ReviewsCable Tie Mounting Base

BestMounts - Low Voltage Nail-ON Mounting Bracket 1 Gang Multipurpose New Construction – (10 Pack, Yellow)

  • Nail On Low Voltage Mounting Brackets for New Construction.
  • Nail on, Single gang, Low Voltage mounting bracket for new construction on wood studs. Built in loop to tie off cable..
  • Lower cost than extension rings or mud rings.
  • Ready to install - nails come parked in-place , Easy, secure mounting of bracket to studs.
  • Allows wall plate to mount flush with wall surface , 25% faster installation over steel or plastic mud rings!.
Check Stock

Cascillo Universal TV Stand, Wooden Base Tabletop TV Base for 32 to 55 Inch OLED LED LCD TVs, Height Adjustable TV Mount Stand with Wire Management, VESA 400x400mm,Holds up to 99lbs

  • UNIVERSAL DESIGN HOLDS UP TO 99LBS: This Universal TV Stand base is Universal TV mount bracket design fits most 32'' - 55'' flat-screen LCD/LED/OLED/ TVs up to 99lbs(45kg), VESA(mounting hole pattern):400x400mm 400x300mm 300x300mm 300x200mm 200x200mm 200x100mm 100x100mm.Compatible with Sony/Samsung/Vizio/Sharp/TCL/Hisense/LG TVs..
  • WOODEN BASE BASE & SAFETY FOR KIDS/PETS: This TV mount Stand is designed with wooden base,perfectly solve the fragile problem of the glass base and give an added touch to your home theater system.High quality steel construction ensures safety, protecting the television from your kids/pets so it would not knock them over..
  • 6 MOUNTING HEIGHT OPTIONS OF HEIGHT ADJUSTMENT: This table top TV stand has 6 options 2 ways mounting height for optimal viewing. Mount plate features 3 levels of height adjustment, each height can be adjusted by 2 inch(5 cm) to meet different TV sizes or seating height requirements.
  • TV brackets can also be adjusted at 2 height levels by 1.97 inch(5 cm)..
  • CABLE MANAGEMENT & EASY TO INSTALL : Cable management system conceals those messy wires to make the entertainment unit neat and tidy. This TV base is Easy and quick to install in 15 minutes or less and includes all the hard....
Check Stock

Tie Down Strap Rings Tie-Down Anchors Hooks Stainless Steel Lashing Rings with Red Powder Coating for Tiedown Attachment Points for Dirt Bike, Motorcycle, Trailer, Pickup, Truck,Camper,RV (Pack of 10)

  • ...d for better friction. Stand up to the toughest weather, protects against corrosion and rust for long-term use..
  • ✅【Dimensions】- The tie down hook ring with a length of 1.8", a width of 1.1", a height of 0.6" and a thickness of 3mm. The diameters of the mounting hole and anchor hole are 10mm and 20mm respectively. The angle between the mounting surface and the tie-down surface is 135 degrees, see the mechanical sketch image for a visual guide..
Check Stock

Mobile Radio Antenna Car VHF Antenna Dual Band UHF 136-174MHz 400-520MHz UHF Antenna Car Magnetic Antenna Pl259 Male with 10ft RG58 Cable for Ham Radio, Gmrs, Yaesu, Two Way Radio Vehicle Truck SUV

  • High Gain & Low SWR - This car vhf uhf magnetic antenna features with 3dB of gain,improving signal transfer and making it sound clearly.SWR is 1.8. No obvious rising.100% highly shield performance.Works well with your radio,it will help improve your signal by mounting the antenna on any vehicle with a steel body..
  • Magnetic Base Mounting- This car ham radio antenna features with strong magnetic,making it easy to install and will not falling even though suffering strong wind.With 10 ft long Heavy Duty RG-58 cable,you are able to put your antenna on almost any vehicle application..
  • Durable & Waterproof - Well made car uhf magnetic antenna, made of waterproof and windproof stainless steel, it is durable to used in harsh environment. It could mount the uhf vhf antenna on any vehicle and allow to get better clear voice and transfer signal accurately.(Package Include:18 inches VHF & UHF Antenna,magnetic Base mounting,10ft RG58 cable with UHF PL259 connector).
Check Stock

