ReviewsCadence Sensor For Spin Bike

COOSPO Speed Cadence Sensor, Bluetooth & ANT+ 2-in-1 Cycling Sensors with LED Indicators, IP67 Waterproof Bicycle RPM Sensor Works with Wahoo, Zwift, Openrider, Peloton

  • The BK805 cadence speed sensor wirelessly transmits your speed and cadence data to compatible bike computers or cycling Apps simultaneously to help you monitor your cycling performance..
  • Integrated with ANT+ and Bluetooth technology allows you to connect and sensor with GPS bike computers, smartwatches, and fitness equipment for better data when you ride indoors and outdoors..
  • LED light indicator, every time changing the battery, will enter the debugging state for 15 minutes, during this state, after install the speed sensor correctly and rotates the wheel, it will flash blue light.
  • After installed the cadence sensor correctly and turn the crank, it will flash a green light..
  • 500 hours Battery Life, using a replaceable coin cell battery( CR2032), BK805 can last up to 500 hours of the ride..
  • Training with CoospoRide APP, real-time cadence and speed data will be displayed directly on the phone during your ride. Also compatible with most mainstream apps like Wahoo fitness, Zwift, Rouvy, Peloton, Cyclemeter, etc..
Check Stock

iGPSPORT Bike Speed Sensor ANT+ & Bluetooth RPM Cycling Speed Sensor, Wireless Bicycle Sensor for Cycling Computer, Compatible with Zwift, Rouvy, IPX7 with 300H Battery Life

  • Bluetooth & ANT+: Supports all kinds of equipments and applications which collect speed or cadence data via Bluetooth or ANT+.
  • Compatible with Cycling Computer and fitness app like Zwift, Rouvy.
  • Multi -performance: IPX7 waterproof, comes with several of rubber bands and zip tie mounts for more secure installation.
  • Low energy, equipped with a replaceable CR2025 Coin Cell Battery can be continue use up to 300 hours.
  • Easy to install: Fit the sensor to the bike,speed sensor goes on the front/rear wheel hub and the cadence goes on the peddle bars.
  • The mounts supplied are rubber bands and easy to fit and strong.
  • Lightweight and portable: The mass of the pedaling and speed sensor is only 7.8g, so it will not cause inconvenience to cycling when mounted on the bike, and the compact design can be easily carried by cycling enthusiasts.
  • Fitting healthful: Using bike computer, speed sensor, cadence sensor started recording straight away.
  • When finished, you can view the results though your app.
  • Make riding run and it’s really interesting to read your stats though stave.
Check Stock

XOSS Vortex Cadence and Speed Sensor Wireless IPX7 Waterproof - 300 Hours Dual Modes Bike Sensor ANT+/Bluetooth 4.0 Compatible for Cycling Computer - 2 Pack

  • 【Speed & Cadence Dual Mode】XOSS VORTEX Cycling sensor has two modes: Speed/Cadence Mode. Connects Through ANT+/Bluetooth, You can fast switch mode via XOSS APP anytime you want. VORTEX also compatible with other devices, you can consult us for details *To get both speed and cadence data, you need to install two sensors. Only one mode is available at the same time..
  • 【Accurate Data & XOSS APP Support】Through VORTEX speed and cadence sensor, your cycling data is more accurate than GPS. Real cadence in real-time to pace your cycling on XOSS bike computer and XOSS App..
  • 【New Design】The shell of the XOSS VORTEX bike sensor uses a spiral trapezoid shape which not only fits better to the surface of the crank and hub but also conforms better to the principles of aerodynamic design and The sense of speed of riding..
  • 【IPX7 Waterproof】Prevent water and dust, make your riding better and better in extreme weather..
  • 【Attention】You can use it with other outdoor cycling apps, XOSS APP currently does not support recording indoor cycling activities. Please watch the tutorial video of the VORTEX before use..
Check Stock

XOSS X1 Suite Bike Speed and Cadence Sensor Bicycle Speedometer ANT Bluetooth 4.0 for Wireless Cycle Computer

