ReviewsCadillac Valve Stems

Tire Valve Stem Tool Remover & Installation Set- 10pcs Tire Snap in Short Rubber TR412 Valve Stem with Valve Stem Cores,EASILY REPLACE Your Old Tubeless Valve Stems,Single Head Tire Valve Core Remover

  • 【Package Includes】: 1x Heavy Duty Valve Stem Puller Installer Tool,10x TR412 Valve Stem(Built-in Valve Cores.), 10x Extra Schrader Valve Core,1x Valve Core Remover Tool,2x Valve core remover caps.All the tools needed to complete the job..
  • 【Easy To Install】Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems..
  • 【Tool Advantages】The tool sets easy to carry and use. Quickly remove or install the the tire valve.pulls out the valve stem with the principle of leverage, which can save your effort effectively..
  • 【Compatible】Suitable for repair of tubeless tires for passenger cars, motorcycles, ATVs, off-road vehicles and trucks..
  • 【Value】Bonus One valve vore remover and Ten valve stem core,Never worry about valve leakage..
Check Stock

GrillPro 25960 Chrome Look Replacement Control Knobs Will Fit Large D Shaped Valve Stems

  • Fits Large "D" shaped valve stems and For use with propane or natural gas barbecues.
  • Designed for large valve stems of various depths only.
  • Will not fit small valve stems, specifically Weber Spirit and CharBroil Stainless series grills.
Check Stock

Hromee Tire Valve Stem Tool Puller and Installer Kit, 4PCS TR413 Tubeless Snap-in Valve Stem with Valve Stem Cores, Single Head Valve Core Remover and Slotted-Head Valve Cap

  • OFF-SET HEAD - Unlike other straight heads, Hromee valve stem remover and Installer is designed with a off-set and pivoting head, more convenient and easier to use. There is the thread inside the swivel head for screwing into cap that makes you install and remove valve stems without removing the valve core. The pivoting head is for optimal angle..
  • PROTECTIVE DESIGN - On the handle part knurled finish steel is designed for increasing friction and ensure safety while using. The rubber bumper is for protecting wheel and rim from damage. 12.6-inches long to provide more leverage necessary to remove stubborn valve stems with less effort. This remover and installer definitely a good helper for changing the valve stem..
  • TR413 VALVE STEM - Snap-in rubber car tire valve stems for tubeless 0.453” (11.5mm) diameter rim holes. Outside EPDM rubber is for ozone resistance. Apply for 65 PSI max cold inflation pressure and max rim thickness of 0.156”. fits cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles..
  • Slotted-Head Valve Cap - 2 Pieces of valve remover caps are equipped in this kit. 2 in 1 valve caps are made of premium material, strong and durable to use. The top slot head can be used to remove valve cores and the bottom can....
Check Stock

4L60E 4L65E 4L70E 4L75E Transmission Shift Kit Valve Body Rebuild Kit

  • ...30298,10478120,10478112,10478131,AKA 4l60E Shift Kit,4l65E Shift Solenoid,4l60E Shift,24230298 OEM,94 4l60E,94 4l60E Transmission,93 4l60E Transmission,4l60E Valve,1993 4l60E,4l60E 1-2,4l60E Solenoid..
  • 24208576 Professional Automatic Transmission Fluid Filter Kit for Buick Cadillac Vehicles.Replace OEM Part Number 24208813.AKA 4l60E Filter Kit,4l60E Transmission Filter,4l60E Filter,4l65E Filter,4l65E Transmission Filter..
  • 4L60E Transmission Shift Solenoid Valve Set for 2004 Buick Rainier 2004 2005.
  • For Cadillac Escalade EXT 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005;for Astro 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005.
  • TOP quality Automatic Transmission Filter Kit, also know as Transmission Deep Pan or Transmission Fluid Filter, help to ensure the reliability and performance of your automatic transmission. These filters trap impurities that may be present in the fluid before they get pumped through to the moving components of your transmission, thus avoiding damage. ....
Check Stock

ACCRETION TR415 Rubber Snap-in Tire Valve Stem for Tubeless 0.625 Inch 16 mm Rim Holes on Standard Vehicle Tires (Set of 4)

  • ✅ Design: These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
  • ✅ Purpose: the type of the valve stem is TR-415.
  • This valve stem is approx. 1.25 inch long.
  • Fits for most rime holes of 16 mm/ 0.625 inch in diameter.
  • ✅ EASY TO INSTALL: with bolt-in design, these rubber tire valve stems are very easy and convenient to install,keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • ✅ Superior quality: Ozone tested and 100% leak tested, these tire valve stems are manufactured from EPDM rubber.
  • ✅ Premium TR415 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.625 inches(16 mm), Package Contents: 4 x TR415 Tire Valve Stems.
Check Stock

Tire Valve Stems, 100PCS Rubber Snap-in Tire Valve Stems with Brass Valve Cores, for Auto Motorcycle Wheel Tubeless Rims Holes Replacement Accessories Black (TR413 TR412 TR414)

