ReviewsC Mount Adapter Olympus

Briidea C-wire Power Adapter, Use for 24V Honeywell Home Thermostats, White

★The C-wire Power Adapter makes Honeywell Home smart thermostats compatible with most homes that don't have a common wire. Easily and quickly power connected thermostats that require a c-wire.
★The C-wire Power Adapter use for Wi-Fi, 24V Honeywell home thermostats when a common wire is needed but not present.
★Easy push terminals and an adhesive mount make installation easy and quick.
★Simple adhesive mount allows you to attach the adapter to the outdise of your furnace.
★Be discreet with a closed cover to conceal internal components and wires.

Check Stock

HumanCentric VESA Mount Adapter for Viotek Monitors GN27C, NB27C, NB32C, GN32C, GN32Q, and MSI Optix G24C, G241VC, G27C, G27C2, AG32CQ, MAG341CQ Monitors, VESA Adapter Monitor Mount

Fits select Viotek monitors and MSI monitors: This bracket is only guaranteed to work with GN27C, NB27C, NB32C, GN32C, GN32Q, and MSI Optix G24C, G241VC, G27C, G27C2, AG32CQ, MAG341CQ Monitors. Check your monitor model carefully. Some similar model numbers do not require a VESA adapter!.
VERY IMPORTANT NOTE: If your model number is Viotek NB32CW or NB32CB, this VESA mount adapter will not work with your monitors. These monitors are already VESA compatible without an adapter! Check your monitor instructions for more details. Make sure you match your EXACT model listed before making a purchase..
Mount your Viotek or MSI monitor on a standard VESA mount: Even though these monitors weren’t made with mounting holes, our convenient bracket enables you to connect your Viotek or MSI monitor anyway! Whether you’re looking to mount it on the wall or just get it off your desk, this bracket will let you connect your monitor in seconds. Works with double and triple (and more) mounts too!.
Easy installation: You’ll be able to install this bracket in less than two minutes with nothing more than a screwdriver! Just remove the existing base and snap ours in place instead - then connect it right to the VESA mount. We’ve tested our mount extensively to make sure i....

Check Stock

VILTROX EF-M2 II AF Auto Focus Lens Mount Adapter with 0.71X Reducer Speed Booster Converter Compatible for Canon EF Mount Lens to M4/3 Camera Panasonic and Olympus

【Compatibility】VILTROX EF-M2 II Lens Mount Adapter Allow compatible with Canon EF mount series lens to be used on M4/3 camera. Panasonic : GH5S/GH5/GH4/GH3/GH2/GH1/GF9/GF8/GF7/GF6/GF5/GF4/GF3/GF2/GF1/ GX85/GX8/GX7/GX1/G7/G6/G3/G2/G1.
Olympus : E-M10/E-M10II/E-M10III/E-M5II/E-M5/E-M1/E-PL8/E-PL7/E-PL5/E-PL3/E-PL2/PEN-F/E-PM2/E-PM1/E-P5/E-P3/E-P1..
【Support AF Auto Focus Function】Viltrox EF-M2II lens adapter comes with the gold-plating contact, which can help to connect compatible with Canon EF mount series lens to M4/3 Cameras, auto focusing perfectly..
【Support Aperture Control and 0.71x Focal Reducer Booster 】Designed with internal aperture motor, you can adjust the aperture from camera end directly to control the lens’ actual aperture. Plus 0.71 based on the original focal length , which help enlarge 1 level aperture..
【EXIF signal transmitting & IS Function】EF-M2 II can transmit the EXIF signals to your camera and display the current information on the screen.( like Aperture, Shutter Speed, Exposure parameters, etc. ),and with Built-in IS function, making your focus much more precise and clear..
【USB Firmware Upgrade】Equipped with USB interface, can realize software upgrade. Can perfect new functions of the lens mount adapter and....

Check Stock

RedTagCanada MASD-1 microSD Attachment MASD-1 TF to XD 25 x 22 x 2mm Insert Card Adapter for Olympus (2, TF to XD Card Adapter)

Size:25 x 22 x 2mm(L x W x H), MASD-1 micro SD attachment for Olympus.
compact and portable, Prevent your camera and card from damage.
Insert Card Adapter for Olympus, memory card is not included..
MASD-1 adapter also can not read by the general card reader, need to use the camera DATA USB Line to read the photo, or remove the TF card into the MicroSD adapter and read it by general card reader..