  • 【Support ANT+ & BLUETOOTH 4.0】The sensor is compatible with all devices that support ANT+ protocol, such as Garmin, Bryton, XOSS G+ and other cycling computer. Support Bluetooth connection for Zwift, Tacx, Bkool and other cycling training APPs. Note: The sensors only support recording of Cadence in indoor training..
  • 【Support dual protocol connection】 One sensor can connect to both mobile phone APP and ANT+ device to record data at the same time. Please do not connect the sensor directly in the Bluetooth settings of your phone..
  • 【Powerful XOSS APP support】XOSS is professional outdoor sports APP. Install X1 suite speed and cadence sensor and connect to XOSS APP, you can read the recorded speed cadence data in real time and get the movement track after the ride. Help you to scientifically analyze sports data to improve your sports performance..
  • 【Easy to install】100% wireless and no magnets required. The cadence sensor is mounted to the crank of the bike and the speed sensor is mounted to the hub of the wheel..
  • 【ATTENTION】Please read the product description and video tutorial carefully before purchase to confirm if XOSS X1 Suite Speed and Cadence Sensor is compatible with your device or mobile app. If you have any questions, please feel f....
Check Stock

iGPSPORT C61 Cadence Sensor ANT+ and Bluetooth Wireless for Cycling Computer Sport Watch Mobilephone, Black, One Size

  • Only a cadense sensor.Capture cycling cadence data on any bike computer(Required ANT+) via ANT+ or training APP in mobile via Bluetooth.
  • Easy to install, maintain and move between bikes - No magnets. Cadence sensor easily attaches to your bike's crank arm.
  • ANT+ and Bluetooth: Compatible with any ANT+ equipment such as Garmin,Bryton,Polar,Wahoo,iGPSPORT bike computer and more.
  • Compatible with most of mainstream training APP (via Bluetooth) ,such as Wahoo fitness,iGPSPORT,Zwift,Runtastic Road Bike and many more.
  • Long battery life: Normal use for a year(one hour per day).
Check Stock

LIVLOV V4 Bike Cadence Sensor, Bluetooth & ANT+ Cycling Cadence Wireless Bicycle Cadence Sensor IP67 Waterproof for Zwift Elite HRV Endomondo Peloton Bike Computers

  • 【BLUETOOTH & ANT+ DUAL-PROTOCOL】Use the LIVLOV V4 sensor to accurately track your cycling cadence in real-time. Connect the cadence sensor to the bicycle computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth..
  • 【WIDE COMPATIBILITY】The RPM cadence sensor is compatible with most mainstream iOS and Android fitness apps: Zwift, TrainerRoad, Rouvy, Cyclemeter, Openrider, Tacx, RideWithGPS, Peloton, etc. If you want to confirm compatibility with your app, please send us a message on Amazon..
  • 【LIGHTWEIGHT and EASY to INSTALL】Size only 38.5mm×38mm×12mm & weight only 10.5g. No magnets, wireless sensor, it can be easily attached to your bike’s crank arm or shoes through the included rubber-elastic rings and double-sided tape..
  • 【BUILD QUALITY】V4 cadence sensor is waterproof, sweatproof and dustproof. Built-in replaceable CR2032 button battery, battery life up to 500 hours / wireless signal strength up to 20 feet. Easy to replace, use the coin to unscrew and replace the battery. Please remember to remove the battery insulation sheet before installation..
  • 【NOTE】Remove the insulating sheet of the pre-installed battery before usage, re-install the battery to switch between the speed and cadence mode. Unlimited cadence se....
Check Stock

CooSpo Bundle Promotion Cycling GPS Computer Bike Speedometer Wireless Bike Computer Bicycle Odometer & CooSpo Cadence Sensor Bluetooth4.0 ANT+ Cycling Cadence Bike Speed Sensor

  • Accurate GPS Positioning: Coospo new GPS bike computer has 2 modes of global positioning (GPS / GPS& BEIDOU), which can provideaccurate GPS data all over the world. You can also close GPS for indoor cycling. Attention: First time positioning will take 3-5 minutes, please make sure you are outdoor..
  • Supports Sensor connection by ANT+：Coospo cycling gps computer can support heart rate monitor, speed and cadence sensor, power meter connection through ANT+，All cycling data you will get if sensor connection with bike computer..
  • CooSpoRide APP Support: By using CoospoRide App, you can set bike computer very easily on your phone, such as: quickly connect and easily set the device, load GPS track route map, record and analyze cycling activity records, update the latest firmware and so on..
  • RPM Cycling Sensor - Track and capture real-time cycling cadence or speed data on your bike computer or smartphone with compatible training apps.
  • Bluetooth & Ant+ Connectivity - Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers..
Check Stock

DREAM SPORT Wireless Bike Computer with Cadence Speed Sensor Heart Rate Monitor 38Function Speedometer Odometer Backlight Altimeter Calorie DCY438

