ReviewsCable Clamping

BESSEY KRE3550 PAIR 50' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 50" KRE3550 clamps: 50" of clamping capacity, a 3-3/4" throat depth, a 10" to 52-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

Pyatofyy 4 Pack T-Track Clamp, T Track Hold Down Clamps Kit Compatible with 3018-,3018-PROVer,1810- CNC Router Machine

  • Adjustable 3 gears, high, medium and low, different clamping force suitable for different working condition..
  • Constructed of high quality aluminum alloy and stainless steel provides the hold fast clamps with maximum durability and strength..
  • Maximum clamping is 60mm, the clamping height can be adjusted according to the thickness of the board..
  • Quick and easy clamping,slide the bench hold down clamp into your workbench dog hole, hold wood in place and then press the gear,easier clamping,reduce hand fatique.
  • Use with your workbench,works best on workbenches 20~40mm thickness(maximum clamping 60mm),Drill a suitable vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole..
Check Stock

Triton SuperJaws SJA100E Portable Clamping System

  • Robust, powder-coated, all-steel construction for long-lasting service life.
  • Powerful 2200 ft.lbs clamping force for controlled clamping pressure.
  • Foot-operated clamping allows hands-free operation.
  • Extra-wide tripod base maximises stability for large workpieces.
  • Reversible sliding jaws allow extra-wide clamping width capacity, up to 37 1/2".
Check Stock

Moukey Boom Mic Stand & 10ft XLR Mic Cable 6 Pack

  • 【MIC STAND】Short Boom Mic stand with T-handle - Moukey mic stand desk designed with a boom arm to adjust length and angle based on different necessaries. Metal T-handle adjustment for secure boom positioning.
  • round boom design with large clamping area. The MAXIMUM bearing weight is 1.1lb. Unique dents anti-slip microphone clip holds your microphone firmly..
  • 【MIC STAND】Stable Base with Non-slip Rubber - The weight of the round base makes this microphone stand very stable. Three rubber pads on the bottom for moving without any noise, leaving scratches on the table or floor..
  • 【MIC STAND】Flexible Height Adjustment - This table mic stand height adjustment ranges from 8.66 inches to 14.17 inches with geared lock, making your microphone stable and perfectly positioned at a comfortable height and distance..
  • 【MIC CABLE】No Noise - Made of oxygen-free copper (OFC) conductors, plus a PVC protective cover, which can effectively enhance signal clarity and reduce electromagnetic interference (EMI) and noise..
  • 【MIC CABLE】Durable XLR Cable -High-quality metal and plastic shell, High strength, wear-resistant and durable, tensile strength is not easy to break..
Check Stock

Barb Clamp Rohr Clip - Hose Clamps 10pcs Adjustable Double Wire Water Hose Barb Clamp Pipe Clip Hoop Plumbing Fastener(25mm(21-25))

  • 【USEFUL AND PROVIDE GREAT CLAMPING FORCE】:Double wire designed screw clamps are very useful and provide great clamping force.Convenient to use, simply release and tighten the screw to adjust the clamp diameter.
  • 【SMOOTH EDGES】:The smooth edges of the round wire are harmless to hands or hosesDouble steel wire are more stronger and can be used for long time fastening.
  • 【Widely used】: Prevent hose extrusion with the hose clamp. Steel wire band is more stronger for long time fastening use, Ideal for industrial or home use, help to lessen pressure and protect the hose..
  • 【Functionality】: Ring hose Clamps designed to provide a secure and flexible option for connecting pipes to dust hoods, blast gates and other dust collection fittings.
  • 【MATERIALS】:These hose clamps are made of stainless steel and the surface is plated with ....
Check Stock

BLACK+DECKER Workmate Portable Workbench, 550-Pound Capacity (BDST11000)

  • Quick clamping with flexible clamping options.
  • Heavy gauge steel frame for up to 550 lbs. workload.
  • One Hand quick folding – easy and compact.
Check Stock

24 pcs 24K Gold Speaker Banana Plug Audio Jack Connector

  • High quality Ytuomzi banana plug 24 k gold plated. High clamping force by the spring mounted blades.
  • Pure Copper, gold plated, Pure copper made, non magnetic. Package include 24 PCS banana plugs (12 red and 12 black marks).
  • Total length 46 mm External diameter 11 mm, double screwed connection by means of 2 fixing screw.
  • Accommodate cable with wire size up to 4mm, Double screws locking, no soldering, Accepts 8AWG to 20AWG speaker wire.
Check Stock

IRWIN QUICK-GRIP C Clamp, 8-Inch (225108)

  • Larger handle on this c-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue..
  • Double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps..
  • For woodworkers, carpenters, welders, builders, or do-it-yourselfers. Suitable for general clamping needs..
  • Larger swivel pad reduces marring on work surface and increases stability..
Check Stock

LAOA Vise-Grip with Wire Cutter Original Locking Tool 5-Inch Curved Jaw Locking Pliers Clamping plier Pipe Wrench

  • LAOA Vise-Grip with Wire Cutter Original Locking Tool 10-Inch Curved Jaw Locking Pliers Clamping plier Pipe Wrench.
Check Stock