  • Products include: You will get a total of 100 Valve Stems, enough for you to meet daily replacement and use, and make your wheels look new..
  • High-quality tire valve: This Tire Valve Stem is an excellent replacement for the tire valve stem. Ozone tested and leak-tested, these tire valve stems are manufactured from EPDM rubber and equipped with high-temperature brass valve cores..
  • Practical performance: The tire valve stem can keep the car tires inflated at a stable air pressure level, thereby reducing tire wear..
  • Novel design: three-length replacement tire valve stem adopts a buckle design, which is very convenient to install and disassemble. The valve stem can be easily installed by hand, which saves time and ease..
  • Suitable for vehicle tires: Tubeless Car Wheel Snap-in Valve Stems is suitable for most cars, light trucks, small trailers, unicycles, motorcycles, and bicycles..
Check Stock

ACCRETION TR412 Rubber Snap-in Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires (Set of 4)

  • ✅ Design: These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
  • ✅ Purpose: the type of the valve stem is TR-412.
  • This valve stem is approx. 0.866 inch long.
  • Fits for most rim holes of 11.5 mm/ 0.453 inch in diameter.
  • ✅ EASY TO INSTALL: with bolt-in design, these rubber tire valve stems are very easy and convenient to install, keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • ✅ Superior quality: Ozone tested and 100% leak tested, these tire valve stems are manufactured from EPDM rubber.
  • ✅ Premium TR412 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.453 inches(11.5mm), Package Contents: 4 x TR412 Tire Valve Stems.
Check Stock

Onwon 12 Pieces Snap-in Rubber Tire Valve Stems TR412 11.5mm 0.453 Inch with High Temperature Brass Valve Cores Tyre Valve Stems for Tubeless Rim Holes on Standard Vehicle Tires

  • [Keep Tires Inflated] - Use the Snap-In Short Black Rubber Valve Stem 12-Pack for Tubeless 0.453” Inch 11.5mm Rim Holes on Standard Vehicle Tires to keep your tires inflated at a steady air pressure level and easily check PSI quickly..
  • [Good Quality Tire Valve Stem] - Ozone tested and leak tested, these tire valve stems are manufactured from EPDM rubber and equipped with high temperature brass valve cores..
  • [Abundant Tyre Valve Stems] - 12 pack black tyre valve stems are enough for your spare or replacement.
  • A good accessories for car owners or professional mechanic..
  • [Rubber Valve Stem with a Cap] - The cap of this rubber valve stem can give your wheel a stylish new look and help in keeping the tyre inflated..
  • [Bolt-in Design] - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
Check Stock

ONER Driver Side Valve Cover with Gasket & Bolts Compatible with 1999-2008 Cadillac Escalade, Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon,Replace# 12570427 264-965

  • 【Replacement Part Number】- 12570427 264-965. Before Ordering, Please Confirm Whether The Valve Cover Are Suitable For Your Vehicle To Confirm Compatibility!.
  • 【FIT FOR】 -This Valve Cover Compatible With 1999-2010 Chevy GMC Cadillac Buick Vehicles with 4.8L 5.3L 5.7L 6.0L 6.3L V8 engien. Including Chevy Silverado 1500 2500 3500, Suburban 1500 2500, Express 1500 2500 3500, Tahoe, Avalanche 1500 2500, Trailblazer, Camaro, Corvette, SSR, GMC Sierra 1500 2500 3500, Yukon, Savana 1500 2500 3500, Envoy, Cadillac Escalade, CTS, Buick Rainier, Pontiac GTO, Firebird..
  • 【 Attention】 If Valve Cover Becomes Loose Or If The Gasket Material Fails, The Oil Will Begin To Leak. A Leak Can Cause The Engine To Have A Very Strong Smell Of Burning Oil, And In Some Serious Cases, It Can Even Cause A Fire If Enough Oil Gets Onto The Exhaust System. Finding Out And Replacing It As Soon As Possible Will Help Your Car Drive With High Performance And Safety!.
  • 【Advantage】-Long Service Life, VALVE COVER Is Made Of High-Quality Aluminum Material And High-Quality Sealing Rubber,Designed And Manufactured According To OEM, And The VALVE COVER Are Tested Before Leaving The Factory To Ensure That The Product Quality Meets The Standards.The Price Is Only A Small Part O....
Check Stock

AME INTL Quick Valve Change Tool

Check Stock

150 Pieces TR413 Rubber Snap in Tire Valve Stems Assortment Rubber Black Rubber Snap in Valve Stems Standard Length Replacement Tire Valve Stems for Car Tubeless Rim Holes Replacement

  • One Size Suits Most Cars: each valve stem for tubeless tires measures approx. 0.7 x 1.7 inches, simple for your storage and carry, practical and versatile to use, fitting most cars, lawn mowers, light trucks, small trailers, unicycles, motorcycles and other vehicles.
  • Serve You Long: made of brass and ozone resistant rubber, these snap in tire valve stems are resistant to breakage, deformation, and tear.
  • In addition, they are EPDM, ozone and leak tested, come with high temperature resistant brass spool, with fine reliability, serviceability and performance, able to be applied for a long time.
  • Enhance Safety: these tire valve stems are able to keep your tires inflated at a constant level of air pressure well, helpful to protect your tire from wear and make the car run smoothly, nice accessories for improving the safety of your driving, which can bring big convenience to you.
  • Large Amount to Replace: there are 150 pieces of TR413 valve stems in the package, abundant in quantity, sufficient for you to use, replace in your work and daily life, and you can share them with family members.
  • Please check the model and compatibility information carefully before ordering.
  • Effortless to Install and Disassemble: these black tubeless valve stems adopt snap in design, c....
Check Stock