Wrangler Authentics mens Long Sleeve Fleece Quarter-zip Pullover Sweater Light Heather Gray Large US

  • High quality material：XHF Adhesive Zip Tie Mounts are manufactured from 3M Strong Adhesive and PA66 nylon..
  • Wire tie downs without tools. Simply peel off the backing paper command strip ​place firmly on a clean, dust-free surface for best adhesion..
  • Anti-Tip furniture anchors,suitable for cars, house and office, can be applied to various cables such as computer cables, TV cables, Christmas lights....
  • Note: Clean the surface of the dust before use,3M glue is best to be glued once and should not be disassembled repeatedly. After applying....
  • 100pcs Cable tie mounting/100PCS 8" zip ties/100PCS Screws..
Check Stock

ErGear Ultrawide Monitor Arm with USB, Monitor Mount Fits 13-35” Screen, Monitor Stand with Full Motion Gas Spring Arm Holds from 4.4lbs to 26.4lbs

  • Fit 13”-35” Screen Desk Mount: Heavy-duty Arm provides powerful support for your ultrawide monitors, holds up to a 26.5lbs.With 75*75mm or 100*100mm backside VESA..
  • Customize Your Screen Angle: Easy height adjustment, Up-down Tilt: +85°/-30° Rotate：360° Swivel：±90°,provides vertical and horizontal monitor shifts for different requirements to improve work efficiency..
  • Clamp Base & Grommet Mounting: You may choose to clamp the base to the edge of the desk. Grommet Mounting allows free location on the desktop where a mounting hole exists..
  • Stability - The solid construction and stable clamp/grommet base provide stable and secure holding for your monitors..
  • Integrated Cable Management & USB Connector: lifted monitor and concealed cables give you a messy-free desktop enjoyment. The package includes all accessories for mounting and access for instant mounting guidance..
Check Stock

DC Cargo Mall 4 D-Ring Tie-Downs with Plastic Pan Fittings, Anchor Trailer Cargo Load with Floor Flush Surface Mount D-Rings; Safe Tie-Down Working Limit 533 pounds

  • ✔ FLUSH MOUNT D-RINGS: 4 Pack | This bolt-on D-ring lies flush in its rugged plastic pan fitting so the D-ring doesn’t hazardously protrude from the floor. Galvanized steel means its zinc coated for corrosion and rust resistance and well-built to last. Working Load Limit: 533 pounds. NOTE: Mounting hardware is NOT included..
  • ✔ ANCHOR ACTION: So you’ve got a (utility, enclosed, cargo, travel, snowmobile) trailer, pickup, truck, flatbed or cargo van. And you’d like to tie down your (motorcycle, bike, snowmobile, ATV, go-cart, landscaping equipment, farm tools, appliances, camping gear, delivery boxes, lumber) load. Maybe you’ve got a bike bench or pool deck in need of anchor spots. These flush D-ring tie-downs are designed for everyday use and provide you with a lifetime of dependable strength and versatility..
  • ✔ DIMENSIONS: The 2 1/4" x 2" D-ring has an attached welded bolting clip with a 3/8" diameter hole. Easily attach S-hook or J-hook straps, bungee cords, motorcycle tie-downs, ropes, chains and soft loops through the ring’s 1-1/2 by 1-13/16” inner clearance. The 4” pan-fitting anchors the 1/4" diameter D-ring in place for a secure hold. See the images for a detailed sketch with all the dimensions of these tie-downs..
Check Stock

XHF 3/4\ Strong Back-Glue Self Adhesive Black Cable Zip Tie Mounts 100pcs with 8\ Zip Ties, Screws, UV Protection Outdoor Sticky Wire Fasteners Cable Clips Management Anchors Organizer Holders Squares

  • High quality material：XHF Adhesive Zip Tie Mounts are manufactured from 3M Strong Adhesive and PA66 nylon..
  • Wire tie downs without tools. Simply peel off the backing paper command strip ​place firmly on a clean, dust-free surface for best adhesion..
  • Anti-Tip furniture anchors,suitable for cars, house and office, can be applied to various cables such as computer cables, TV cables, Christmas lights cable, USB cables and so on.
  • Note: Clean the surface of the dust before use,3M glue is best to be glued once and should not be disassembled repeatedly. After applying self-adhesive glue, it should be used 24 hours apart..
  • 100pcs Cable tie mounting/100PCS 8" zip ties/100PCS Screws..
Check Stock

