ReviewsCable Pipe Clamps

Single Ear Hose Clamps, VIGRUE 100Pcs 6-28.6mm Hose Clamps 10 Sizes with Ear Clamp Pincer 304 Stainless Steel Stepless Hose Clamps for Securing Pipe Hoses and Automotive Use

100% 304 Stainless Steel:All the VIGRUE TUV approved High precision single ear stepless hose clamps including the band, housing and screw are made of 100% high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use. You will no longer worry about them rusting and breaking..
360° Stepless Sealing: Special cochlear design provides a strong thermal expansion compensation function, which compensates for the dimensional change caused by the change of the hose, so that the pipe is always in a good sealing and fastening state. Without any steps or gaps in the crimp clamp, inner circumference assurance the hose uniform surface compression,the clamping effect is obvious and stronger than that of the traditional screw type clamp..
Practical and Easy to Use:These clamps are locking secure and tight.Used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor..
Convenient Plier Tool: An useful Ear Clamp Pincer are included in this kit, with plastic coated handle, whi....

Check Stock

Wire Rope Clamp 3/16 inch 24 Pack Zinc Plated - Wire Rope Clip - Wire Cable Clamps - Yardware etcetera

Wire cable clamps are perfect for rigging rope, wire and cable in unlimited applications mainly in rigging, temporary guardrail systems, securing loads, hanging banners, flags and signs and basically anything that involves cables.
Malleable Electro-Galvanized Wire Rope Clips for Light Duty Applications.
The group of wire rope clamps works with 3/16 cable. Best method for securing cables and rope.
Some examples of applications in which these are used are: securing patio or porch furniture, safetying pipe, anchoring posts, squaring fence gates, making laundry lines, hanging banners, anchoring gym equipment, and endless other applications..

Check Stock

ISPINNER 12pcs 304 Stainless Steel Adjustable 27-102mm Range Worm Gear Hose Clamps Assortment Kit 2 Inch, 3 Inch, 4 Inch (Silver)

HIGH QUALITY - All the hose clamps including the band, housing and screw are made of 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
WIDE SIZE RANGE- 4pcs 2 Inch(27-51mm), 4pcs 3 Inch(52-76mm), 4pcs 4 Inch(78-102mm)..
PACKAGE - 12pcs stainless steel hose clamps assortment kit with 3 sizes. Packed in a durable handy case..
WIDELY USED- Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor and outdoor..
ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..

Check Stock

Rockler HD Pipe Clamp Rack – Rack Helps to Store Heavy Duty Clamps – 12 Gauge Galvanized Steel Pipe Clamps – Store Full Rack of Clamps up to 60” Long - Garage Workshop Organizers & Storage

Rockler HD Clamp Rack: The customary way of storing pipe clamps in a jumble in the corner is certainly inexpensive, but it can be equally irritating. Easily store up to 60” heavy clamps at eye level and organized into two neat rows with our HD clamp rack..
Perfect For Storage: Trying to untangle one clamp from the rest is a chore that can result in the whole pile crashing to the floor..
Workshop Organization: With the Rockler HD pipe brackets clamp rack, you can say goodbye to untangling clamps! This quick clamps garage tool rack features stepped slots that accept both pipe clamps and parallel clamps..
Secure Hold: These racks are heavy-duty and hold woodworking pipe clamps securely. The clamps will not fall off even if bumped. The installation of these rack tool holders for your garage wall are pretty easy, it just requires lag bolts..
High Quality: This large pipe clamp storage rack is made of sturdy, 12 gauge steel & can support a full rack of bar clamps up to 60'' long. The footprint is very compact, saving you both wall space and floor space..

Check Stock

ISPINNER 20FT DIY Hose Clamp, 304 Stainless Steel Band Clamp with 8 Fasteners Kit Adjustable Large Worm Gear Hose Clamp Pipe Clamp for Dust Collector, Plumbing and Fuel Line (20 Feet)

✅【DIY HOSE CLAMPS】Determine your own hose clamp sizes! These adjustable DIY Worm Gear Hose Clamps have 20FT strap with 8 fasteners, which can be trimed to specific length according to your own use. No worry about running around looking for a suitable clamps!.
✅【HIGH QUALITY】All the hose clamps including the strap, fastener and screws are made of high quality 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable. When installed on the pipe, you will no longer worry about rusting and breaking..
✅【EASY TO USE】Cut the hose clamp strap into the length you want, then insert the strap through two holes of the fastener and adjust the size. Hose clamp ar completed! Use them on the pipes by tighten or loosen the screw..
✅【WIDELY USED】These DIY hose clamps can be used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat, marine, shield, dryer vent, household etc. both indoors and outdoors..
✅【PACKAGE】20ft Strap with 8 Fasteners packed in a delicate plastic case..

Check Stock

ISPINNER 12pcs 304 Stainless Steel Adjustable 27-102mm Range Worm Gear Hose Clamps Assortment Kit 2 Inch, 3 Inch, 4 Inch (Black)

HIGH QUALITY - All the hose clamps including the band, housing and screw are made of black coated 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
WIDE SIZE RANGE- 4pcs 2 Inch(27-51mm), 4pcs 3 Inch(52-76mm), 4pcs 4 Inch(78-102mm)..
PACKAGE - 12pcs stainless steel hose clamps assortment kit with 3 sizes. Packed in a durable handy case..
WIDELY USED- Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor and outdoor..
ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..