Check Stock

Neewer 1/4” Camera Hot Shoe Mount with Additional 1/4” Screw 2-Pack, Mini Ball Head Hot Shoe Mount Adapter for Cameras, Camcorders, Smart Phone, Video Light, Microphone, Ring Light - ST17

【Mini Ball Head】 Securely mount on your camera via the cold shoe adapter. The 1/4” screw allows you to mount a wide range of devices, such as LED fill light, LED flash, field monitor, and other accessories with a 1/4” threaded hole. The adjustment knob tightly locks the ball joint.
【Wide Compatibility】 Standard 1/4” hot shoe adapter is compatible with most digital SLR cameras, such as Sony, Canon, Nikon, Olympus, Pentax, Panasonic, Fujifilm, and more.
【Flexible Positioning】 The ball head can be adjusted to almost any position, and it can be quickly locked with the adjustment knob.
【Sturdy & Durable】 The maximum load capacity is 3.3lb/1.5kg. Made of sturdy aluminum alloy and stainless steel, the lightweight mini ball head is sturdy, durable, and corrosion-resistant.
【Package Contents】 Neewer Mini Ball Head 2-Pack, Two Hex Keys, Two 1/4” Screws.

Check Stock

High Grade - USB Cable for Olympus Digital Cameras - USB Cable CB-USB5/CB-USB6 - Works with Olympus by Master Cables

Also Works with Olympus model C170, C180, C480, C500 Zoom, C5500, C7000, C-170, C-180, C-480, C-500 Zoom, C-5500 SportZoom, C-7000,.
The USB Cable is for image transfer from your camera to computer, this cable can be also used with a wall charger to charge your battery.
Suits: Olympus FE-4020, FE-4030, FE-4040, FE-5030, Mju 7040, Mju 7050, Mju 9010, Tough 3000, 6020, 8010, SP-100, SP-100EE, SP-620UZ, SP-720UZ, SP-800UZ, SP-810UZ, SZ-10, SZ-11, SZ-12, SZ-14, SZ-20, SZ-30MR, SZ-31MR,.
Stylus 5010 / 7030 / 7040, DZ-105, SH-1, SH-2, SH-21, SH-50, SH-60, SZ-16, SZ-17, TG-1, TG-3, TG-4, TG-310, TG-320, TG-610, TG-620, TG-805, TG-810, TG-820, TG-835, TG-850, TG-860, X-940, X-960, XZ-1, XZ-2, XZ-10 Digital Camera.

Check Stock

Flashpoint XPLOR 400PRO TTL Battery-Powered Monolight with Built-in R2 2.4GHz Radio Remote System with Bowens Mount Adapter - Godox AD400 Pro

|Wide Mount Compability|: Godox AD400Pro Comes with a Bowens Mount Adapter Ring to Install Bowens-mount Accessories. Remove it, You Can then Use the....
|Great TTL Auto Flash Compatibility|: Godox AD400Pro is Compatible with Canon E-TTL II, Nikon i-TTL Autoflash, Sony, FUJIFILM, Olympus and Panasonic....
|All-in-One Outdoor Flash|: 400Ws Strong Power, 0.01-1s Recycle Time, 12 Continuous Flashes in 1/16 Power Output, 30W LED Modeling Lamp, 390 Full....
|Two Power Supply Methods|: 21.6V/2600mAh large capacity Professional lithium battery pack provides 390 full power flashes and recycle in 0.01-1....
|Small, Light Weight and Portable|: Godox AD400Pro weights 2.1Kg with the small size of 220*102*128 mm(without the flash tube and reflector). With....

Check Stock

K&F Concept Lens Mount Adapter Ring Compatible with Canon FD Lens to Micro Four Thirds M4/3 Olympus Pen and Panasonic Lumix Cameras

Surface for effortless mount,infinity focus allowed..
Made of brass and aluminum (not plastic), anodized aluminum construction..
Please note: It is not same between FD mount and EF mount, this adapter ring is only compatible for Canon FD mount lens, please contact us if you want to purchase compatible for Canon EF mount lens..
Compatible Cameras (Including, but not limited to): Olympus PEN E-PL1, E-PL1s, E-PL2, E-PL3, E-P2, E-P3, E-M, OM-D, E-M5, E-M10, Panasonic Lumix DMC-G1, G2, G3, G10, GX1, GH1, GH2, GF1, GF2, GF3, GF5, GH4, Panasonic AG-AF100 Mirrorless Digital Cameras..
Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity..