Cable Tie Gun Tool By ZNXN, Metal Zip Tie Tool Set With 200pcs Self-locking Stainless Steel Cable Ties Width4.6MM Length270MM,11.3 x 6.69 x 1.85 inches

  • [Package Detailes]:1pc stainless steel cable tie tool and 200pcs self-locking stainless steel cable ties 4.6MM*270MM*0.25MM.
  • [Application of Cable Tie Tool]:This kind stainless steel zip tie tool is mostly used for self-locking stainless steel cable ties for fastening and tensioning cutting..
  • [Cutting Range of Metal Zip Tie Tool]:This kind stainless steel cable tie tool is suitable for self-locking stainless steel cable ties width 4.6MM-12.0MM, thickness within 0.3MM.
  • [Type of Cable Ties]:This cable ties is stainless steel cable ties with self-locking function, so don't worry about the loosen after cable tie tool fastenting and tensioning and cutting this cable ties..
  • [How To Use]:After the stainless steel cable tie is tightened, pull up the cutter bar of metal cable tie tool, then the stainless steel cable tie will be cut off easily and cleanly without sharp edges..
Check Stock

Cable Tie Mount 0.75 Inch 20mm Black Samll Squares Adhesive Mounting, 100 Pieces.perfect for Wire Clips Cable Management Zip Tie Anchors,Durability Pro-grade UV Wire Holder

  • NOTE: Self-adhesive replacement is self-adhesive, better peelability and stronger viscosity than the original. PS: Since FBA may still have old products, the product upgrades but the price remains the same. Friends who receive green self-adhesive can contact us..
  • INDUSTRIAL ADHESION—Our Cable Management are not only high-strength ADHESIVE but also have screw hole.Perfect large size and the hole fits a large range of cable ties .Simply stick this cable ties to the place you want to use (make sure the surface is clean flat and dry). Wait 15 seconds or so to maximize the adhesiveness of the tape..
  • MUTIPAL APPLICATION — This zip tie mount base can be used in indoor or outdoor.Such as, indoors,our Wire Tie Holder work really well for guiding cords along the undersides of desks and tables, and can also be used along walls or other flat Surface .you can use it to hide cables and power cables to make your desktops tidy.Outdoors, you can use these Cable Tie Mount to secure the LED strips and some messy wiring. At the same time, they are great for hiding the wires under the bumper..
  • LIFETIME MONEY BACK GUARANTEE! — We stand behind all of our products. If you’re not 100% COMPLETELY SATISFIED, just send us an email,....
Check Stock

Universal TV Stand Base Table Top TV Stand for 27-55 inch LCD LED TVs,Height Adjustable TV Base Stand with Tempered Glass Base and Cable Management,Black

  • ►【Universal TV Stand Base Without Drilling Holes In the Wall】: Yomt universal tv stand base fits most 27 to 55 inch LCD, LED, Plasma,curved TVs like Samsung, Sony, LG, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, and TCL. Fits VESA (mounting hole pattern) : 100x100mm (4”x4”) 200x100mm (8"x4") 200x200mm(8"x8") 300x200mm (12"x8") 300x300mm (12"x12") 400x200mm (16"x8")400x300mm (16"x12") 400x400mm (16"x16"). This TV riser to mount your tv perfectly without drilling in the wall..
  • ►【TV Legs with Easy Assembly】: This tv legs convininently used as lg tv legs,Samsung tv stand base replacementfor 27-55 inch tv comes with an easy to use instruction manual for quick and easy installation,also a lot of extra mounting hardwares included for mounting your tv very convininently and 2 locks to keep the tv in place and safe..
  • ►【Solid TV Stand for 50 inch TV】 : The TV table top stand made of heavy duty metal construction and thick glass base,hold your TV with safety and stability.This small tv stand hold up to 88lbs and works effectively for TV's that have lost the original legs and looks nicer..
  • ►【Adjustable TV Mount Stand】 : Our tv mount stand for 32 inch tv has 5 positions height adjustment....
Check Stock