ReviewsCable Terminal Ends Brass

Buachois 2 Sets 50A 6AWG 600V Battery Connector Plug Lightweight Quick Connect Disconnect Wire Harness Plug Kit Towing Winch Quick Connect Systems(Black)

  • Wide range of applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • Size information: voltage: 12-36 volts DC.
  • package comes with 6 sets 2-4 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
  • Quality and durable material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
  • Convenient installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable working environment: there are 12 pieces terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.
Check Stock

ODO LUCK Modified Spacer Kit for Fanatec Clubsport V3 Pedal Brake Reposition and Clutch Delete,Modification Accessories

  • [4 WAY BATTERY TERMINAL] Made of high-quality brass and steel material which is corrosion resistant with excellent electrical conductivity that can reduce voltage distortion and transmission loss. And it has 4 ports for multiple cable connections, wiring is easy and convenient to modify..
  • [POSITIVE & NEGATIVE LABELED] Positive and Negative is clearly labeled on the battery terminal connectors that you can easily recognize..
  • [WIDELY USE] Our battery terminal connectors are compatible with cars, vans, caravan, tachts, trucks, pickups, buses, etc. Works on round post auto batteries SAE/JIS Type A posts. Please be sure to connect correct terminal to correct polarity..
  • [EASY TO USE] Equipped with a hex wrench which can help you to complete installation more convenient and easier. And it only takes a minute to clean, use the terminal cleaning brush that we provided to clean dirt, debris and corrosion. The products included can fully meet your need..
  • [WHAT YOU RECEIVE] Package contains 2 battery terminal connectors (positive and negative), 4 insulation sleeves, 2 battery terminal clea....
Check Stock

Dinkle DSS2.5N-02P DIN Rail Terminal Block Press-Fit Jumper DK2.5N Two Pole, Pack of 20

  • ❶PACKAGE - 10 x Fork Type Terminal Wire Jumper Block, 12 Positions..
  • ❷MATERIAL - Wire Terminal is made of brass with good electrical conductivity, nickel plating on the outer layer to prevent oxidation..
  • ❸DESIGN - The frame type wiring structure is suitable for round copper wire connection applications of unprocessed and live crimped tubular ends..
  • ❹APPLICATION - Used widely in various wire connection, such as machine, electric power, home appliance, computer or other automatic equipments..
  • ❺NOTICE - We are gradually changing the product brand name to "Xiaoyztan", due to different shipment batches, you may receive our old brand labels. Please don't worry and just identify the seller "Brisky Top"..
Check Stock

150 Pcs 2.8/4.8/6.3mm Quick Splice Male and Female Wire Spade Connectors Wire Crimp Terminal Block Assortment Kit with Insulating Sleeve for Electrical Wiring Car Audio Speaker Connectors

  • Premium Material: The speaker wire connectors are made of highly conductive brass-coated tin material, which is oxidation resistant and durable. The insulating sleeves are made of nylon which is fire retardant and safe..
  • Easy to Use: The spade terminal connectors can grip the cable insulation or the cable itself well and provide a secure grip. Simply connect the male and female terminals at both ends, then the male and female terminals are inserted to complete the wiring..
  • Easy to Store: All electrical spade connectors and insulated sleeves are packed in a plastic storage box, easy to carry and find, easy to store and carry..
  • Wide Applications: The female and male spade connectors are suitable for most appliance switches, cars, batteries, audio equipment, household appliances, electronic components with pins, etc. Widely used in household, industry and other electronic field..
  • Package Includes: You will receive 30 pieces 2.8 male and female, 30 pieces 4.8 male and female, 30 pieces 6.3 male and female, 15 pieces 4.0 round connectors, 15 pieces long insulation sleeves and 15 pieces short insulated sleeves, total 150 pieces, enough for daily use..
Check Stock

iCrimp AP-50BI Battery Cable Ring Terminal Crimper for 8 6 4 2AWG Copper Cable Lugs Heavy Duty Wire Lugs and Battery Cable Ends

  • Purpose: AP-50BI battery cable terminal crimping tool is designed to crimp 8, 6, 4, 2AWG copper / tinned eyelets in special trapezoid profile..
  • Suitable for: Heavy duty wire lugs, battery cable ends, bare copper eyelets, tubular ring terminal connectors..
  • Rotary Die Set: Rotating color coded jaw allows easy identification and one hand die change..
  • Ratchet mechanism assures a full cycle crimp before releasing and provides stable platform for repeatable terminations.Release trigger helps clear mis-crimps and obstructions easily..
  • Comfort grip handles helps reduce fatigue during common use.Eccentric adjustment button to adjust the tool to obtain the proper force value..
Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....
Check Stock

Kaunosta SMA Cable 6.5ft SMA Male to SMA Male RF Coaxial Extension Cable for Security System Antenna Input RG316 Wire Jumper