Check Stock

3PCS Camera Flash Stand Speedlight Hot Shoe Mount Stand, with 1/4\ Metal Tripod Thread for Speedlite Canon Nikon Sigma Pentax Olympus Panasonic Metz Nissin Yongnuo

Black Hot Shoe Flash Light Base Mount Stand Holder..
Compatible with Canon Nikon Pentax Sigma Olympus Panasonic Yongnuo Metz Flash Light, Flashgun.(Note:this adapter don't fit Sony and Minolta flash ).
Has the same little hole in the slot so that the locking pin on the Speedlight will lock onto the stand.1/4"-20 screw thread in the base, can be mounted on camera tripods..
Package Included: 3 x Flash Light Hot Shoe Base Stand Holder Mount. Size: 9.2 x 6.2 x 0.9cm (3.6 x 2.4 x 0.35in).

Check Stock

SLOW DOLPHIN Photography Super Clamp with Camera Clamp Mount Ball Head Clamp and Mini Ball Head Hot Shoe Mount Adapter with 1/4'' -20 Tripod Screw for Monitor, LED Lights, Flash Light,Microphone

Package include:(1)x Photography Super Clamp (1) x Camera Hot Shoe Mount with 1 x swiveling ball-head, 1 x hot shoe adapter, 1 x 1/4" screw and 1 x wing nut.
Photography Super Clamp with 1/4'' and 3/8'' Thread Clip for DSLR,Cameras, Light Stand , Rods,Lights, Umbrellas, Hooks, Shelves, Cross Bars rod ,Can clip items from 0.55" to 2.16" ,Super clip made with non-slip rubber pad inside, increase the friction and reduce the scratch of the pole, more stable and secure, .prevent your application from slipping and scratching.
Photography Super Clamp allow you to attach more accessories such as fix a ball head on it to connect your led light,action camera,microphone. And there are more setup choices to install your camera photo accessories..
The Camera Hot Shoe Mount cold shoe adapter works for most cameras including Canon, Nikon, Olympus, Pentax, Panasonic, Fujifilm, Kodak, tripod, LED video light, flash light, LCD monitors and other accessories with 1/4" screw thread.
The Camera Hot Shoe Mount is lightweight but made of sturdy Aluminum Alloy and precise CNC process anodized aluminum materials, sturdy and durable,it won't be easy to suffer corrosion or breakage..

Check Stock

SLOW DOLPHIN Photography Super Clamp with Camera Clamp Mount Ball Head Clamp and Mini Ball Head Hot Shoe Mount Adapter with 1/4'' -20 Tripod Screw for LCD Monitor, LED Flash Light,Microphone (2 PCS)

Package include:(2)x Photography Super Clamp (2) x Camera Hot Shoe Mount with 2 x swiveling ball-head, 2 x hot shoe adapter, 2 x 1/4" screw and 2 x wing nut.
Photography Super Clamp with 1/4'' and 3/8'' Thread Clip for DSLR,Cameras, Light Stand , Rods,Lights, Umbrellas, Hooks, Shelves, Cross Bars rod ,Can clip items from 0.55" to 2.16" ,Super clip made with non-slip rubber pad inside, increase the friction and reduce the scratch of the pole, more stable and secure, .prevent your application from slipping and scratching.
Photography Super Clamp allow you to attach more accessories such as fix a ball head on it to connect your led light,action camera,microphone. And there are more setup choices to install your camera photo accessories..
The Camera Hot Shoe Mount cold shoe adapter works for most cameras including Canon, Nikon, Olympus, Pentax, Panasonic, Fujifilm, Kodak, tripod, LED video light, flash light, LCD monitors and other accessories with 1/4" screw thread.
The Camera Hot Shoe Mount is lightweight but made of sturdy Aluminum Alloy and precise CNC process anodized aluminum materials, sturdy and durable,it won't be easy to suffer corrosion or breakage..

Check Stock