ReviewsCable Splicer

Beduan Brass Hose Barb Reducer 5/16 to 1/4 Barb Hose ID Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel 4Pcs

  • Material: Brass. Connections: 5/16" x 1/4".
  • Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check Stock

Legines Brass Hose Barb Fittings Assortment Kits Splicer + Male Coupler + 90 degree Male Elbow 65 Pcs

  • Splicer : 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5).
  • 90 Degree Male Elbow: 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT(4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNP(2) 1/2" barb to 3/8" MNPT(2).
  • Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2).
Check Stock

Quickun Brass Hose Barb Reducer 3/8 to 1/2 Barbed Reducer Fitting Reducing Splicer Mender Union Adapter for Air Water Fuel Pack of 3

  • Material: Brass. Connections size: 1/2" x 3/8".
  • Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check Stock

TEKTON 10-1/2 Inch Fencing Pliers | PSP10010

  • STAPLE AND NAIL PULLER: The parallel jaws can grip the crown of a staple or the head of a nail and easily pry them out.
  • WIRE SPLICER: Use the top and bottom jaws to isolate two strands of wire for splicing or separating.
  • the bottom jaws are large enough to grip and twist multiple strands of wire.
  • STAPLE STARTER: Use the two jaw openings to hold a staple in place and drive it with a hammer.
  • start a staple with one hand by gripping it in the upper jaws and swinging it into the post.
  • STRIKING FACE: The flat surface is less prone to chipping and deformation than a serrated surface.
  • hit the striking face with a hammer to drive the claw under a staple.
  • STAPLE CLAW: The longer, more pointed claw gives better access for prying out staples.
Check Stock

Fence Stretcher Splicer,Fence Wire Tighten Tools, Wire Fence Tightener, Iron Metal Barbed Wire Fence Fixer Stretcher Tool, Fence Barb Wire Repair Tool

  • tighten any fence such as high tensile, barbed wire, or smooth wire.
  • easy to use, ratchet action , easily swivel for left and right handed operation..
  • Heavy-duty Carbon Steel Structure，Strong Pulling Power.
  • If you have any problem about it, please feel free to contact us.
  • Fence Stretcher Splicer,Fence Wire Tighten Tools, Wire Fence Tightener, Iron Metal Barbed Wire Fence Fixer Stretcher Tool, Fence Barb Wire Repair Tool.
Check Stock

Beduan Brass Hose Barb Reducer 5/16 to 3/16 Barb Hose ID Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel With 8 Hose Clamp Pack of 4

  • Material: Brass. Connections: 5/16" x 3/16".
  • Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check Stock

JENSWILL 1 Stainless Steel Hose Barb Fitting Tee 3 way Barbed Splicer Mender Union Fitting with 3PCs Hose Clamp for Oil Water Air

  • Material - Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Feature - Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve (3pcs hose clamp free as gift)..
  • Working Temperature & Pressure - Maximum working pressure of 2800 psi.
  • Temperatures range from -868 to 1472 ℉/-500 to 800 °C..
  • Widely Use - Application of our barb splicer is very wide. Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

JoyTube Brass Hose Barb Fitting Metals Splicer Mender 1/4 Barb Hose Union Fuel Gas Water Air Pack of 12

  • Connections: 1/4” to 1/4”. Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart. Our barb union will provide good seal when you use it to connect hose..
  • Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) ..
  • Connects to a hose on both ends. Union coupling for connecting two hoses with the same diameter in a straight run..
  • Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include)..
Check Stock

Da by 3 pcs 3/8\(10mm) Barb Splicer Mender Hose Brass Barb Fitting with 6 pcs Stainless Steel Pipe Clamps for Water/Fuel/Air

  • Packaging Includes：3 PCS Two-Ways Brass Hose Mender, 6 PCS Stainless steel pipe clamps..
  • Size: The outer diameter of the hose barb is 3/8"(10mm), Suitable for connecting 3/8"(10mm) inner diameter hose..
  • Material: Hose barb splicer mender made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
  • Solid Connections:The hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
Check Stock

Outwater 8’ Bar Foot Rail Kit – Complete Undercounter Mount Hardware and Tubing, Oil Rubbed Bronze Finish

  • RESIDENTIAL AND COMMERCIAL – Greatness is in the details! Add a touch of elegance to any counter seating space. Industrial grade quality makes this an excellent choice for both commercial and residential settings..
  • COMFORT - Decorative and functional. Bar seating can be uncomfortable for many, provide a comfortable footrest that lets your guests put up their feet and feel right at home!.
  • OIL RUBBED BRONZE FINISH – Features a set of Oil Rubbed Bronze combination brackets and matching rod. One of the most popular bracket styles.
  • it’s mounted to the bar face and rests on the floor for added support and stability..
  • TRIM TO FIT – Rods arrive ready to fit a 8 ft space. Is your space smaller? Measure and trim off the excess before adding on the end caps for a custom fit..
  • QUICK INSTALATION - Everything you need to transform your counter seating in under an hour. Kit includes: (2) 4 ft. Tubes, (3) Combination Brackets, (2) End Caps, (1) Tube Splicer, and Screws..
Check Stock

SALUTUY 1080P Video Wall Controller, Video Wall Controller 110-240V 2X2 LED Video Wall Controller for Family for Monitor Room Stock Analysis Conference Demonstration(#1)

  • It is powered by 12V and has over-current protection for stable performance..
  • Made of metal material, anti-interference, corrosion resistance, easy heat dissipation and long service life..
  • This 2X2 splicer supports 1 input and 4 outputs. The main function is to divide a complete high-definition image signal into 4 blocks and assign them to 4 video display units (such as rear projection unit, LCD TV, etc.). ), complete a large screen with a dynamic image composed of 4 HD video display units..
  • The gold-plated interface effectively reduces data transmission loss and improves signal transmission efficiency..
  • Support HDMI1.3 input, support 4 output. Supports 1920 x 1080P 24/30/50/60Hz and below input. Support 1920 x 1080P@60Hz HD resolution output..
Check Stock