grease Trap/Grease Interceptor is certified by the Plumbing and Drainage Institute.
Check Stock

Corona Hercules Post Hole Digger PD60000

  • Buckeye pattern features strong steel pipe handles welded to the square steel shanks and yoke.
  • Super tough square-cut steel blades are ideal for digging in heavy, rocky soils.
  • Returns will not be honored on this closeout item.
Check Stock

Seymour DG-16 6-1/2-Inch Post Hole Digger

  • Buckeye pattern features strong steel pipe handles welded to the square steel shanks and yoke.
  • Super tough square-cut steel blades are ideal for digging in heavy, rocky soils.
  • Returns will not be honored on this closeout item.
Check Stock

BestEquip 42-5.5 Safety Bollard, 5-1/2\ OD Safety Barrier Bollard, 42\ Height Yellow Powder Coat Pipe Steel Safety Barrier, with 4 Free Anchor Bolts, for Traffic-Sensitive Area

  • Welded Steel Construction: This safety bollard is made of Q235 steel features high hardness, great strength, and durability. Tube Thickness: 0.08 in/2 mm. Height: 42 in/106.6 cm. Welded and integral structure enables the bollard post to withstand impact..
  • Yellow Finish 5.5" O.D: The steel pipe safety bollard is highly visible and grabs attention due to its bright yellow finish and a black stripe on the top. The powder-coated finish guards the parking bollard against oxidation, UV rays, and fading or rusting. Diameter: 5.5 in/14 cm..
  • Stable Base Plate: Our traffic bollard adopts a sealed bottom design, increasing the grounding area. No need to worry about sand or cement oozing out the bottom. Base Size(L x W): 7.9 x 7.9 in/20 x 20 cm, Base Thickness: 0.2 in/5 mm. More stable and durable, not easy to deform..
  • Easy Installation: This guardian steel bollard is easy to install with four pre-drilled mounting holes in the base. It comes with four anchor bolts and a wrench. Assembly requires minimal energy and time..
  • Wide Application: This steel pipe bollard stands vertical to provide increased visibility and protection to entrances, parking lots, sidewalks, bike paths, and more. They are commonly used in traffic-sensitive areas..
Check Stock

BestEquip Safety Bollard 36-4.5 Safety Barrier Bollard 4-1/2\ OD 36\ Height Yellow Powder Coat Pipe Steel Safety Barrier with 4 Free Anchor Bolts for Traffic-Sensitive Area

  • Welded Steel Construction: This safety bollard is made of Q235 steel features high hardness, great strength, and durability. Tube Thickness: 0.08 in/2 mm. Height: 36 in/91.4cm. Welded and integral structure enables the bollard post to withstand impact..
  • Yellow Finish 4.5" O.D: The steel pipe safety bollard is highly visible and grabs attention due to its bright yellow finish and a black stripe on the top. The powder-coated finish guards the parking bollard against oxidation, UV rays, and fading or rusting. Diameter: 4.5 in/11.4 cm..
  • Stable Base Plate: Our traffic bollard adopts a sealed bottom design, increasing the grounding area. No need to worry about sand or cement oozing out the bottom. Base Size(L x W): 7.9 x 7.9 in/20 x 20 cm, Base Thickness: 0.2 in/5 mm. More stable and durable, not easy to deform..
  • Easy Installation: This guardian steel bollard is easy to install with four pre-drilled mounting holes in the base. It comes with four anchor bolts and a wrench. Assembly requires minimal energy and time..
  • Wide Application: This steel pipe bollard stands vertical to provide increased visibility and protection to entrances, parking lots, sidewalks, bike paths, and more. They are commonly used in traffic-sensitive areas..
Check Stock

HITBOX 4 in 1 Aluminum MIG Welder 200Amp 110V/220V Smart Control IGBT DC Inverter TIG Welder + MMA Stick Mix Gases Gasless Flux Solid Core Wire Welding Machine

  • 【ALL in ONE】 Smart welder for everyone. HITBOX 4 in 1 Function welder starts welding with a button! Choosing weld mode, material, weld wire,....
  • 【Multi-Material Weldable】HITBOX MIG200P inverter welder could weld aluminum, iron, carbon steel, stainless steel, etc. Applies to pipe....
  • 【MIG/MAG Welder】 1. MIXGAS can use 0.6 / 0.8 /0.9/ 1.0mm flux wire. With 0.6 / 0.8 / 1.0mm wire, it can be welded with a thickness of 0.6-3.4mm.....
  • 【TIG /WIG Welder】 Suitable for 1.6 mm and 2.4 mm tungsten. With 1.6 mm tungsten, it can be welded with a thickness of 1.0 to 4.8mm, and with 2.4....
  • 【MMA /ARC Welder】Current 40-170 amperes. 2.5 / 3.2 / 4.0mm electrodes can be welded. Welding thicknesses from 1.6 to 6.4 mm can be welded using....
Check Stock

Stainless 2.5" 90 Degree Mandrel Bend Elbow - 14GA/.078" Wall - 1.5" Leg - SS304 Stainless Steel Exhaust Elbow Piping for Car Exhaust Pipe Modified, Stair Handrail, etc - KOTVTM

  • 【Material】: SS304 Stainless Steel 90° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2.5 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, etc.
  • 【OD】: 2.5"/63mm, The outer diameter of the elbow is 2.5". Height（L): 5.51"/140mm.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

KOTVTM 2" Stainless Steel Elbow 45° Mandrel Bend Elbow - 1.5D/3" CLR Loose Radius - 16GA/.065" Wall - 2" Legs - SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Pipeline engineering, etc

  • 【Material】: SS304 Stainless Steel 45° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, Pipeline engineering, etc.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

KIMISS 3in Steel V-Band to V Band Downpipe Low 90 Degree with W/Flex Bellow O2 Bungs Plug

  • 【Double T.I.G welded construction】 —– Adopts double T.I.G welded construction, which is firm and durable in use.V-band downpipe low 90 degree with flex section..
  • 【Fitment】 —– Suitable for industry standard V-band outlet (down-pipe) flange with a 3in inner diameter and 3.7in outer diameter..
  • 【Very practical】 —– Features with strong impact resistance and scratch proof.This elbow designed makes the air flow smoother and reduces the resistance..
  • 【Original standard】 —– According to the original standard product design, the V-Band Downpipe is professionally manufactured, with high accuracy, stable performance, easy installation and use, and can replace the old or damaged!.
  • 【Buy With Confidence】 —– We offer clear pictures for your reference, please check the size, type and shape to make sure the item is that you need..
Check Stock