Check Stock

Heavy Duty Pipe Clamp Jaws, 1 inch Heavy Duty Pipe Clamp Vise Fixture Set Wood Gluing Pipe Clamp Fixture Woodworking Cast Iron Clamp for Metalworking, Woodworking and Frame Assembly

GREAT CHOICE FOR WOODWORKING: This jig is perfect for woodworking work on cabinets and crates. Woodworking cast iron clamps with ergonomic handles make clamping easier and reduce hand fatigue.
HIGH QUALITY PERFORMANCE: The pipe clamps are made of solid cast steel, durable and sturdy. Keeps wood stable as you work, a great addition to any woodworking bench in your home or shop.
EASY TO USE: The woodworking jig is easy to handle. Just slide the tailgate over the pipe on the other end. Then put the coil spring stopper on the pipe thread at the end of the pipe to prevent the end from sliding out of the pipe during adjustment and away from the clamped workpiece.
HIGH QUALITY CAST STEEL MATERIAL: The pipe clamps are made of high hardness and high quality cast steel material, which is durable enough to meet the needs of your daily work. Wide range of uses, can be used as wooden clips, water pipe clips, plastic clips.
WIDE USE: Woodworking pipe clamps measure 1" and weigh 1760g/62.1oz (approx.). Often used in metalworking, woodworking and frame assembly, from DIY to industrial product....

Check Stock

OhLectric OL-38707 High-Conductivity Ground Pipe Clamp - Made of Copper Alloy - Connecting Grounding Electrodes to Water Pipes Clamp - Non-Direct Burial Pipe Clamp - ½ Inch - 1 inch Pipe Range

TOP QUALITY: Constructed using premium quality copper alloy, these copper ground clamps are extremely durable with high strength and are built to last for a lifetime. Our pipe clamps are designed to fit and organize in a safe manner with the maximum flexibility to suit your needs!.
MULTIPURPOSE: These pipe ground clamps are an excellent choice for either clamping the pipes to the grounding electrode or you can even use these clamps to securely mount the pipes on walls. It can also be used for connecting bare wires to pipes or steel water pipe or tubing..
CORROSION FREE: The ground clamp for pipe can be attached to the grounding electrode and the pipe by the means of indirect burial with the screws provided. To prevent rusting, the screws are coated with zinc plated steel alloys which totally eliminates the chances of corrosion on the clamps..
SAFETY TESTED: All our products are certified by Culus for their safety and specification standards set by them. We follow every step to ensure all the housing rules and regulations are followed as we value customer satisfaction and safety more than anything else..
ADAPTABLE FIT: These pipe grounding clamps come in a variety of sizes which are well equipped for all wire ranges between 2-10. And also they support all....

Check Stock

Boao 4 Pieces Adjustable 304 Stainless Steel Duct Clamps Hose Clamp (12 Inch)

Package includes: 4 pieces 12 inch hose clamps.
Material: made of 304 stainless steel, corrosion-resistant, will not rust for long-term use.
Function: can lock the hose very tightly, leak-proof, and ensure of clamps long lasting, quad lock construction.
Easy to use: use a screwdriver to loosen or tighten the screw of hose clips then adjust the size, secures ducting tightly in place (the screwdriver not included).
Wide application: these dust clamps can be applied to secure hoses, pipe, cable, tube, fuel lines in domestic applications, automotive, industrial, boat, etc..

Check Stock

KOTTO Pex Crimping Clamp Cinch Tool and Pipe Hose Cutter Meets ASTM 2098, Pipe Fitting Tool Kit for Stainless Steel Clamps Sizes from 3/8\ to 1\ with 20pcs 1/2\

➤【HIigh Quality】- Camtek cable clamps are made of 304 stainless steel material with quality rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. The clamps are sturdy, strong and reliable. The rubber insulation on the clamp is pliable which protect the tube well and keeps the clamp securely in place..
➤【What You Get】- 52pcs cable clamps assortment kit with 6 sizes in a storage box, easy to store and carry, it includes: 12pcs 1/4inch (6mm), 10pcs 5/16inch (8mm), 10pcs 3/8inch (9mm), 8pcs 1/2inch (13mm), 8pcs 5/8inch (16mm) and 4pcs 3/4inch (19mm)..
➤【Wide Applications】- Stainless steel cable clamps are perfect to apply in automotive, industrial, boat/marine, windshield, household, etc., for wiring, cables, pipe, rack, line management and restoration. No matter in salt water/air environment..
➤【Easy To Install】- The R-Style design makes the clamps stylish, flexible and innovative. Easy to twist, bend, manipulate when install. You only need M5 (5mm) or M6 (6mm) bolt and nut to easily complete your installation work..
➤【Friendly After-Sale Service】- We strive to offer the 100% satisfaction for all our customers. Please don't hesitate to contact us if you are not satisfied with your purchase..

Check Stock

25 Pack Stainless Steel Hose Clamps, 1/4 inch to 1/2 inch Worm Gear Metal Hose Clamps for Pipe, Dryer Repair, Tubing and Fuel Line

Adjustable hose clamps are high torque, adjustable from 1/4 - 1/2 inch (6-12mm), ideal as 1/4 inch pipe clamps, 3/8 inch tube clamps, 1/2 inch screw clamps, etc..
Metal clamps are all premium 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals, the worm drive hose clamps comply with SAE standards, when installing on the pipe, you will no longer worry about them rusting and breaking..
Pipe clamp for a variety of applications for marine, auto, water pipes, fuel lines, dryer, vent, radiator, etc. to meet your needs in different applications..
Easy to install, use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
You will receive 25 pieces of 1/2 to 1/4 inch hose clamps and if for any reason you are not satisfied with your purchase, please contact us for a lifetime refund or exchange!.

Check Stock