  • 【SMA jumper cable】RG316 male to male SMA extension cable.The connector housing and pin in center are made of pure brass to ensure a lower VSWR for higher transmission efficiency..
  • 【Character】RG316 SMA male to male coaxial cable with high temperature resistance, acid and alkali resistance, corrosion resistance, high frequency, low loss and low impedance, wide applicability. Compared to rg174 cables, rg316 cables have better performance in terms of signal attenuation and transmission delay..
  • 【Common applications】Used for SDR Dongle、FPV Drone、LTE hotspot etc.(such as:used on your FPV ground station to mount the antennas on the camera tripods.
  • This sma male extension cable is great if you are going to have a semi-permanent antenna mount in your car.).
  • 【Widely used】To extend the cord for the antenna included with the phone terminal, onvian fixed wireless terminal GSM gateway 850/900/1800/1900MHz wireless access platform pstn dialer LED etc..
  • 【Package】1 x RG316 sma male to sma male cable.The cable has a length of 2 meter(6ft), so the position of the connector can be adjusted appropriately according to the usage scenario..
Check Stock

Car Battery Terminal Connectors, 2 Pcs 4 Way Quick Release Disconnect Car Battery Terminal for SAE/JIS Type A Posts, Compatible With Cars, Vans, Trucks and More

  • [4 WAY BATTERY TERMINAL] Made of high-quality brass and steel material which is corrosion resistant with excellent electrical conductivity that can reduce voltage distortion and transmission loss. And it has 4 ports for multiple cable connections, wiring is easy and convenient to modify..
  • [POSITIVE & NEGATIVE LABELED] Positive and Negative is clearly labeled on the battery terminal connectors that you can easily recognize..
  • [WIDELY USE] Our battery terminal connectors are compatible with cars, vans, caravan, tachts, trucks, pickups, buses, etc. Works on round post auto batteries SAE/JIS Type A posts. Please be sure to connect correct terminal to correct polarity..
  • [EASY TO USE] Equipped with a hex wrench which can help you to complete installation more convenient and easier. And it only takes a minute to clean, use the terminal cleaning brush that we provided to clean dirt, debris and corrosion. The products included can fully meet your need..
  • [WHAT YOU RECEIVE] Package contains 2 battery terminal connectors (positive and negative), 4 insulation sleeves, 2 battery terminal cleaning brushes, 2 battery anti-corrosion washers and a hex wrench. Please feel free to let us know if you have any concerns or questions about our products, our customer service team....
Check Stock

Qishare 15 Pcs Dual Row 4 Position Screw Barrier Terminal Block 600V 15A + 400V 15A 4 Postions Pre Insulated Terminal Barrier Strip Red/Black 10 Pcs(15A 4P)

  • 400V 15A 4P Fork Type Terminal Stripe, Material: Brass, PVC..
  • 600V 15A 4P (Dual Row) Barrier Terminal Block,Strip Material: Brass, Screw: Zinc plated Iron..
  • Each pair of barrier terminal block is insulated from the next, prevent circuit in disorder. The furcate pre-insulated terminal is easy to connect with electrical wire to strengthen its reliability and safety..
  • Base with high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance (transparent dust cover is not flame retardant). High-quality brass guide, excellent electrical conductivity, the appearance of nickel-plated, rust and durable..
  • Package included: 5 x Barrier Terminal Block.
Check Stock

Hi-Gear Battery Quick Connect Disconnect Electrical Plug kit 2-4 Gauge 175 Amps for Recovery Winch or Trailer by Alfa Wheels (1)

  • ✅Simple Installation - Fits 1/0 Awg cable.
  • Capacity 175 Amps. Just put the cable in terminal (DIA: 0.433 inch), solder or crimp them, then slide them into the back of plug and lock in place.
  • ✅PC Housing - The shell of the battery quick connector made of PC materials, which makes it sturdy and reliable with the perfect continuity and fire-retardant to bad environment.
  • ✅High Conductivity - The terminal of these winch battery quick connect are made from silver plated copper, it has strong high conductivity also keep a stable voltage and current.
  • ✅Wide Application - Our battery quick connector provides a simple and convenient method for connect/disconnect power to a winch or other electrical device.
  • ✅Safe Contact - These battery connectors ends are constructed with Spring steel, that ensures an excellent impact resistance and vibration resistance for the batteries.
Check Stock

Top Post Battery Terminals End for Marine Car Boat RV Vehicles Negative and Positive Post 2PCS

  • Function: This battery terminal is used as a connector to increase the efficiency and reduce corrosion..
  • Size: The battery terminal ends have a 3/8’’ lugs mounting with a 5/16’’ diameter short bolt..
  • Fitment: The terminal ends can be used on car, vehicle, RV and boats. They can also be used on the devices which has 19mm tapering positive & 17mm tapering negative..
  • Material: The battery ends are made of zinc alloy, which is totally rust and corrosion resistant..
  • Warranty: We offer one year warranty for the blade switch. If you are not satisfied with it, simply contact us and get your refund..
Check Stock