ReviewsCable Bushing

Morris 22350 Snap Bushings with Shutters, 1-Inch, Black, 10-Pack

Electrical Snap Bushings with Shutters - Our Snap Bushings with Shutters are simple to install..
Flexible shutters to accommodate a variety of cable & hose sizes from a minimum of 1/8” to a maximum as shown in the table.
Snap bushings with shutters absorb vibration & cushion cables, tubes, etc..
Fingertip pressure snap-locks the bushing into the mounting hole.
Universal design to hold various cable ranges.

Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
The OEM Tools bushing driver set includes 20 different size cups for versatile use.
ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
Don’t have to remove components from vehicles with this bushing tools set.
ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
Cups with bushing press and pull kit allow for hundreds of combinations.

Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....

Check Stock

Rugged Ridge 18305.10 Transfer Case Lowering Kit; 87-06 Jeep Wrangler YJ/TJ

【HIGH QUALITY】Long life-span matters, that is why our cable is made of high-quality material which prevent rust and premature failure to ensure it can work for a long time.
【DESIGN】The transfer cable linkage shifter uses a clevis mount on both ends of the cable to align the push/ pull force directly in line with the cable, providing a much more robust double shear force.
【FEATURE】The transfer case cable shifter get rid of the problematic stock shifter linkage, to provide a smooth Shifting for your car.
【FITMENT】Works on 1997-2006 Wrangler, only fits the 231 transfer case, will not fit a Rubicon. The gear shift linkage bushing kit is attaches to the base of the OEM handle and the bracket is coated with black powder, which is not easy to rust.
【12-MONTH WARRANTY】If you have any other questions about transfer case shift cable conversion kit, please contact us anytime and we will be glad to assist you. Your satisfaction is the direction we have been working towards.

Check Stock

Transfer Case Cable Shift Linkage Upgrade Heavy Duty for 1997-2006 Jeep Wrangler TJ

【HIGH QUALITY】Long life-span matters, that is why our cable is made of high-quality material which prevent rust and premature failure to ensure it can work for a long time.
【DESIGN】The transfer cable linkage shifter uses a clevis mount on both ends of the cable to align the push/ pull force directly in line with the cable, providing a much more robust double shear force.
【FEATURE】The transfer case cable shifter get rid of the problematic stock shifter linkage, to provide a smooth Shifting for your car.
【FITMENT】Works on 1997-2006 Wrangler, only fits the 231 transfer case, will not fit a Rubicon. The gear shift linkage bushing kit is attaches to the base of the OEM handle and the bracket is coated with black powder, which is not easy to rust.
【12-MONTH WARRANTY】If you have any other questions about transfer case shift cable conversion kit, please contact us anytime and we will be glad to assist you. Your satisfaction is the direction we have been working towards.

Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.

Check Stock

Rugged Ridge 18676.60 Transfer Case Slip Yoke Eliminator (SYE) Kit, NP231; 88-06 Wrangler, Black

【HIGH QUALITY】Long life-span matters, that is why our cable is made of high-quality material which prevent rust and premature failure to ensure it can work for a long time.
【DESIGN】The transfer cable linkage shifter uses a clevis mount on both ends of the cable to align the push/ pull force directly in line with the cable, providing a much more robust double shear force.
【FEATURE】The transfer case cable shifter get rid of the problematic stock shifter linkage, to provide a smooth Shifting for your car.
【FITMENT】Works on 1997-2006 Wrangler, only fits the 231 transfer case, will not fit a Rubicon. The gear shift linkage bushing kit is attaches to the base of the OEM handle and the bracket is coated with black powder, which is not easy to rust.
【12-MONTH WARRANTY】If you have any other questions about transfer case shift cable conversion kit, please contact us anytime and we will be glad to assist you. Your satisfaction is the direction we have been working towards.

Check Stock

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

PERFECTLY MATCHED MULTIPLES: The DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16” to 1” Inch includes a wide range of porter cable style bushing sizes designed to allow full flexibility between router bit cutter and various templates.
COMMON SIZES: Standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches).
Fits 1/4-inch and thinner template material.
Each of the 8 guides have the following outside and inside diameters (OD/ID) – 5/16-inch OD 1/4-inch ID.
IMPROVED CONSTRUCTION: Constructed from solid brass to resist vibrating loose and resist water and moisture.
When inferior steel bushings touch a rotating router bit (i.e. tapered dovetail bit), sparks fly and the router bit will likely be ruined.
These solid brass bushings will prevent damage to the bit and the bushings themselves.
EASY STORAGE: Heavy-duty 8.5” x 2” x 6.5” (21.6cm x 5.1cm x 16.5cm) plastic blow-molded....

Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....

Check Stock

DNM Mountain Bike MTB Air Rear Shock Rebound/Remote Lock Out/Air Compression Pressure Adjustable AL 7075 Shaft/AL 6061 Shock Body 210mm Travel 53 mm/w Extra Bushing Hardware

210 x 53 mm (8.27 x 2.09 inch). Weight: 267g =0.58lbs (152mm).
308g =0.68lbs (210mm). Remote lock out cable length: 1750mm=68.9inch..
COURTESY BUSHING HARDWARE INCLUDED: Top Busing Size : 8mm x 24mm. Bottom bushing size : 8mm x 24mm. We have included an additional set of bushing hardware (8mm x 50mm) to fit bikes with different suspension systems..
Weight 120 lbs - Main air chamber 90 Psi. Weight 140 lbs - Main air chamber 105 Psi. Weight 160 lbs - Main air chamber 120 Psi. Weight 180 lbs - Main air chamber 135 Psi. Weight 200 lbs - Main air chamber 150 Psi. Weight 220 lbs - Main air chamber 165 Psi..
ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide one year warranty ! Made in Taiwan..

Check Stock

YORK 1CK0603/473-22388-001 Masonry Chimney Draft Hood KIT

USED ON UPFLOW AND COUNTERFLOW(DOWNFLOW)INSTALLATIONS ONLY.
INCLUDED IN KIT:CHIMNEY KIT, LIMIT SWITCH, BUSHING, WIRE CLIP, CABLE STRAP, WIRE HARNESS, INSTRUCTION MANUAL.

Check Stock