  • [Wireless & Independent ] Dream Sport bike computer DCY438 with heart rate monitor chest belt, cadence sensor, speed sensor. Large LCD, Backlight, Clear display, Small size (1.8*2.4*0.8 inch), Waterproof. As your best partner and professional heart rate monitoring expert when you're riding, no matter day or night, sunny or rainy..
  • [Multi-Functions] Basic 38 functions & Heart Rate Monitor & Cadence Mode & two button to read your speed, cadence, heart rate, odometer statistics easily. Heart Rate / Altimeter / Cadence / Speedometer / Distance / Automation Scan/ Start/ Stop / Odometer & Save / Auto Trip Time / Digital clocks / Average Speedometer / Max Speedometer / Speed Tendency / KM or MPH select / Freeze Fame Memory / Auto Power / Temperature (℃ or F) / Waterproof and other functions also equipped..
  • [Easy to install and use] Speed: Install speed sensor on your fork, magnet on the spoke. Cadence: Install cadence sensor on chain stay near the crank, another magnet will be tied on the crank arm. Really Important: Adjust the distance between sensors and magnets with max. 0.2 inch! HRM: HR sensor should be placed in the central position near your heart and Dream Sport logo should be upright..
  • [View data from your professional coach....
Check Stock

DREAM SPORT Wireless Bike Computer with Cadence Speed Sensor Heart Rate Monitor Speedometer Odometer with Backlight Altimeter HRM Calories Black (DCY438)

  • [Wireless & Independent ] Dream Sport bike computer DCY438 with heart rate monitor chest belt, cadence sensor, speed sensor. Large LCD, Backlight, Clear display, Small size (1.8*2.4*0.8 inch), Waterproof. As your best partner and professional heart rate monitoring expert when you're riding, no matter day or night, sunny or rainy..
  • [Multi-Functions] Basic 38 functions & Heart Rate Monitor & Cadence Mode & two button to read your speed, cadence, heart rate, odometer statistics easily. Heart Rate / Altimeter / Cadence / Speedometer / Distance / Automation Scan/ Start/ Stop / Odometer & Save / Auto Trip Time / Digital clocks / Average Speedometer / Max Speedometer / Speed Tendency / KM or MPH select / Freeze Fame Memory / Auto Power / Temperature (℃ or F) / Waterproof and other functions also equipped..
  • [Easy to install and use] Speed: Install speed sensor on your fork, magnet on the spoke. Cadence: Install cadence sensor on chain stay near the crank, another magnet will be tied on the crank arm. Really Important: Adjust the distance between sensors and magnets with max. 0.2 inch! HRM: HR sensor should be placed in the central position near your heart and Dream Sport logo should be upright..
  • [View data from your professional coach] Press right button....
Check Stock

CooSpo Cadence and Speed Sensor,2 in 1 Bluetooth ANT+ RPM Cycling Cadence Sensor,Wireless Bike Speed Sensor for Bicycle,Compatible Cycling Computer Runtastic Pro, Zwift, UA Run, Rouvy,Openrider

  • ✅Tracking Cadence and Speed Sensor: Accurately monitor real-time both cycling speed and cadence, also provide distance data for compatible Android/iOS APP/GPS bike computers..
  • ✅Bluetooth & ANT+: Compatible with Smart bluetooth and ANT+ connection, support connected with most of fitness app/bike computer..
  • ✅Flexible installation: BK805 bike speed and cadence sensor can fit with most bikes and frame sizes with the adjustable mounting..
  • ✅Fitness Apps Compatible: Compatible with fitness app like Coosporide/ Runtastic Pro/ Zwift/UA Run/ Openrider/ Endomondo/MapMyRide, More APP compatible welcome to update to CooSpo..
  • ✅CooSpo BK805 Performance: IP67 waterproof, comes with several of rubber bands and zip tie mounts for more secure installation. Low energy, equipped with a replaceable CR2032 Coin Cell Battery can be continue use up to 500hrs..
Check Stock

CooSpo Heart Rate Monitor Chest Strap Bike Cadence and Speed Sensor with Bluetooth Ant+ Dual Mode

  • TRACK REAL TIME HERAT RATE - CooSpo ANT+ heart rate monitor helps you track and capture real time heart rate.
  • BLUETOOTH & ANT+ PAIRING - Allows you to connect to bike computers, gym machines, phones, and smart-watches to allow you to track your training even if you exercise in a variety of different ways..
  • RPM CADENCE AND SPEED SENSOR - Track and capture real-time cycling cadence and speed data on your bike computer or smartphone with compatible training apps.
  • It comes with two sensors that you can track RPM cadence and bike speed at once..
Check Stock